Editing Talk:Undocumented SPU Channels

== Channel 67 ==

Used to get the config ring. 

Use is similar to channel 73.



<pre>uint8_t expectedConfigRing65[];
uint8_t expectedConfigRing90[];
   
function _start+1340() { //extracted from bootloader on 0x1A datecode console
   
    uint64_t vr = getSPU_VR(); //First active SPE priv1 SPU_VR register
    uint32_t toIgnore;
    uint32_t toRead;
    uint8_t expectedConfigRing;
    uint8_t readedConfigRing[];
    switch (vr) {
        case 0x201:
        case 0x202:
            //90nm console
            toIgnore = 0xA6;
            toRead = 0x156;
            expectedConfigRing = expectedConfigRing90;
            break;
        default:
            //65nm console
            toIgnore = 0xBB;
            toRead = 0x152;
            expectedConfigRing = expectedConfigRing90;
    }
    unsigned int index;
    for (index = 0; index < toIgnore>>3; index++) {
        rdch(67);
    }
    for (index = 0; index < toRead; index++) {
        readedConfigRing[index] = rdch(67) & 0xFF;
    }
    while (moreBitFieldsToCheck) {
        checkConfigRingField(expectedConfigRing, readedConfigRing, field, .....);
    }
   
}</pre>

== Channel 64 ==

Used to control isolation-mode persistent storage (w:ch72/r:ch73) and probably config ring storage (r:ch67).

Other values written to channel 64 (on bootldr): 0x00, 0x02, 0x20000

=== Isolation-mode persistent storage control flags ===

* 0x0 : clear config ring storage?
* 0x2 : call hardware isolation exit function
* (0x1 | 0x2) = 0x3 : call hardware isolation load function, it will wait for isolated binary address through SPU_RdSigNotify1 & SPU_RdSigNotify2
* 0x10000 : reset persistent storage r/w index (writes to ch72 and reads from ch73 will start at index zero)
* 0x20000 : lock persistent storage write
* 0x40000 : lock persistent storage read
* (0x20000 | 0x40000) = 0x60000 : lock persistent storage r/w (reading from ch73 will return zero as long as the current isolated session lasts)

== Channel 13 (SPU_RdMachStat) ==

This channel used for some check before to write 0x60000 to ch64 (appldr, lv1ldr, lv2ldr, isoldr)

<pre>uint32_t spu_machine_status = spu_rdch(13);
if ((spu_machine_status & 0x40000) != 0)
{
  return -1;
}
else
{
  spu_wrch(64, 0x60000);
  return 0;
}
</pre>

== Some observations and questions ==

* spu_rdchcnt() returns 1 on the following channels: 64, 69, 70, 71, 74, but 0 on 73, why?
* It seems that LS isn't erased when calling the isolation load function from ch64, could we take some advantage from that?
* How many other undocumented channels exists? Is there any possibility to determine if specific channel exists?
* What is the purpose of other undocumented channels? H/W decryption facility? Validation? Something else?
* Is it possible to refill config ring storage?
* http://paste.ubuntu.com/23453452/

== Utility functions for channel fuzzing ==

<syntaxhighlight lang="c">
uint32_t get_channel_count(uint32_t n) {
	static uint32_t f[] __attribute__ ((aligned(16))) = {
		0x01E00003, // rchcnt $3, $ch(?)
		0x35000000, // bi $LR
		0x4020007F, // lnop
	};
	f[0] &= ~(0x7F << 7);
	f[0] |= (n & 0x7F) << 7;
	uint32_t (* pf)(void) = (void*)&f;
	si_sync();
	return pf();
}

uint32_t read_channel(uint32_t n) {
	static uint32_t f[] __attribute__ ((aligned(16))) = {
		0x01A00003, // rdch $3, $ch(?)
		0x35000000, // bi $LR
		0x4020007F, // lnop
	};
	f[0] &= ~(0x7F << 7);
	f[0] |= (n & 0x7F) << 7;
	uint32_t (* pf)(void) = (void*)&f;
	si_sync();
	return pf();
}

void write_channel(uint32_t n, uint32_t value) {
	static uint32_t f[] __attribute__ ((aligned(16))) = {
		0x21A00003, // wrch $ch(?), $3
		0x35000000, // bi $LR
		0x4020007F, // lnop
	};
	f[0] &= ~(0x7F << 7);
	f[0] |= (n & 0x7F) << 7;
	void (* pf)(uint32_t) = (void*)&f;
	si_sync();
	pf(value);
}
</syntaxhighlight>