Editing Talk:Regulators

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 5: Line 5:
By looking at the first syscon model used by the PS3 [[CXR713120-201GB]] where we know the names of the pin signals it seems these syscon control lines for voltage regulators could be the syscon pins named SW_x or SW_x_x (switches, used as a generic name for slave components that only has 2 states)
By looking at the first syscon model used by the PS3 [[CXR713120-201GB]] where we know the names of the pin signals it seems these syscon control lines for voltage regulators could be the syscon pins named SW_x or SW_x_x (switches, used as a generic name for slave components that only has 2 states)


==== Mitsumi 463A (STBY) ====
==== Mitsumi 463A (voltage regulator) ====
<div style="float:right">[[File:Mitsumi 463A.jpg|200px|thumb|left|Mitsumi voltage regulator 463A<br />Seen on a JSD-001 motherboard]]</div>
<div style="float:right">[[File:Mitsumi 463A.jpg|200px|thumb|left|Mitsumi voltage regulator 463A<br />Seen on a JSD-001 motherboard]]</div>


Line 12: Line 12:
! Pin # !! Name !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || {{cellcolors|#ff0000}} 5V_EVER || Input 5v standby rail, from power supply (pin 1 of connector CN101)
| 1 || 5V_EVER || From power supply 5v standby rail (pin 1 of connector CN101)
|-
|-
| 2 || {{cellcolors|#ffcc22}} 3.3V_EVER_B || Output 3.3v standby rail 2
| 2 || 3.3V_EVER_B || 3.3v_standby_rail_2
|-
|-
| 3 || {{cellcolors|#33cc33|#ffffff}} RST/SYSCON_RST || Goes under package to the black 100 ohm resistor at its right, and from there to syscon pin26@[[SW2-303]]
| 3 || ? || Goes under package to the black 100 ohm resistor at its right, and from there to syscon pin26@[[SW2-303]]
|-
|-
| 4 || ? || Goes under package to squared testpad/sinkhole at its right (not connected ?)
| 4 || ? || Goes under package to squared testpad/sinkhole at its right (not connected ?)
|-
|-
| 5 || {{cellcolors|#ff0000}} VCAP || Capacitor to ground
| 5 || V ? || To a capacitor, and from there to ground
|-
|-
| 6 || ? || To squared testpad/sinkhole at its top (not connected ?)
| 6 || ? || To squared testpad/sinkhole at its top (not connected ?)
|-
|-
| 7 || {{cellcolors|#000000|#aaaaaa}} GND || Ground
| 7 || GND || Ground
|-
|-
| 8 || {{cellcolors|#ffcc22}} 3.3V_EVER_A || Output 3.3v standby rail 1
| 8 || 3.3V_EVER_A || 3.3v_standby_rail_1
|-
|-
|}
|}
{{clear}}
{{clear}}


==== Mitsumi 348A (HDMI) ====
==== Mitsumi 348A (voltage regulator) ====
<div style="float:right">[[File:Mitsumi 348A.jpg|200px|thumb|left|Mitsumi voltage regulator 348A<br />Seen on a JSD-001 motherboard]]</div>
<div style="float:right">[[File:Mitsumi 348A.jpg|200px|thumb|left|Mitsumi voltage regulator 348A<br />Seen on a JSD-001 motherboard]]</div>
*Part No: '''Mitsumi MM3348'''
*Datasheet: https://www.mitsumi.co.jp/latest/Catalog/pdf/regulate_mm_3348_e.pdf


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
Line 40: Line 38:
! Pin # !! Name !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || {{cellcolors|#ddd}} N/C || Not connected
| 1 || ? || Not connected ?
|-
|-
| 2 || {{cellcolors|#33cc33|#ffffff}} HDMI_EN || Connected to [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]] pin 119<br>Connected to [[HDMI]] [[Connectors#HDMI_Out|connector]] pin 18 (+5V output) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr>
| 2 || ? || Connected to syscon pin119@[[SW2-303]]
|-
|-
| 3 || {{cellcolors|#000000|#aaaaaa}} GND || Ground (this pin also dissipates heat to the circuit board ground layer)
| 3 || GND || Ground
|-
|-
| 4 || {{cellcolors|#ffcc22}} HDMI_VCC1 / +5V_ANA ? || Connected to [[HDMI]] controller [[MN8647091]] pin 100 (and a lot more pins). It have a testpad at the other board side
| 4 || ? || output voltage rail 1 ?. Connected to pin 100 (and other 10 pins more) of HDMI controller. It has a testpad at the other side
|-
|-
| 5 || {{cellcolors|#ffcc22}} HDMI_VCC2 / +3.3V_ANA ? || Connected to [[HDMI]] controller [[MN8647091]] pin 25 (and a lot more pins). It have a testpad at the other board side
| 5 || ? || output voltage rail 2 for A/V controller and optical ? (not tested). It has a testpad at the other side
|-
|-
| 6 || {{cellcolors|#000000|#aaaaaa}} GND || Ground (this pin also dissipates heat to the circuit board ground layer)
| 6 || GND || Ground
|-
|-
| 7 || {{cellcolors|#33cc33|#ffffff}} HDMI_EN || Connected to [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]] pin 119<br>Connected to [[HDMI]] [[Connectors#HDMI_Out|connector]] pin 18 (+5V output) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr>
| 7 || ? || Connected to syscon pin119@[[SW2-303]]
|-
|-
| 8 || {{cellcolors|#ff0000}} 5V_EVER || Connected to [[Power Supply]] control connector (CN101) pin 1
| 8 || 5V_EVER || From power supply 5v standby rail (pin 1 of connector CN101)
|-
|-
|}
|}
{{clear}}
{{clear}}


==== Mitsumi 810X (RSX RAM) ====
==== Mitsumi 040 810X (close to RSX) ====
<div style="float:right">[[File:Mitsumi 810x.jpg|200px|thumb|left|Mitsumi voltage regulator 810x]]</div>
*Part No: '''Mitsumi MM1810XFBE'''
*Datasheet: <abbr title="Missing In Action>M.I.A.</abbr>. Pinout similar than https://www.mitsumi.co.jp/latest/Catalog/pdf/regulate_mm_185x_e.pdf (page 4)


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
Line 68: Line 63:
! Pin # !! Name !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || {{cellcolors|#ffcc22}} RSX_VDDR || connected to a lot of pads of the [[RSX]], it has a testpad at the other board side
| 1 || ? || connected to 4x sinkholes (it has a testpad at the other side)
|-
|-
| 2 || {{cellcolors|#ddd}} N/C || Not connected
| 2 || ? || hidden under package
|-
|-
| 3 || {{cellcolors|#000000|#aaaaaa}} GND || Ground
| 3 || GND || Ground
|-
|-
| 4 || {{cellcolors|#ff0000}} NOISE_CAP || Noise decrease pin. 0.01μF capacitor to GND, and to a tiny squared testpad
| 4 || ? ||  
|-
|-
| 5 || {{cellcolors|#33cc33|#ffffff}} EN ?/Cont/Control || Connected to syscon pin75@[[SW2-303]]
| 5 || ? || Connected to syscon pin75@[[SW2-303]]
|-
|-
| 6 || {{cellcolors|#ddd}} N/C || Not connected
| 6 || ? || hidden under package
|-
|-
| 7 || {{cellcolors|#ddd}} N/C || Not connected
| 7 || ? || hidden under package
|-
|-
| 8 || {{cellcolors|#ff0000}} VIN || connected to 2x sinkholes
| 8 || ? || connected to 2x sinkholes
|-
|-
|}
|}
Line 94: Line 89:
! Pin # !! Name !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || {{cellcolors|#ffcc22}} OUT/NOR ? || capacitor and 180 ohm resistor to ground... then to 4 sinkholes and at the other side NOR VCC 3.3v (testpoint)
| 1 || V_OUT <!-- not official name --> || capacitor and 180 ohm resistor to ground... then to 4 sinkholes and at the other side NOR VCC 3.3v (testpoint)
|-
|-
| 2 || {{cellcolors|#000000|#aaaaaa}} GND ||  
| 2 || GROUND ||  
|-
|-
| 3 || {{cellcolors|#000000|#aaaaaa}} GND ||  
| 3 || GROUND ||  
|-
|-
| 4 || ? || Capacitor to ground
| 4 || ? || capacitor to ground
|-
|-
| 5 || {{cellcolors|#33cc33|#ffffff}} EN ? || Connected to pin50@[[SW2-303]]. And pin 3 @ Service Connector
| 5 || ? || Dissapears in a sinkhole and emerges near syscon, connected to pin50@[[SW2-303]]
|-
|-
| 6 || {{cellcolors|#000000|#aaaaaa}} GND ||  
| 6 || GROUND ||  
|-
|-
| 7 || {{cellcolors|#000000|#aaaaaa}} GND ||  
| 7 || GROUND ||  
|-
|-{{cellcolors|red}}
| 8 || {{cellcolors|#ff0000}} VCC ? || To fuse/thermistor [[Talk:Protection | TH7601]]
| 8 || V_IN_1 <!-- not official name --> || connected to BD9684 pins 3,8,17
|-
|-
|}
|}


==== BD9684 0906 ====
==== BD9684 0906 ====
<!-- BluRay ? -->


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
Line 122: Line 116:
|-
|-
| 2 || ? || dissapears under package
| 2 || ? || dissapears under package
|-{{cellcolors|red}}
| 3 || V_? <!-- not official name --> || <!-- connected to the common rail with the previous ones --> 0.400mf capacitor to ground... then to 4 sinkholes... at the other side conneced to fuse/thermistor TH7601
|-
|-
| 3 || {{cellcolors|#ff0000}} VCC ? || 0.400mf capacitor to ground, and to fuse/thermistor [[Talk:Protection | TH7601]]
| 4 || ? || to a sinkhole... at the other side 3.3K resistor to ground, then connected to pins 2 and 3 of a dual transistor (base of TR1, and collector of TR2)
|-
|-
| 4 || {{cellcolors|#33cc33|#ffffff}} EN ? || to a sinkhole... at the other side 3.3K resistor to ground, then connected to pins 2 and 3 of a dual transistor (base of TR1, and collector of TR2)<br>pin 5 of the dual transistor (base of TR2) is connected to a long trace that dies in a sinkhole and emerges under syscon, connected to pin42@[[SW2-303]]<br>the emitter pins of the dual transistor (1 and 4) are connected to a common ground
| 5 || GROUND ||
|-
|-
| 5 || {{cellcolors|#000000|#aaaaaa}} GND ||
| 6 || GROUND ||  
|-
| 6 || {{cellcolors|#000000|#aaaaaa}} GND ||  
|-
|-
| 7 || || dissapears under package
| 7 || || dissapears under package
|-
|-{{cellcolors|red}}
| 8 || {{cellcolors|#ff0000}} VCC ? || 0.400mf capacitor to ground, and to fuse/thermistor [[Talk:Protection | TH7601]]
| 8 || V_? <!-- not official name --> || 0.400mf capacitor to ground... then to the same 4 sinkholes of pin 3
|-
|-
| 9 || ? || dissapears under package
| 9 || ? || dissapears under package
Line 141: Line 135:
| 11 || ? || to 6 sinkholes... at the other side to unpopulated service connector... etc...
| 11 || ? || to 6 sinkholes... at the other side to unpopulated service connector... etc...
|-
|-
| 12 || rowspan="2" | ? || rowspan="2" | Capacitor to ground, to a 4x-sinkhole... then to BD controller
| 12 || ? || tied to pin 13... capacitor to ground, to a 4x-sinkhole... then to BD controller
|-
|-
| 13
| 13 || ? || tied to pin 12... capacitor to ground, to a 4x-sinkhole... then to BD controller
|-
|-
| 14 || {{cellcolors|#000000|#aaaaaa}} GND ||  
| 14 || GROUND ||  
|-
|-
| 15 || ? || to a sinkhole... at the other side to BD controller
| 15 || ? || to a sinkhole... at the other side to BD controller
|-
|-
| 16 || ? || dissapears under package
| 16 || ? || dissapears under package
|-
|-{{cellcolors|red}}
| 17 || {{cellcolors|#ff0000}} VCC ? || 0.400mf capacitor to ground, and to fuse/thermistor [[Talk:Protection | TH7601]]
| 17 || V_? <!-- not official name --> || 0.400mf capacitor to ground... then to a sinkhole and tied to pin 3
|-
|-
| 18 || ? || towards blu ray laser connector
| 18 || ? || towards blu ray laser connector
Line 161: Line 155:
|}
|}


====Rohm BD3525====
*pin 5 of the dual transistor (base of TR2) is connected to a long trace that dies in a sinkhole and emerges under syscon, connected to pin42@[[SW2-303]]
<!-- SouthBridge ? -->
*the emitter pins of the dual transistor (1 and 4) are connected to a common ground


{| class="wikitable"
====BD3525====
|+BD3525 pinout
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|- bgcolor="#cccccc"
! Pin # !! Name !! Description !! Connections
! Pin # !! Name !! Description !! Connections
|-
|-
| 1 || rowspan="5" {{cellcolors|#ffcc22}} OUT || rowspan="5" | Output voltage || rowspan="5" | To 4 sinkholes... at the other side to electrolitic capacitor 2.5v 330... and to ???
| 1 || rowspan="5" | OUT || rowspan="5" | Output voltage || rowspan="5" | To 4 sinkholes... at the other side to electrolitic capacitor 2.5v 330... and to ???
|-
|-
| 2
| 2
Line 178: Line 174:
| 5
| 5
|-
|-
| 6 || {{cellcolors|#ffcc22}} VOS || Output voltage control || Shorten with OUT pins
| 6 || VOS || Output voltage control || Shorten with OUT pins
|-
| 7 || {{cellcolors|#ffcc22|#ff0000}} FB || Reference voltage feedback || Diode to ground, and capacitor to ground, and diode to 55.8 ohm resistor to OUT pins
|-
| 8 || {{cellcolors|#11bbee}} NRCS || Non Rush Current on Start-up || Capacitor to ground
|-
| 9 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||
|-
| 10 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||
|-
|-
| 11 || {{cellcolors|#ff0000}} VCC || Power supply || To fuse/thermistor [[Talk:Protection | TH7601]]
| 7 || FB || Reference voltage feedback || Diode to ground, and capacitor to ground, and diode to 55.8 ohm resistor to OUT pins
|-
|-
| 12 || {{cellcolors|#33cc33|#ffffff}} EN || Enable input || 46Kohm resistor to ground, and a trace that dissapears in a sinkhole and emerges near syscon, connected to pin52@[[SW2-303]]
| 8 || NRCS || Non Rush Current on Start-up || Capacitor to ground
|-
|-
| 13 || {{cellcolors|#11bbee}} SCP || Short Circuit Protection delay  time  setting || Capacitor to ground
| 9 || GND || Ground ||  
|-
|-
| 14 || {{cellcolors|#ff8822}} VD || Input voltage detect || Shorten with IN pins
| 10 || GND || Ground ||
|-{{cellcolors|red}}
| 11 || VCC || Power supply || Connected to BD9684 pins 3,8,17... and to ???
|-
|-
| 15 || rowspan="6" {{cellcolors|#ff8822}} IN || rowspan="6" | Input voltage || rowspan="6" |  0.400mf capacitor to ground, to 4 sinkholes connected to BD3527 (near usb) pins 14 up to 20 and BD3527 (near flash) pins 14 up to 20... and to ???
| 12 || EN || Enable input || 46Kohm resistor to ground, and a trace that dissapears in a sinkhole and emerges near syscon, connected to pin52@[[SW2-303]]
|-
|-
| 13 || SCP || Short Circuit Protection delay  time  setting || Capacitor to ground
|-{{cellcolors|orange}}
| 14 || VD || Input voltage detect || Shorten with IN pins
|-{{cellcolors|orange}}
| 15 || rowspan="6" | IN || rowspan="6" |  Input voltage || rowspan="6" |  0.400mf capacitor to ground, to 4 sinkholes connected to BD3527 (near usb) pins 14 up to 20 and BD3527 (near flash) pins 14 up to 20... and to ???
|-{{cellcolors|orange}}
| 16
| 16
|-
|-{{cellcolors|orange}}
| 17
| 17
|-
|-{{cellcolors|orange}}
| 18
| 18
|-
|-{{cellcolors|orange}}
| 19
| 19
|-{{cellcolors|orange}}
| 20
|-
|-
| 20
|}
|}


====Rohm BD3527====
====BD3527====
There are 2 BD3527 on JSD-001 motherboard, one is located near flash and the other near usb connectors
There are 2 BD3527 on JSD-001 motherboard, one near flash and the other near usb connectors


<!-- for GDDR3 RAM chips ? (4x64MB)... and each BD3527 powers 2 RAM chips ?)-->
'''near flash'''
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| class="wikitable"
|- bgcolor="#cccccc"
|+BD3527 (near flash) pinout
! Pin # !! Name !! Description
! Pin # !! Name !! Description !! Connections
|-
|-
| 1 || rowspan="5" {{cellcolors|#ffcc22}} OUT ? || rowspan="5" | Output voltage ? || rowspan="5" | to 3 smd components to gnd, to electrolitic capacitor 2.5v 330, to 3 sinkholes with a testpoint at the other side
| 1 || rowspan="6" | V_OUT_x ? || rowspan="6" | to 3 smd components to gnd, to electrolitic capacitor 2.5v 330, to 3 sinkholes with a testpoint at the other side
|-
|-
| 2
| 2
Line 228: Line 224:
| 5
| 5
|-
|-
| 6 || {{cellcolors|#ffcc22}} VOS ? || Output voltage control ? || Shorten with OUT pins
| 6
|-
| 7 || {{cellcolors|#ffcc22|#ff0000}} FB ? || Reference voltage feedback ? || Capacitor and 1600 ohm resistor to OUT pins
|-
| 8 || {{cellcolors|#11bbee}} NRCS ? || Non Rush Current on Start-up ? || Capacitor? to ground
|-
| 9 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||
|-
| 10 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||
|-
|-
| 11 || {{cellcolors|#ff0000}} VCC ? || Power supply ? || To fuse/thermistor [[Talk:Protection | TH7601]]
| 7 || ? || capacitor and 1600 ohm resistor to pin 1
|-
|-
| 12 || {{cellcolors|#33cc33|#ffffff}} EN ? || Enable input ? || dissapears in a sinkhole (resistor 23Kohm to ground in the other side) and emerges near syscon, connected to pin95@[[SW2-303]]
| 8 || ? || diode ? to ground
|-
|-
| 13 || {{cellcolors|#11bbee}} SCP ? || Short Circuit Protection delay  time  setting ? || dissapears in a sinkhole (capacitor 915nf to ground in the other side)
| 9 || GROUND ||  
|-
|-
| 14 || {{cellcolors|#ff8822}} VD ? || Input voltage detect ? || Shorten with IN pins
| 10 || GROUND ||
|-{{cellcolors|red}}
| 11 || V_IN_1 <!-- not official name --> || connected to BD9684 pins 3,8,17
|-
|-
| 15 || rowspan="6" {{cellcolors|#ff8822}} IN ? || rowspan="6" |  Input voltage ? || rowspan="6" |  to 3 sinkholes missing at the other side, to 4 sinkholes connected to BD3525 pins 14 up to 20... and to ???
| 12 || ? || dissapears in a sinkhole (resistor 23Kohm to ground in the other side) and emerges near syscon, connected to pin95@[[SW2-303]]
|-
|-
| 13 || ? || dissapears in a sinkhole (capacitor 915nf to ground in the other side)
|-{{cellcolors|orange}}
| 14 || rowspan="7" | V_IN_2 <!-- not official name --> || rowspan="7" | to 3 sinkholes missing at the other side, to 4 sinkholes connected to BD3525 pins 14 up to 20
|-{{cellcolors|orange}}
| 15
|-{{cellcolors|orange}}
| 16
| 16
|-
|-{{cellcolors|orange}}
| 17
| 17
|-
|-{{cellcolors|orange}}
| 18
| 18
|-
|-{{cellcolors|orange}}
| 19
| 19
|-{{cellcolors|orange}}
| 20
|-
|-
| 20
|}
|}


{| class="wikitable"
'''near usb'''
|+BD3527 (near USB) pinout
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
! Pin # !! Name !! Description !! Connections
|- bgcolor="#cccccc"
! Pin # !! Name !! Description
|-
|-
| 1 || rowspan="5" {{cellcolors|#ffcc22}} OUT ? || rowspan="5" | Output voltage ? || rowspan="5" | 88 ohm resistor to ground, to a testpoint, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 ('''very close to a ram chip''')
| 1 || rowspan="6" | V_OUT_x ? || rowspan="6" | 88 ohm resistor to ground, to a testpoint, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 (very close to a ram chip)
|-
|-
| 2
| 2
Line 273: Line 271:
| 5
| 5
|-
|-
| 6 || {{cellcolors|#ffcc22}} VOS ? || Output voltage control ? || Shorten with OUT pins
| 6
|-
| 7 || {{cellcolors|#ffcc22|#ff0000}} FB ? || Reference voltage feedback ? || capacitor and 1600 ohm resistor to OUT pins
|-
| 8 || {{cellcolors|#11bbee}} NRCS ? || Non Rush Current on Start-up ? || Capacitor? to ground
|-
| 9 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||
|-
|-
| 10 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||  
| 7 || ? || capacitor and 1600 ohm resistor to pin 1
|-
|-
| 11 || {{cellcolors|#ff0000}} VCC ? || Power supply ? || To fuse/thermistor [[Talk:Protection | TH7601]]
| 8 || ? || diode ? to ground
|-
|-
| 12 || {{cellcolors|#33cc33|#ffffff}} EN ? || Enable input ? || 42k ohm resistor to ground, and to a sinkhole that dissapears in the other side and emerges near syscon, connected to pin92@[[SW2-303]]
| 9 || GROUND ||  
|-
|-
| 13 || {{cellcolors|#11bbee}} SCP ? || Short Circuit Protection delay  time  setting ? || 1000nf capacitor to ground
| 10 || GROUND ||
|-{{cellcolors|red}}
| 11 || V_IN_1 <!-- not official name --> || connected to BD9684 pins 3,8,17
|-
|-
| 14 || {{cellcolors|#ff8822}} VD ? || Input voltage detect ? || Shorten with IN pins
| 12 || ? || 42k ohm resistor to ground, and to a sinkhole that dissapears in the other side and emerges near syscon, connected to pin92@[[SW2-303]]
|-
| 15 || rowspan="6" {{cellcolors|#ff8822}} IN ? || rowspan="6" |  Input voltage ? || rowspan="6" |  capacitor to ground, to 4 sinkholes missing in the other side, connected to BD3525 pins 14 up to 20 ... and to ???
|-
|-
| 13 || ? || 1000nf capacitor to ground
|-{{cellcolors|orange}}
| 14 || rowspan="7" | V_IN_2 <!-- not official name --> || rowspan="7" | capacitor to ground, to 4 sinkholes missing in the other side, connected to BD3525 pins 14 up to 20
|-{{cellcolors|orange}}
| 15
|-{{cellcolors|orange}}
| 16
| 16
|-
|-{{cellcolors|orange}}
| 17
| 17
|-
|-{{cellcolors|orange}}
| 18
| 18
|-
|-{{cellcolors|orange}}
| 19
| 19
|-{{cellcolors|orange}}
| 20
|-
|-
| 20
|}
|}
== Others ==
*RSX VDDR control in DIA-001 ---> Rohm D35231 (1,2v)?, see [https://www.psx-place.com/threads/fault-finding-ylod-with-the-syscon-first-steps-and-error-reporting.30100/page-134#post-327399 1]
*RSX VDDR control in DIA-002 ---> Rohm D35230 (1,0v)?, see [https://www.psx-place.com/threads/fault-finding-ylod-with-the-syscon-first-steps-and-error-reporting.30100/page-134#post-327399 1]
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page: