Editing Talk:Dual Firmware

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
== Manual dualboot 3.55 & 3.70 with 2 flashdumps and 2 harddrives ==
=== Old Guide ===
[http://www.digitalangel.it/2011/08/tutorial-fast-swap-su-ps3-slim-cfw-3-55-3-70-con-2-hard-disk-e-progskeet/ original italian and english guide posted by digitalangel]
Today I will write a tutorial to “fast-swap” between CFW 3.55 and OFW 3.70, using 2 HDDs… at the end of the tutorial, you will be able to swap between the firmware just flashing a dump on your PS3 using Progskeet. (instead of downgrading and losing all data).
The first steps are not so easy, so take your time and go on, by the way, you must have some skill with Progskeet, and it must be 100% working on your console.
What we need:
* PS3 Slim running with FW 3.70
* 2 Hard Disks
* Progskeet installed and working on your PS3 Slim
* Downgrade.bin edited with your personal data (there are tons of tutorials for do this)
* 3.55 Downgrade Dongle to do the downgrade process.
* Sony OFW 3.70 UPDATE.([http://playstation-3.logic-sunrise.com/telechargement-331678-ofw-ps3-370.html DOWNLOAD])
* CFW 3.55 KMEAW “NO CHECK” by dospiedra.([http://www.multiupload.com/4S6NGO13H4 DOWNLOAD])
* Lv2Diag By Jaicrab. ([http://playstation-3.logic-sunrise.com/telechargement-225750-lv2diag-patche-par-jaicrab.html DOWNLOAD])
* Lv2Diag “FILE 2″ to go out of Service/Factory Mode. ([http://www.mediafire.com/?b07qrb96iz99ibb DOWNLOAD])
We need 2 harddrives because the firmware is partial on NOR (CoreOS) and the rest is on the harddrive. so we will need 2 HDDs, one for 3.55, and one for 3.70..
We will call those HDD “A” (for 3.70) and “B” (for 3.55) dont mix them up!
Starting with a PS3 Slim with OFW 3.70.
# Plug in HDD “B”, format and prepare it if it’s required by the PS3 and you should have your 3.70 up and running.
# DUMP your actual NOR and call it “original dump 3.70.bin”
# Now flash your “downgrade.bin” (edited with the personal data found in “original dump 3.70.bin”)
# Turn on your PS3 and be sure that the PS3 is asking you to press the PS button (downgrade.bin flashed correctly :D )
# Insert a 3.55 Downgrade dongle and enter factory/service mode.
# Copy Lv2Diag.self by Jaicrab and the 3.55 NO CHECK UPDATE renamed as “PS3UPDAT.PUP” in the root of your USB Stick.
# Plug in the USB Stick in the most-right USB port of your PS3 and wait for it to turn OFF.
# Leave the factory mode using the other Lv2Diag.self
# After the reboot, you need to configure and set up your system… now you have a fully working 3.55 CFW based on KMEAW “NO CHECK”.
# DUMP your actual NOR and call it “swap dump 3.55.bin”
# Unplug HDD B and Plug in HDD A.
# Turn on your PS3, plug in your USB Stick containing official 3.70 update and press start+select when asked.
# When the PS3 reboots, check that the system is fully working and DUMP your actual NOR and call it “swap dump 3.70.bin”.
NOW IT’S FINISHED! You should have “swap dump 3.55.bin” and “swap dump 3.70.bin” … Now you just have to swap HDD and flash the correspondening dump:
* HDD A = swap dump 3.70.bin
* HDD B = swap dump 3.55.bin
WARNING: Do not install other CFW than the “NO CHECK” one… because it’s used to make the “fast-swap” working… if you flash something different you will not be able to go between the 2 FWs. This patch disables the LV1 for checking the Syscon hashes at startup… so it will not freeze or complain when the syscon hashes says “3.70″ and your FW is 3.55 ;)
WARNING: In case you wanna update your console with a future “3.80″ or-so firmware. Do not update your console when you are running 3.55 firmware! You have to go to “swap dump 3.70.bin” and then update as usual (XMB or recovery)… -By the way, the downgrade is confirmed working only on 3.70… we haven’t tested it on other FWs, you could loose the possibility to go back to 3.55!-
<span style="color:red!important;">'''Editoral warning:''' The "NoCheck.pup" is known to cause trophy errors, use the [[Downgrading_with_NOR_flasher#Premade_CFW_Rogero_V2 | RogeroV2.pup]] instead or build one yourself with [[PS3MFW Builder]] and the [[Talk:Downgrading_with_NOR_flasher#Combined_TCL_V2 | TCL]] from the NOR downgrader talkpage.</span>
==Patches 3.41==
'''Once this patches are tested and confirmed to be safe, they will be commited to the MFW project'''
===Debug info patch tlc - patch_lv1debinfo===
'''Warning try these patches only if you have nor/nand flasher to recover'''
These patches allow the output of the debug printfs on startup, the main problem right now is that the buffer is only 0xFE0 bytes long so it gets overwritten. If anyone figures out how to solve this feel free to improve it
* http://pastie.org/private/a70bfqddpersnqf6sekuuw
* To see the debug console one should read 0xFEO bytes starting from these offsets
''''''Debug Console''''''
{|class="wikitable"
|-
!Type !! Address !! Console type
|-
|ra || 0x655040 ||fat
|-
|ra || 0x66EF00 || slim
|-
|}
'''Please inform your success or failure using these scripts'''
===Basic Hash checks patches - patch_lv1bscheck===
'''Warning try these patches only if you have nor/nand flasher to recover'''
* http://pastie.org/private/biyu5orq7h73yeaul5jhvw
'''Please inform your success or failure using these scripts'''
===Basic Hash checks patches for linux ENABLE/DISABLE/FORCE hash checks===
http://pastie.org/2070649
'''These have already been tested'''
==PreAlpha v3 smoketest - offsets==
'''patch_lv1sccheck''' (Modifying CORE_OS file lv1.self - Patching LV1 Checks)
{|class="wikitable"
|-
! a !! ss_server1.fself !! 2.80 !! 3.00 !! 3.01 !! 3.10 !! 3.15 !! 3.20 !! 3.21 !! 3.30 !! 3.40 !! 3.41-BAD !! 3.41-FIX !! 3.42 !! 3.50 !! 3.55
|-
| 1 || Patch core OS Hash check //product mode always on || 2958632 || 2958452 || 2958452 || 2958984 || 2958984 || 2959072 || 2891632 || 2891556 || 2891596 || 2891596 || 2891596 || 2891596 || 2891684 || 2891684
|-
| 2 || Patch check_revoke_list_hash check //product mode always on || 2961708 || 2961528 || 2961528 || 2962060 || 2962060 || 2962148 || 2894708 || 2894632 || 2894672 || 2894672 || 2894672 || 2894672 || 2894836 || 2894836
|-
| 3 || Patch get secure product mode on || 2954260 || 2954080 || 2954080 || 2954612 || 2954612 || 2954700 || 2887260 || 2887184 || 2887224 || 2887224 || 2887224 || 2887224 || 2887312 || 2887312
|-
| 4 || Patch Valid acces for TOOL - manufacturing || 2970228 || 2970048 || 2970048 || 2970568 || 2970568 || 2970656 || 2903216 || 2903140 || 2903180 || 2903180 || 2903180 || 2903180 || no pattern || no pattern
|-
| 5 || Patch Same version (OK) (TOOL/DEX/ARCADE or manufacturing) || no pattern || no pattern || no pattern || no pattern || no pattern || 3029516 || 2962076 || 2961372 || 2961412 || 2961412 || 2961412 || 2961412 || - || -
|-
|-
| 6 || Patch Older version CEX (OK) || - || - || - || - || - || 3029420 || 2961980 || 2961276 || 2961316 || 2961316 || 2961316 || 2961316 || - || -
| 6 || Patch Older version CEX (OK) || - || - || - || - || - || 3029420 || 2961980 || 2961276 || 2961316 || 2961316 || 2961316 || 2961316 || - || -
Line 173: Line 64:
==PreAlpha v5 smoketest - offsets==
==PreAlpha v5 smoketest - offsets==


'''patch_lv1debinfo''' (Modifying CORE_OS file lv1.self - Enables output of debug info)
'''patch_lv1debinfo''' (Modifying CORE_OS file lv1.self - Enables ou
 
{|class="wikitable"
|-
! a !! ss_server1.fself !! 2.80 !! 3.00 !! 3.01 !! 3.10 !! 3.15 !! 3.20 !! 3.21 !! 3.30 !! 3.40 !! 3.41-BAD !! 3.41-FIX !! 3.42 !! 3.50 !! 3.55
|-
| 1 || Patch UM debug level return value #8000b04 || 2953044 || 2952864 || 2952864 || 2953396 || 2953396 || 2953484 || 2886044 || 2885968 || 2886008 || 2886008 || 2886008 || 2886008 || 2886096 || 2886096
|-
| 2 || Patch COMMON debug level return value #80035b78|| No pattern || No pattern || No pattern || No pattern || No pattern || No pattern || No pattern || 3090884 || 3090924 || 3090924 || 3090924 || 3090924 || No pattern || No pattern
|-
| 3 || Patch SM debug level return value #8001f954 || - || - || - || - || - || - || - || 3000224 || 3000264 || 3000264 || 3000264 || 3000264 || - || -
|-
| 4 || Patch PRINTK enable return value #80035abc || - || - || - || - || - || - || - || 3090696 || 3090736 || 3090736 || 3090736 || 3090736 || - || -
|-
| 5 || Patch SB_MGR debug level return value #80030c2c || - || - || - || - || - || - || - || 3070584 || 3070624 || 3070624 || 3070624 || 3070624 || - || -
|-
| 6 || Patch DEBUG PRINTF function #80035cac || - || - || - || - || - || - || - || 3091192 || 3091232 || 3091232 || 3091232 || 3091232 || - || -
|-
| 7 || Patch PRINTF 1 function #80035bb3 || - || - || - || - || - || - || - || 3090944 || 3090984 || 3090984 || 3090984 || 3090984 || - || -
|-
| 8 || Patch COMMON PRINTF function #80035c2c || - || - || - || - || - || - || - || 3091064 || 3091104 || 3091104 || 3091104 || 3091104 || - || -
|-
|}
 
== E3 Fast Dual Boot- OFW 4.xx and CFW 4.xx ==
please do come crying in #ps3downgrade
 
 
Just base info, someone please work on, :) or delete....
 
'''Please Read'''
 
Thanks and credits
pu6pu6 - ps3hax.net, original brief tutorial
kman28 - ps3hax.net , original fast dual boot guide
everyone in this thread for testing and what not - http://www.ps3hax.net/showthread.php?t=44955
PSdevwiki-especially eussNL
 
What is needed:
1. If you brick or otherwise damage your PS3, no one but yourself is liable.
2. You will need an E3 flasher.
3. The tristate on the motherboard must be soldered to the SBE point on the e3 flasher with a cable
4. The track between points A and B must be scratched out and a cable soldered between points A and the SBCE point on the E3 flasher. [[Hardware_flashing#Pinout_Gallery | Diagrams]]
5. You must be in a position to install a 3.55 firmware.
 
'''CFW Setup'''
Plug in your CFW hard drive. Put switch 2 up on the E3, rest down.
Install Rogero 3.55 V7. Preferably via recovery menu. link
Install multiman 4.13 or later. Link
toggle qa-verify, link
Install 4.xx CFW via recovery mode links
Power on ps3 make sure 4.xx CFW is working
Put PS3 off
Change E3 switches as follows:
---SW:FLASHFUN/CFW/BACKUP/MICROSD/OBFLASH---
 
Click start this will backup the E3 onboard NOR to the microSD
 
Bytereverse the backup using Flowrebuilder
 
Apply ONE of the following no-check patches depending on your 4.xx CFW:
 
4.21 CFW - link
4.30 CFW - link
 
Link to patchfile
 
Open win skeet select patcher then select the patch file and input dump.
 
Once again byte reverse the dump so it can be used with E3 Flasher.
 
Put the patched and byte reversed dump on the sd card - rename to bkpe3.bin
 
Before turning ps3 on, set switch to:
 
---SW:FLASHFUN/CFW/PROG/MICROSD/OBFLASH---
 
Press start on e3 flasher
Power off ps3
 
Put only switch 2 up rest down, and turn on. If you receive an error just press the PS button on the controller. Make sure 4.xx CFW is working fine.
 
Turn ps3 off-unplug the power
 
'''OFW SETUP'''
 
PS3 is off
Take microSD out of E3
put in your OFW HDD
set switches to:
---SW:FLASHFUN/OFW/PROG/OBFLASH/PS3FLASH---
 
Turn PS3 on
Press start on E3
Once done turn off
 
Put all switches on e3 down
 
Boot, u will get an error. This is good. Follow prompts and install OFW 4.31
 
When you want to switch to OFW, put ps3 off-change switch to ofw, plug in OFW HDD, and turn on
 
When you want to switch to CFW put ps3 off-change switch to cfw, plug in CFW HDD, and turn on
 
 
== Software Talk ==
 
Software wise from GameOS it would be possible to switch OS Bank, booting into a different Lv0->Lv1->Lv2.<br>
 
Theory: <br>
To switch back it is required being the other Bank modified not being original firmware files for getting access to Lv2 Syscalls, specifically accessing EEPROM.<br>
Newer (patched) CoreOS theoretically '''could''' run older dev_flash version - to a certain degree.
 
=== EEPROM ===
{|class="wikitable"
|-
! Offset !! size !! Notes
|-
|0x48C24|| 1||Bank #0 OS-Flag (ros0 if 0xFF else ros1)
|-
|0x48C25|| 1||Bank #0 rvkprg-Flag
|-
|0x48C26|| 1||Bank #0 rvkpkg-Flag
|-
|0x48C27|| 1||Bank #1 OS-Flag
|-
|0x48C28|| 1||Bank #1 rvkprg-Flag
|-
|0x48C29|| 1||Bank #1 rvkpkg-Flag
|-
|}
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps3/Talk:Dual_Firmware"