Editing Talk:Boot modes

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
== YLOD remark ==
   <jestero> what do you mean with ylod?
   <jestero> what do you mean with ylod?
   <jestero> green, bip bip bip, yellow, red flashing ?
   <jestero> green, bip bip bip, yellow, red flashing ?
Line 7: Line 6:
   <jestero> so i disagree if you say that ylod it's a hardware stage problem
   <jestero> so i disagree if you say that ylod it's a hardware stage problem


  <mysis> i had ylod when booting into ps2 lpar, turned out to be dev_flash/file access error when replacing files there. pup reinstall solved it.


== Bluescreen without any information ==
example: http://www.youtube.com/watch?v=gv72yI8851s
===Problem description===
QA flagged 3.41 CECHC04 system (MinVerCheck says lowest applicable is 1.00), when downgrading to 1.02, 1.50, 1.51, 1.54, 1.60, 1.70  Retail/CEX in Recovery on 2.50 or higher, after installation the only output was a Blue filled screen (YPrPb/Component + Composite cable on multi-input TV).
Resetting videosettings by holding power until beep did not solve the issue.
'''Note:''' trying to use 2.43 Retail/CEX in Recovery on 2.50 or higher on the same downgrade QA flagged console results in abort of installation with reason: "The latest version of the system software is already installed. There is no need to update."
=== Solution ===
Used PSGrade JiG (PS3key) to trigger service mode (had noticed it still had USB activity) - after which system shutdown as expected, then lv2diag downgrader 3.50 and 2.50 PUP in root of USB for reinstall like a normal downgrade (expecting system would still be on 3.41 and failed the 1.02 before) and then the out of service mode lv2diag. Only after getting out of service mode the videooutput was restored and needed to do initial setup of userconfig again (also harddrive database needed to be restored and my old userdata was also reenabled).
== Redscreen without any information ==
===Problem description===
When experiencing above bluescreen, enabling factory service mode and trying to boot it normally to XMB will result in an empty full red screen.
=== Solution ===
See above reinstall of 2.50 (or higher) firmware in service mode.


== RSOD ==
== RSOD ==
Line 43: Line 24:
  <kado> you can compare with them, if you have RSOD come from ofw 3.55
  <kado> you can compare with them, if you have RSOD come from ofw 3.55
</pre>
</pre>
=== RSOD question from Rogero ===
==== How is it addressed? ====
  http://www.mediafire.com/?na6vdx9fkiac0v5 <--- RSOD
  http://www.mediafire.com/?gmd6rml9q9hgsr6 <--- 'fixed'
*Basic downgrader (with exception of trvk_prg0 0x040000 not/already patched):
**0x060000  trvk_prg1  (370.000 > 355.000)
**0x080000  trvk_pkg0  (370.000 > 355.000)
**0x0A0000  trvk_pkg1  (370.000 > 355.000)
**0x0C0000  ros0  (370.000 > 355.000)
**0x7C0000  ros1  (370.000 > 355.000)
- This downgrade patch was used because the original dump
*and 00'd entry in cvtrm:
::old  00EC4CCD  08 04 12
::new  00EC4CCD  00 04 12
=====Simplified table=====
{|class="wikitable sortable"
|-
! Target area !! Patchfile !! NOR Offset !! Paste length !! Remarks
|-
| ROS0 || [http://www.multiupload.com/RJVZP6CKZ5 patch1 (7 MB)] || 0x0C0010 || 0x6FFFE0 || version string 3.55
|-
| ROS1 || [http://www.multiupload.com/RJVZP6CKZ5 patch1 (7 MB)] || 0x7C0010 || 0x6FFFE0 || SAME as ros0
|-
| trvk_prg0 (0x40000) <br />trvk_prg1 (0x60000)<br />trvk_pkg0 (0x80000) <br />trvk_pkg1 (0xA0000) || [http://www.multiupload.com/MU7JRLE8R1 rvk-040000 (512 KB)] || 0x40000 || 0x80000 || one big patch<br />overlapping several revoke area's
|-
| CVTRM || [http://www.multiupload.com/Z1J1631VOR cvtrm-0xEC0000.bin (256 KB)] || 0xEC0000 || 0x40000 || magic: SCEI<br />Don't use this on another console,<br />it is here listed only for documentation purposes.<br />'''It will brick other consoles!'''
|-
|}
<!--//
==== What was the use of patch_rsod.tcl? ====
  http://www.pastie.org/private/cjkbenvexqjbyzlom7y4dw
  (documentation purpose only, DO NOT USE! BRICK/CORRUPTION RISK)
//-->
==== What's the strange patch? swindle explaination ====
It patches basic_plugins.sprx so that whenever corruption is detected, it will not show RSOD, never error out to alert the user of the problem and FIX the issue and thus only blindfolds the user while the system corrupt it further and further, until beyond repair (in short: '''they use it to swindle their customers''' by NOT fixing the issue and LIE to the customer that it is solved)
=== Abkarino ===
=== Abkarino ===
<pre>
  <Abkarino> he had teached me a lot of things
  <Abkarino> he had teached me a lot of things
  <Abkarino> like fixing RSOD consoles
  <Abkarino> like fixing RSOD consoles
Line 125: Line 66:
  <Abkarino> sorry eussNL i was out
  <Abkarino> sorry eussNL i was out
  <Abkarino> just come back
  <Abkarino> just come back
<Abkarino> i had fixed more than one console
<Abkarino> cVRTM had undocumented structure
<Abkarino> and if any of this value changed by anyway it give RSOD
<Abkarino> look at cVRTM file from NOR dump
<Abkarino> separet it to 2 files
<Abkarino> every one is 0x20000 file
<Abkarino> this patch must be doen for every console
<Abkarino> that is why no generic patch to solve this kind of problems
<Abkarino> you must do it for every console
<Abkarino> compare this 2 files
<Abkarino> there's a unique 20 byte value repeated at the end of every file
<Abkarino> in squince
<Abkarino> try to zeros one of themn and see what if you will get RSOD or not
<Abkarino> sorry talk to u morning
<Abkarino> have to go
[...] (long silence)
<n00b774> http://depositfiles.com/files/nti7olk5b
<Abkarino> http://www.mediafire.com/?86v681x9wl5o3qn
<eussNL> http://pastie.org/3149193 ^diff
NOTE: If you are crazy enough to want an RSOD, just 0x00 fill CVTRM. DO NOT DO THIS WITHOUT A FLASHER!!!
==Firmware Crashes==
This is a collection of crashes ordered from small to bigger (in order or importance), are separated by the behaviour the user see when the crash happens
All this "standard" crashes listed here are supposed to happen over a firmware that is running without problems, and the crash is not caused by a firmware modification
The firmware crashes when one of his threads/subprocess crashes, so when the firmware crash can be considerd a consequence of other crash (there is also the possibility of the thread to be "stuck" in a infinite bucle ... in this case the firmware doesnt crash, but is "stuck" in a black screen forever)
*The most common cause of a firmware crash is a problem in the thread that is running (app or game)
**Typicall in homebrew apps in beta stage, eboot game fixes, version spoofers, etc...
*The second common cause of a firmware crash is a "semi-corruption" of the [[XMB database]]
**Typicall when adding content manuallly in the hdd that needs to be managed by XMB (e.g: any content in XMB game category column)
Always try to avoid forcing one of this "turn-off" methods when the "HDD activity led" is blinking to avoid a problem with the filesystem. All this methods needs to be used in order, if the "eject crash" doesnt works try with the next one
===Eject===
Press the eject button 1 time. The "eject blue led" blinks, then the disc ejects, and you are "kicked out" to XMB
This only works when you have a real disc inserted in the BD drive
===PowerOFF #1===
Push 1 time "power off button". The red led of power button blinks for 1 or 2 minutes then the Ps3 turns off (can be long, wait calmly)
This can be considered a correct turn-off, in the next boot the firmware boots without problem
===PowerOFF #2===
Push "power off button" and keep it pressed. The red led doesnt blinks, after 1 or 2 minutes the PS3 turns-off suddenly (can be long, wait calmly)
This is not a correct turn-off, can generate corrupted files, and in the next boot the firmware can trigger one of the options in "recovery menu" automatically to repair the XMB database or the filesystem
===PowerOFF #3===
If nothing of the previous methods works... the last option is to disconnect the electricity power cord
This is the same case than the previous one, is not a correct turn-off
*Notes
Power-off button is connected to syscon. Is syscon who turns off the PS3, so this can be considered a "syscon crash" (in some way) because syscon is not responding correctly to the button
===Autocrash===
Nothing to do here, this happens automatically when booting a game or app, is the worst of all
===XMB database corruption===
This can be a consequence of some of the previous crashes, but also can be generated by adding manually content to the XMB (XMB database will try to make a copy of any file you make available to XMB, but this is not done in every boot to improve booting time... so there can be a mistmatch between what XMB database contains and what is displayed in XMB... also any corrupted or problematic files you use can be copyed to the database making the problem more annoying)
If the problematic file is not very important XMB can display a "corrupted icon" in his XMB position, but sometimes XMB doesnt know where is his position, this "corrupted icon" can be stuck forever, or the file is important enought to freeze XMB completly
To solve all the problems related with the "XMB database" or filesystem corruption, go to "recovery menu" and use the option "rebuild database"
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps3/Talk:Boot_modes"