Editing Service Connectors

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
= Service Connectors =
<div style="float:right">[[File:PS3 Service Connector 1st Generation COK-002.jpg|200px|thumb|left|PS3 [[Service Connectors|Service Connector]] 1st Generation [[COK-00x#COK-002|COK-002]]]]</div>
JTAG/UART/SPI/Diagnostic I/O used in Sony repair centers if a PS3 couldn't be fixed by software.
JTAG/UART/SPI/Diagnostic I/O used in Sony repair centers if a PS3 couldn't be fixed by software.


Line 5: Line 5:
* [[EBUS]] and [[Hardware_flashing#NOR_Interface_Testpoints|NOR Interface Testpoints]] are the ''storage'' related service points used with pinJIG/pogopin infactory
* [[EBUS]] and [[Hardware_flashing#NOR_Interface_Testpoints|NOR Interface Testpoints]] are the ''storage'' related service points used with pinJIG/pogopin infactory
* [[PCI]] also has some pads for [[South Bridge]] I/O service/diagnostics.
* [[PCI]] also has some pads for [[South Bridge]] I/O service/diagnostics.
= Service Connectors =


==Preproduction Generation==
==Preproduction Generation==
Line 90: Line 92:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line  || rowspan="1" | <b>-</b>
| style="background-color:black;color:white" | 1 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line  || rowspan="1" | <b>-</b>
|-
|-
| 2 || ?? || SC_RESET/RST || style="background-color:green;color:white" | Syscon || System Reset ||  rowspan="1" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 2 || ?? || SC_RESET/RST || style="background-color:red;color:white" | Syscon || System Reset ||  rowspan="1" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
|-
|-
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || -
| style="background-color:black;color:white" | 3 || {{NO}} || +3.3V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +3.3V line || -
|-
|-
| 4  || ?? || JRTCK || style="background-color:green;color:white" | Syscon || Return Test Clock ||  rowspan="6" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 4  || ?? || JRTCK || style="background-color:red;color:white" | Syscon || Return Test Clock ||  rowspan="6" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
|-
|-
| 5  || ?? || JTCK || style="background-color:green;color:white" | Syscon || Test Clock   
| 5  || ?? || JTCK || style="background-color:red;color:white" | Syscon || Test Clock   
|-
|-
| 6  || ?? || JTMS || style="background-color:green;color:white" | Syscon || Test Mode Select   
| 6  || ?? || JTMS || style="background-color:red;color:white" | Syscon || Test Mode Select   
|-
|-
| 7  || ?? || JTDO || style="background-color:green;color:white" | Syscon || Test Data Out   
| 7  || ?? || JTDO || style="background-color:red;color:white" | Syscon || Test Data Out   
|-
|-
| 8  || ?? || JTDI || style="background-color:green;color:white" | Syscon || Test Data In   
| 8  || ?? || JTDI || style="background-color:red;color:white" | Syscon || Test Data In   
|-
|-
| 9  || ?? || JNTRST || style="background-color:green;color:white" | Syscon || Test Reset   
| 9  || ?? || JNTRST || style="background-color:red;color:white" | Syscon || Test Reset   
|-
|-
| 10 || {{NO}} ||  +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || -
| style="background-color:black;color:white" | 10 || {{NO}} ||  +3.3V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +3.3V line || -
|-
|-
|}
|}
Line 119: Line 121:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| - || ?? || Backup Mode? || style="background-color:green;color:white" | Syscon || Backup Mode? || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
| - || ?? || Backup Mode? || style="background-color:red;color:white" | SysCon || Backup Mode? || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
|-
|-
| - || ?? || Diag Mode? || style="background-color:green;color:white" | Syscon || Diagnose Mode?  
| - || ?? || Diag Mode? || style="background-color:red;color:white" | SysCon || Diagnose Mode?  
|-
|-
|}
|}
Line 132: Line 134:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Standby Voltage !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Standby Voltage !! Group
|-
|-
| - || ?? || +3.3V_EVER? || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line? || 3.3 || <b>-</b>
| style="background-color:black;color:white" | - || ?? || +3.3V_EVER? || style="background-color:green;color:white" | DC-DC Regulator || +3.3V line? || 3.3 || <b>-</b>
|-
|-
| - || ?? || Rx? || style="background-color:green;color:white" | Syscon || Receive UART? || 0 || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
| - || ?? || Rx? || style="background-color:red;color:white" | Syscon || Receive UART? || 0 || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
|-
|-
| - || ?? || Tx? || style="background-color:green;color:white" | Syscon  || Transfer UART? || 3.14
| - || ?? || Tx? || style="background-color:red;color:white" | Syscon  || Transfer UART? || 3.14
|-
|-
| - || ?? || GND? || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line  || 0 || rowspan="1" | <b>-</b>
| style="background-color:black;color:white" | - || ?? || GND? || style="background-color:green;color:white" | DC-DC Regulator || Ground line  || 0 || rowspan="1" | <b>-</b>
|-
|-
|}
|}


=== Pictures (Traces from DECR) ===
=== Pictures (Traces from DECR) ===
* JTAG/BAK/DIA/UART TX/UART RX -> https://www.psdevwiki.com/ps3/File:7eGuCpc.jpg
* JTAG/BAK/DIA/UART TX/UART RX -> http://i.imgur.com/7eGuCpc.jpg


==1st Generation==
==1st Generation==
Line 164: Line 166:
<div style="float:right">[[File:PS3 PinJIG Connector 1st Generation COOKIE-13.jpg|100px|thumb|left|First Generation Connector as seen on [[COOKIE-13]]]]</div>
<div style="float:right">[[File:PS3 PinJIG Connector 1st Generation COOKIE-13.jpg|100px|thumb|left|First Generation Connector as seen on [[COOKIE-13]]]]</div>
<div style="float:right">[[File:PinJig Port to Testpoints COK-001.jpg|120px|thumb|left|Pogo-pins to Testpoints on [[COK-00x#COK-001|COK-001]]]]</div>
<div style="float:right">[[File:PinJig Port to Testpoints COK-001.jpg|120px|thumb|left|Pogo-pins to Testpoints on [[COK-00x#COK-001|COK-001]]]]</div>
<div style="float:right">[[File:PS3 Service Connector 1st Generation COK-002.jpg|200px|thumb|left|PS3 [[Service Connectors|Service Connector]] 1st Generation [[COK-00x#COK-002|COK-002]]]]</div>


{| class="wikitable"
{| class="wikitable"
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| 1 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line || <b>-</b>
|style="background-color:black;color:white" | 1 || {{NO}} || +5V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +5V line || <b>-</b>
|-
|-
| 2 || {{YES}} || TRST || style="background-color:green;color:white" | Syscon || Test Reset (nTRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 2 || {{YES}} || TRST || style="background-color:red;color:white" | Syscon || Test Reset (nTRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
|-
|-
| 3 || {{YES}} || TDI || style="background-color:green;color:white" | Syscon || Test Data In
| 3 || {{YES}} || TDI || style="background-color:red;color:white" | Syscon || Test Data In
|-
|-
| 4 || {{YES}} || RTCK || style="background-color:green;color:white" | Syscon || Return Test Clock
| 4 || {{YES}} || RTCK || style="background-color:red;color:white" | Syscon || Return Test Clock
|-
|-
| 5 || {{YES}} || TCK || style="background-color:green;color:white" | Syscon || Test Clock
| 5 || {{YES}} || TCK || style="background-color:red;color:white" | Syscon || Test Clock
|-
|-
| 6 || {{YES}} || TDO || style="background-color:green;color:white" | Syscon || Test Data Out
| 6 || {{YES}} || TDO || style="background-color:red;color:white" | Syscon || Test Data Out
|-
|-
| 7 || {{YES}} || TMS  || style="background-color:green;color:white" | Syscon || Test Mode Select
| 7 || {{YES}} || TMS  || style="background-color:red;color:white" | Syscon || Test Mode Select
|-
|-
| 8 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST)
| 8 || {{YES}} || SC_RESET || style="background-color:red;color:white" | Syscon || System Reset (nSRST)
|-
|-
| 9 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line ||<b>-</b>
|style="background-color:black;color:white" | 9 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line ||<b>-</b>
|-
|-
| 10 || {{YES}} || RxD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
| 10 || {{YES}} || RxD || style="background-color:red;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
|-
|-
| 11 || {{YES}} || TxD || style="background-color:green;color:white" | Syscon || Serial Transmit
| 11 || {{YES}} || TxD || style="background-color:red;color:white" | Syscon || Serial Transmit
|-
|-
| 12 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || <b>-</b>
|style="background-color:black;color:white" | 12 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line || <b>-</b>
|-
|-
| 13 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
| 13 || {{YES}} || Diag Mode || style="background-color:red;color:white" | Syscon || Diagnose Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
|-
|-
| 14 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode
| 14 || {{YES}} || Backup Mode || style="background-color:red;color:white" | Syscon || Backup Mode
|-
|-
| 15 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || <b>-</b>
| 15 || {{NO}} || +3.3V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +3.3V line || rowspan="2" | <b>-</b>
|- bgcolor="#dddddd"
|- bgcolor="#dddddd"
| 16 ||  {{YES}} || NC || <b>-</b> || <b>-</b> || <b>-</b>
| 16 ||  {{YES}} || NC || <b>-</b> || <b>-</b>
|-
|-
| 17 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || IR Remote Control (input) || <b>-</b>
| 17 || {{NO}} || RMC || style="background-color:red;color:white" | Syscon || Reset MechaCon or TestMode  <!-- disables Power & Eject buttons --> || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
|-
|-
| 18 || {{NO}} || SB_TxD || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
| 18 || {{NO}} || SB_TxD || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
Line 221: Line 222:
| 26 || {{NO}} || SB_CHKSTP_OUT || style="background-color:blue;color:white" | South Bridge || Checkstop Out
| 26 || {{NO}} || SB_CHKSTP_OUT || style="background-color:blue;color:white" | South Bridge || Checkstop Out
|-
|-
| 27 || {{NO}} || +1.2V_MC_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator <!-- (Cell-line) --> || +1.2V line || rowspan="4" | <b>-</b>
|style="background-color:black;color:white" | 27 || {{NO}} || +1.2V_MC_VDDIO || style="background-color:green;color:white" | DC-DC Regulator <!-- (Cell-line) --> || +1.2V line || rowspan="4" | <b>-</b>
|-
|-
| 28 || {{NO}} || +1.5V_RSX_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator <!-- (RSX-line) --> || +1.5V line
|style="background-color:black;color:white" | 28 || {{NO}} || +1.5V_RSX_VDDIO || style="background-color:green;color:white" | DC-DC Regulator <!-- (RSX-line) --> || +1.5V line
|-
|-
| 29 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
|style="background-color:black;color:white" | 29 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line
|-
|-
| 30 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line
|style="background-color:black;color:white" | 30 || {{NO}} || +5V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +5V line
|-
|-
|}
|}
It looks like [http://global.kyocera.com/prdct/electro/product/connector/fpcffc/05mm-pitch/6240.html Kayocera 6240]


=== CELL_BE JTAG Testpads===
=== CELL_BE JTAG Testpads===
<div style="float:right">[[File:CELL BE TESTPADS @COK001.JPG|200px|thumb|left|[[CELL BE]] JTAG Testpads as seen on [[COK-00x#COK-001|COK-001]] and [[COK-00x#COK-002|COK-002]]]]</div>
<div style="float:right">[[File:CELL BE TESTPADS @COK001.JPG|170px|thumb|left|[[CELL BE]] JTAG Testpads as seen on [[COK-00x#COK-001|COK-001]] and [[COK-00x#COK-002|COK-002]]]]</div>


{| class="wikitable"
{| class="wikitable"
Line 250: Line 249:
|-
|-
|}
|}
<br style="clear: both;" />


==2nd Generation==
==2nd Generation==
{| class="wikitable"
{| class="wikitable"
|-
! Used on !! Type of Connector
! Used on !! Type of Connector
<!-- ZIF Connector : 2x Kyocera 046239010001800+ -->
<!-- ZIF Connector : 2x Kyocera 046239010001800+ -->
Line 265: Line 262:
|- bgcolor="#eeeeee"
|- bgcolor="#eeeeee"
| [[DEB-001]] || Plain socket
| [[DEB-001]] || Plain socket
|-
|}
|}
 
<div style="float:right">[[File:PS3 PinJIG Connector 2nd Generation DIA-001.jpg|thumb|left|Second Generation Connector as seen on DIA-001]]</div>
===CN4003===
===CN4003===
<div style="float:right">[[File:PS3 PinJIG Connector 2nd Generation DIA-001.jpg|200px|thumb|left|Second Generation Connectors as seen on DIA-001<br>CN4003 at left, CN4004 at right]]</div>
{| class="wikitable"
{| class="wikitable"
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
| 10 || {{YES}} || SC_TXD || style="background-color:red;color:white" | SysCon || Serial Transmit || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
|-
|-
| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || rowspan="2" | <b>-</b>
| 9 || {{YES}} || SC_RXD || style="background-color:red;color:white" | SysCon || Serial Receive
|-
|-
| 2 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line
| 8 || {{NO}} || RMC || style="background-color:red;color:white" | SysCon || Reset MechaCon OR TestMode <!-- disables Power & Eject buttons --> || rowspan="3" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
|-
|-
| 3 || {{NO}} || SW_4_B || style="background-color:yellow" | USB || Power Switch || <b>[[USB]]</b>
| 7 || {{YES}} || Diag Mode || style="background-color:red;color:white" | SysCon || Diagnose Mode
|-
|-
| 4 || {{NO}} || SB_SIO0_TXD_M || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
| 6 || {{YES}} || Backup Mode || style="background-color:red;color:white" | SysCon || Backup Mode
|-
|-
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
|-
|-
| 6 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
| 4 || {{NO}} || SB_SIO0_TXD_M || style="background-color:blue;color:white" | South Bridge || Serial Transmit
|-
|-
| 7 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode
| 3 || {{NO}} || SW_4_B || style="background-color:yellow" | USB || Power Switch || <b>[[USB]]</b>
|-
|-
| 8 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || IR Remote Control (input) || <b>-</b>
| style="background-color:black;color:white" | 2 || {{NO}} || +5V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
|-
|-
| 9 || {{YES}} || SC_RXD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
| style="background-color:black;color:white" | 1 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line
|-
|-
| 10 || {{YES}} || SC_TXD || style="background-color:green;color:white" | Syscon || Serial Transmit
|}
|}


===CN4004===
===CN4004===
{| class="wikitable"
{| class="wikitable"
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
| 10 || {{YES}} || TRST || style="background-color:red;color:white" | SysCon || Test Reset (nTRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
|-
|-
| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || rowspan="3" | <b>-</b>
| 9 || {{YES}} || TDI || style="background-color:red;color:white" | SysCon || Test Data In
|-
|-
| 2 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
| 8 || {{YES}} || RTCK || style="background-color:red;color:white" | SysCon || Return Test Clock
|-
|-
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line
| 7 || {{YES}} || TCK || style="background-color:red;color:white" | SysCon || Test Clock
|-
|-
| 4 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 6 || {{YES}} || TDO || style="background-color:red;color:white" | SysCon || Test Data Out
|-
|-
| 5 || {{YES}} || TMS || style="background-color:green;color:white" | Syscon || Test Mode Select
| 5 || {{YES}} || TMS || style="background-color:red;color:white" | SysCon || Test Mode Select
|-
|-
| 6 || {{YES}} || TDO || style="background-color:green;color:white" | Syscon || Test Data Out
| 4 || {{YES}} || SC_RESET || style="background-color:red;color:white" | SysCon || System Reset (nSRST)
|-
|-
| 7 || {{YES}} || TCK || style="background-color:green;color:white" | Syscon || Test Clock
| style="background-color:black;color:white" | 3 || {{NO}} || +3.3V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +3.3V line || rowspan="3" | <b>-</b>
|-
|-
| 8 || {{YES}} || RTCK || style="background-color:green;color:white" | Syscon || Return Test Clock
| style="background-color:black;color:white" | 2 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line
|-
|-
| 9 || {{YES}} || TDI || style="background-color:green;color:white" | Syscon || Test Data In
| style="background-color:black;color:white" | 1 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line
|-
|-
| 10 || {{YES}} || TRST || style="background-color:green;color:white" | Syscon || Test Reset (nTRST)
|}
|}


<div style="float:right">[[File:CELL BE TESTPADS.jpg|thumb|left|Second Generation Connector as seen on SEM-001]]</div>
===CN1001 (CELL_BE_JTAG)===
===CN1001 (CELL_BE_JTAG)===
<div style="float:right">[[File:CELL BE TESTPADS.jpg|200px|thumb|left|Second Generation CN1001 Connector as seen on SEM-001]]</div>
{| class="wikitable"
{| class="wikitable"
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function
| style="background-color:black;color:white" | 12 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line
|-
|-
| 1 || {{NO}} || BE_TDI || style="background-color:magenta;color:white" | CELL BE || Test Data In
| style="background-color:black;color:white" | 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:green;color:white" | DC-DC Regulator || +1.2V Line
|-
|-
| 2 || {{NO}} || BE_TRST || style="background-color:magenta;color:white" | CELL BE || Test Reset (nTRST)
| style="background-color:black;color:white" | 10 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground line
|-
|-
| 3 || {{NO}} || BE_TCK || style="background-color:magenta;color:white" | CELL BE || Test Clock
| 9 || {{NO}} || BE_POWGOOD || style="background-color:magenta;color:white" | CELL BE || Power Good
|-
|-
| 4 || {{NO}} || BE_TMS || style="background-color:magenta;color:white" | CELL BE || Test Mode Select
| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset
|-
|-
| 5 || {{NO}} || BE_TDO || style="background-color:magenta;color:white" | CELL BE || Test Data Out
| 7 || {{NO}} || /BE_CHKSTP_OUT || style="background-color:magenta;color:white" | CELL BE || Cell Checkstop Out
|-
|-
| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Hard Reset<br>BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a <abbr title="R1024 in SEM-001">0 ohms resistor</abbr> located in between CELL border and his [[Thermal#Temperature_Monitors|temperature monitor]]
| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Reset?
|-
|-
| 7 || {{NO}} || /BE_CHKSTP_OUT || style="background-color:magenta;color:white" | CELL BE || Cell Checkstop Out
| 5 || {{NO}} || BE_TDO || style="background-color:magenta;color:white" | CELL BE || Test Data Out
|-
|-
| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset<br>BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a <abbr title="R1024 in SEM-001">0 ohms resistor</abbr> located in between CELL border and his [[Thermal#Temperature_Monitors|temperature monitor]]
| 4 || {{NO}} || BE_TMS || style="background-color:magenta;color:white" | CELL BE || Test Mode Select
|-
|-
| 9 || {{NO}} || BE_POWGOOD || style="background-color:magenta;color:white" | CELL BE || Power Good
| 3 || {{NO}} || BE_TCK || style="background-color:magenta;color:white" | CELL BE || Test Clock
|-
|-
| 10 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
| 2 || {{NO}} || BE_TRST || style="background-color:magenta;color:white" | CELL BE || Test Reset (nTRST)
|-
|-
| 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator || +1.2V Line
| 1 || {{NO}} || BE_TDI || style="background-color:magenta;color:white" | CELL BE || Test Data In
|-
|-
| 12 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
|}
|}


Line 387: Line 382:
| [[PQX-00x#PQX-001|PQX-001]] || Plain socket
| [[PQX-00x#PQX-001|PQX-001]] || Plain socket
|-
|-
| [[RTX-00x#RTX-001|RTX-001]] ? || Plain socket
|-
| [[REX-00x#REX-001|REX-001]] ? || Plain socket
|}
|}
<gallery>
File:PS3 Service Connector VER-001-small.jpg|Third Generation Service Connector as seen on VER-001
File:PS3 PinJIG Connector 3rd Generation DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
File:PS3 Service Connector DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
File:PS3 Service Connector JSD-001.jpg|Third Generation Service Connector as seen on JSD-001
File:PS3 Service Connector MPX-001 12GB.jpg|Third Generation Service Connector as seen on MPX-001
File:PS3 PinJIG Connector 3rd Generation SURTEES-03.jpg|Third Generation Service Connector as seen on SURTEES-03
</gallery>


===CN????===
===CN????===
This connector was introduced at the same time than the first [[Sherwood]] syscon (in [[VER-001]] motherboard with a [[SW-301]] syscon), and it seems to be used in all the next motherboards with syscons from the [[SW2-30x]] or [[SW3-30x]] series
<div style="float:right">[[File:Service connector 3rd gen VERTIGO.jpg|200px|thumb|left|PS3 Service Connector 3rd gen on [[VER-001|VERTIGO]]]]</div>
{| class="wikitable"
{| class="wikitable"
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
| 14 || {{NO}} || ? || ? || ? ||
|-
|-
| 1 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
| 13 || {{YES}} || TOOL1 || style="background-color:red;color:white" | SysCon || Clock output for tool  ||
|-
|-
| 2 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
| 12 || {{YES}} || P65/WR0 || style="background-color:red;color:white" | SysCon || ? ||
|-
|-
| 3 || {{NO}} || "P73" || style="background-color:green;color:white" | Syscon  || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>?<!--Connected to pin 5 of [[Talk:Regulators#D35653_0S25]]... so this pin is directly (or indirectly) related with flash power states-->
| 11 || {{YES}} || SC_RxD || style="background-color:red;color:white" | SysCon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
|-
|-
| 4 || {{NO}} || SB_SIO0_TXD_M || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" |<b>[[PCI#South_Bridge_serial|South Bridge UART]]</b> (throught 2 missing SMD components [[Media:PCI connector JSD-001 SB and SC UART.jpg|at the left of the PCI testpads 75 and 77]])
| 10 || {{YES}} || SC_TxD || style="background-color:red;color:white" | SysCon || Serial Transmit
|-
|-
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive
| 9 || {{NO}} || RESET <!-- low active --> || style="background-color:red;color:white" | SysCon || Reset ||
|-
|-
| 6 || {{NO}} || SB_PIO15? || style="background-color:blue;color:white" | South Bridge || ? || ?
| 8 || {{NO}} || FLMD0 || style="background-color:red;color:white" | SysCon || Flash programming mode ||
|-
|-
| 7 || {{NO}} || TOOL0 || style="background-color:green;color:white" | Syscon || Data input/output for tool  || rowspan="3" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b> (throught missing SMD components. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|lines 7,8,9 disconnected]])
| 7 || {{NO}} || TOOL0 || style="background-color:red;color:white" | SysCon || Data input/output for tool  ||
|-
|-
| 8 || {{NO}} || FLMD0 || style="background-color:green;color:white" | Syscon || Flash programming mode
| 6 || {{NO}} || ? || ? || ? ||
|-
|-
| 9 || {{NO}} || RESET <!-- low active --> || style="background-color:green;color:white" | Syscon || Reset
| 5 || {{NO}} || ? || ? || ? ||
|-
|-
| 10 || {{YES}} || SC_TxD || style="background-color:green;color:white" | Syscon || Serial Transmit || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b> (throught missing SMD components. See : [[Media:SC_Serv_Connector.JPG|lines 10,11 disconnected]])
| 4 || {{NO}} || ? || ? || ? ||
|-
|-
| 11 || {{YES}} || SC_RxD || style="background-color:green;color:white" | Syscon || Serial Receive
| 3 || {{NO}} || P73/EX19/KR3 || style="background-color:red;color:white" | SysCon  || ? ||
|-
|-
| 12 || {{YES}} || "P65" || style="background-color:green;color:white" | Syscon || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>? (throught missing SMD components. See: [[Media:SC_Serv_Connector.JPG|line 12 disconnected]])
| style="background-color:black;color:white" | 2 || {{NO}} || GND || style="background-color:green;color:white" | DC-DC Regulator || Ground Line || rowspan="2" | <b>-</b>
|-
|-
| 13 || {{YES}} || TOOL1 || style="background-color:green;color:white" | Syscon || Clock output for tool  || <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b> (throught missing SMD components. See: [[Media:SC_Serv_Connector.JPG|line 13 disconnected]])
| style="background-color:black;color:white" | 1 || {{NO}} || +5V_EVER || style="background-color:green;color:white" | DC-DC Regulator || +5V Line
|-
|-
| 14 || {{NO}} || SB_PIO14? || style="background-color:blue;color:white" | South Bridge || ? || ?
|}
|}


<gallery>
https://web.archive.org/web/20160309151818/http://pastie.org/private/h8osu80ksjr0xdta97zida <br>
File:PS3 Service Connector VER-001-small.jpg|Third Generation Service Connector as seen on VER-001
http://docs-asia.electrocomponents.com/webdocs/14a3/0900766b814a341b.pdf
File:PS3 PinJIG Connector 3rd Generation DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
File:PS3 Service Connector DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
File:PS3 PinJIG Connector 3rd Generation SURTEES-03.jpg|Third Generation Service Connector as seen on SURTEES-03
File:PS3 Service Connector JSD-001.jpg|Third Generation Service Connector as seen on JSD-001
File:PS3 Service Connector MPX-001 12GB.jpg|Third Generation Service Connector as seen on MPX-001
</gallery>


===CELL_BE_JTAG===
{{Wikify}}
<div style="float:right">[[File:CELL BE TESTPADS JSD-001.jpg|200px|thumb|left|[[CELL BE]] TESTPADS on [[JSD-001]]]]</div>
Same pinout than previous gen ?
<br style="clear: both;" />


===Bluray Drive Diagnostic Port===
<div style="float:right">[[File:Bluray Drive Diagnostic Port 28pin on JSD-001.jpg|200px|thumb|left|Unknown service connector on [[JSD-001]]]]</div>
For pinout see: [[Bluray_Drive#CN300_45pin|CN300]]
<br style="clear: both;" />
=Links=
https://web.archive.org/web/20160309151818/ http://pastie.org/private/h8osu80ksjr0xdta97zida <br>
https://pastebin.com/hp3Uz6F7 (mirror) <br>
http://docs-asia.electrocomponents.com/webdocs/14a3/0900766b814a341b.pdf


{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page:

Retrieved from "http://www.psdevwiki.com/ps3/Service_Connectors"