Editing Resizing VFLASH Storage Device

[[Category:OtherOS]]
= Introduction =

I tried first to remove GameOS HDD region, then created a smaller one and used the free space to create one new HDD region for Linux. But every time i did it, OFW removed it again at the next boot and reformatted the HDD. So i decided to use VFLASH because GameOS doesn't touch it.

VFLASH is a virtual device, as the name already suggests. VFLASH is the region #1 on the HDD of PS3. By default, VFLASH is only 256 MB. And it has one free region, region #7, which is currently not used by HV or GameOS.

HV hides VFLASH HDD region from LPAR 2 and it doesn't see it.

First, i resized the VFLASH. '''By doing this, you will lose your data on HDD but NOT on VFLASH !!!
VFLASH data remains untouched. Resizing VFLASH doesn't cause corruption of data already installed there !!!
So backup your GameOS data from UFS2 partition before you will do it.'''

After resizing VFLASH, GameOS will reformat the HDD again but with a little difference :-) It will have less HDD space now because i made VFLASH larger.

First step is to dump the partition table of HDD. Second step is to remove GameOS partitions.
Then resize VFLASH by modifying the partition table and writing it back to HDD.
The last step is creating new VFLASH region.

'''I did all these steps from a Linux with my kernel booted by BootOS but it's not necessary and can be easily done from GameOS itself'''. I implemented my dual boot on 3.41 PS3 from GameOS before SONY took it away.

I made VFLASH about 40GB large but you can make it even larger if you want to.

== Advantages Of Installing Linux on VFLASH ==

* VFLASH is HDD, so you won't loose any performance compared with HDD
* You won't loose your Linux if GameOS reformats your HDD
* By upgrading/downgrading PS3's firmware you won't loose your Linux region. The only problem is how to boot Linux  again :-)
* But now that SONY knows how we can install Linux on the HDD of a PS3 slim they could of course make it harder for us in the future firmwares.

= Dumping HDD Partition Table =

* Partition table is stored on first sectors of HDD
* Dump it with my '''ps3disk''' Linux kernel driver or with GameOS and HV call '''lv1_storage_read'''
* Partition table of a storage device contains all storage device regions with their start sector, sector count and ACL list

<pre>
# dd if=/dev/ps3da of=partition_table_old.bin bs=512 count=2
</pre>

== Example Of An Unmodified HDD Partition Table ==

<pre>
alex@gentoo ~ $ hexdump -C partition_table_old.bin 
00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000010  00 00 00 00 0f ac e0 ff  00 00 00 00 de ad fa ce  |................|
00000020  00 00 00 00 00 00 00 03  00 00 00 00 00 00 00 02  |................|
00000030  00 00 00 00 00 00 00 08  00 00 00 00 00 08 00 00  |................|
00000040  10 70 00 00 01 00 00 01  00 00 00 00 00 00 00 0b  |.p..............|
00000050  10 70 00 00 02 00 00 01  00 00 00 00 00 00 00 03  |.p..............|
00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000000c0  00 00 00 00 00 08 00 10  00 00 00 00 17 01 f1 a0  |................|
000000d0  10 70 00 00 01 00 00 01  00 00 00 00 00 00 00 03  |.p..............|
000000e0  10 70 00 00 02 00 00 01  00 00 00 00 00 00 00 03  |.p..............|
000000f0  10 20 00 00 03 00 00 01  00 00 00 00 00 00 00 03  |. ..............|
00000100  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000150  00 00 00 00 17 09 f1 b8  00 00 00 00 00 3f ff f8  |.............?..|
00000160  10 70 00 00 01 00 00 01  00 00 00 00 00 00 00 03  |.p..............|
00000170  10 70 00 00 02 00 00 01  00 00 00 00 00 00 00 03  |.p..............|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000400
</pre>

Here you can see a HDD partition table from the HDD of a PS3 slim. It has 3 regions: VFLASH and 2 GameOS regions.

The VFLASH region starts at sector '''0x8''' and is of size '''0x80000''' sectors. Each sector is 512 bytes.
So, VFLASH is 256 MB large.

You can also see the ACL list of every HDD region.
E.g. VFLASH can be accessed by LPAR auth id '''0x1070000001000001 (LPAR 1 or HV processes)''' and '''0x1070000002000001 (LPAR 2 or GameOS)'''. This list can be manipulated by HV calls 252 and 253 or with my ps3stor-utils and ps3stormgr Linux kernel module.

= Removing GameOS Partitions From HDD =

There are actually 2 methods i used to do these. First method is to modify the HDD partition table directly. The second method is to use my PS3 Linux kernel and '''ps3stormgr''' kernel module. Actually this step can be skipped.

== 1. Method ==

On Linux/Windows/Mac (from a PC), create a new partition table. No partitions need be created.

== 2. Method ==

* You will need my '''ps3stormgr''' Linux kernel module and '''ps3stor-utils'''
* In HV, HDD is the storage device with index 3
* On PS3 slim i used, GameOS creates 2 HDD regions #2 and #3 for itself (region #0 is the whole HDD and region #1 is VFLASH)
* '''Be careful with ps3stor_region tool because it won't ask you anything and just delete a storage region you specified'''
* '''If you deleted VFLASH accidentally then don't panic just reboot to GameOS and reinstall your firmware'''. Another option is to create VFLASH region again with '''ps2stor_region create'''
* Deleting a storage region with "ps3stor_region" doesn't delete data stored on HDD, it just tells HV to modify the storage device partition table, so if you deleted a storage region its data is still there and if you create it again as it was earlier then you won't losse anything :-) I tested it by myself !!!

<pre>
# ps3stor_region /dev/ps3stormgr delete 3 3
# ps3stor_region /dev/ps3stormgr delete 3 2 # removes UFS2 region
</pre>

= Patching HDD Partition Table =

== Example Of A Patched HDD Partition Table With Resized VFLASH Region ==

<pre>
alex@gentoo ~ $ hexdump -C part_table_patched.bin 
00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000010  00 00 00 00 0f ac e0 ff  00 00 00 00 de ad fa ce  |................|
00000020  00 00 00 00 00 00 00 03  00 00 00 00 00 00 00 02  |................|
00000030  00 00 00 00 00 00 00 08  00 00 00 00 04 08 00 00  |................|
00000040  10 70 00 00 01 00 00 01  00 00 00 00 00 00 00 0b  |.p..............|
00000050  10 70 00 00 02 00 00 01  00 00 00 00 00 00 00 03  |.p..............|
00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000400
</pre>

Here you can see an example of a patched HDD partition table with resized VFLASH region and removed GameOS regions.

I set sector count of VFLASH region to '''0x4080000''' sectors.

Of course you shouldn't use here sector count larger than your HDD allows :-)

== Writing Patched HDD Partition Table to HDD ==

<pre>
# dd if=part_table_patched.bin of=/dev/ps3da bs=512 count=2
# sync
</pre>

Now reboot to GameOS and it should start formatting your HDD again. But now it won't use the space we reserved for VFLASH :-)

= Adding New VFLASH Region =

* Now the last step is adding new VFLASH region where we can install our beloved Linux :-)
* '''VFLASH storage device has one unused region - region #7 - which we can use !!!'''
* To complete this step you will need my '''ps3stor-utils''' and my Linux kernel driver '''ps3stormgr'''
* Make sure you reboot after patching HDD partition table

<pre>
# ps3stor_region /dev/ps3stormgr create 4 0x80000 0x4000000 0x1070000002000001
</pre>

* The above command creates a new VFLASH region which starts at sector '''0x80000''' and has '''0x4000000''' sectors.
You can of course use another value for sector count. But it shouldn't be larger than the free space you added to VFLASH of course :-)
* The command should return '''0x7'''. It means the new region has index 7.
* Now reboot your Linux and if you are using my VFLASH Linux driver then you should see now a new VFLASH device '''/dev/ps3vflashh'''.
* Now you can partition it with '''fdisk''' e.g. and install Linux there :-) Have fun.
* If you have any problems then contact me and i will try to help you.



{{Linux}}<noinclude>[[Category:Main]]</noinclude>