Editing PlayStation archive (PSARC)

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
=Description=
=Description=
'''P'''lay'''S'''tation '''ARC'''hive is a generic file container that uses an internal hierarchy of subfolders with defined access paths, and optional zlib or lzma per-file compression
'''P'''lay'''S'''tation '''ARC'''hive is a container that allows subfolders and per-file compression using Zlib or lzma with 9 compression levels


 
*Notes:
The access paths are stored in a special file generated at build time called '''manifest''', It mimics a standard tree structure of folders/files but the root of the hierarchy is not defined, this way the contents of the psarc can be "mounted" by the system/game as part of his filesystem at any place and under any device letter/name
**lzma with compression level 9 has a compression ratio of around 50% of the size for general files
 
**some files doesnt admits much compression like .BIK videos (max compression ratio for .BIK doesnt reachs 1% or 2%). For this reason is better to dont use compression with videos because the size reduction is ridiculous
There are 3 different methods to generate this paths that defines how the .psarc contents are mounted by the system/game, this methods are enabled by the '''archive flags''' stored in the header, the system/game knows how to recreate the filesystem paths and mounts the .psarc contents by reading the '''archive flags''' that are needed to process the access paths in the '''manifest'''
 
 
 
The compression algorithms, the PS3 system, and the .psarc format, allows for 9 compression levels but in the practice only are used level 0 (no compression) or 9 (max compression used as the default compression level)
 
Compression level 9 for generic file types results as a compression ratio of around 50% of the original size, the final compression ratio can vary for different types of files, usually multimedia files (video, audio, etc) doesn't allow much compression because are already compressed originally (as example, max compression ratio for .BIK video and .MP3 audio doesn't reach 1% or 2%). For this reason is better not to compress multimedia files because the size reduction is ridiculous and read access times can be reduced (causing a delay/lag/freeze when trying to load the file)
 
Very small files (smaller than 100 bytes or so) as well as dummy files (0 bytes) doesn't admits compression because are so small that the compression algorithm is not able to reduce them, they will be stored without compression inside the .psarc archive even when is applied compression over them. When listing the contents of a .psarc with this kind of files will be displayed with a percentage of 100% and both his compressed and decompressed sizes the same value
 
<small>
{{Zlib Header}}
</small>


=Structure=
=Structure=
See: debian psarc Kplugin structure. From Manuel Stahl (thymythos) @ http://opendesktop.org/content/show.php/PSARC+file+header?content=162745
See {{Talk}} page
 
==Header==
==Header==
PSARC header example:
PSARC header example:


  '''Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F'''
  '''Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F'''
  00000000  <span style="background:#ff6666;">50 53 41 52</span> <span style="background:#66ff66;">00 01 00 04</span> <span style="background:#ffff66;">7A 6C 69 62</span> <span style="background:#6666ff;">00 01 23 BA</span>  <span style="background:#ff6666;">PSAR</span>....<span style="background:#ffff66;">zlib</span>..#º
  00000000  <span style="background:#ff6666;">50 53 41 52</span> <span style="background:#66ff66;">00 01 00 04</span> <span style="background:#ffff66;">7A 6C 69 62</span> <span style="background:#6666ff;">00 01 23 BA</span>  PSAR....zlib..#º
  00000010  <span style="background:#dd00dd;">00 00 00 1E</span> <span style="background:#dddd00;">00 00 09 16</span> <span style="background:#dddddd;">00 01 00 00</span> <span style="background:#d0000d;">00 00 00 02</span>  ................
  00000010  <span style="background:#dd00dd;">00 00 00 1E</span> <span style="background:#dddd00;">00 00 09 16</span> <span style="background:#dddddd;">00 01 00 00</span> <span style="background:#d0000d;">00 00 00 02</span>  ................


Line 33: Line 19:
! Offset !! Size !! Name !! Example !! Value (conversion) !! Notes
! Offset !! Size !! Name !! Example !! Value (conversion) !! Notes
|+PSARC Header
|+PSARC Header
| style="background-color:#ff6666;" | 0x00 || style="background-color:#ff6666;" | 0x04 || '''magic''' || 50 53 41 52 || PSAR || '''P'''lay'''S'''tation '''AR'''chive
| style="background-color:#ff6666;" | 0x00 || style="background-color:#ff6666;" | 0x04 || '''magic''' || 50 53 41 52 || PSAR || '''P'''lay'''S'''tation '''Ar'''chive
|-
|-
| style="background-color:#66ff66;" | 0x04 || style="background-color:#66ff66;" | 0x04 || '''version''' || 00 01 00 04 || v1.4 || First 2 bytes is the '''major version''', next 2 bytes is the '''minor version'''
| style="background-color:#66ff66;" | 0x04 || style="background-color:#66ff66;" | 0x04 || '''version''' || 00 01 00 04 || v1.4 || First 2 bytes is the main version, next 2 bytes is the subversion and are processed separatedlly, so 0001.0004 is "translated" to 1.4 by the system
|-
|-
| style="background-color:#ffff66;" | 0x08 || style="background-color:#ffff66;" | 0x04 || '''compression_type''' || 7A 6C 69 62 || zlib || '''zlib''' (default)<br>'''lzma'''
| style="background-color:#ffff66;" | 0x08 || style="background-color:#ffff66;" | 0x04 || '''compression type''' || 7A 6C 69 62 || zlib || zlib (default) or lzma
|-
|-
| style="background-color:#6666ff;" | 0x0C || style="background-color:#6666ff;" | 0x04 || '''toc_length''' || 00 01 23 BA || 0x123BA || Includes 32 byte header length + block length table following ToC
| style="background-color:#6666ff;" | 0x0C || style="background-color:#6666ff;" | 0x04 || '''table of content length''' || 00 01 23 BA || 0x123BA ||  
|-
|-
| style="background-color:#dd00dd;" | 0x10 || style="background-color:#dd00dd;" | 0x04 || '''toc_entry_size''' || 00 00 00 1E || 30 Bytes || Default is 30 bytes
| style="background-color:#dd00dd;" | 0x10 || style="background-color:#dd00dd;" | 0x04 || '''table of content entries size''' || 00 00 00 1E || 30 Bytes || Default is 30 bytes
|-
|-
| style="background-color:#dddd00;" | 0x14 || style="background-color:#dddd00;" | 0x04 || '''toc_entries''' || 00 00 09 16 || 1 manifest + 2325 files || The '''manifest''' is always included as the first file in the archive without an assigned ID
| style="background-color:#dddd00;" | 0x14 || style="background-color:#dddd00;" | 0x04 || '''number of entries''' || 00 00 09 16 || 1+2325 files || The filecount includes the "file path/names definitions" as an additionall file always placed at first position in the list and without an assigned ID
|-
|-
| style="background-color:#dddddd;" | 0x18 || style="background-color:#dddddd;" | 0x04 || '''block_size''' || 00 01 00 00 || 65536 Bytes || Default is 65536 bytes
| style="background-color:#dddddd;" | 0x18 || style="background-color:#dddddd;" | 0x04 || '''block size''' || 00 01 00 00 || 65536 Bytes || Default is 65536 Bytes
|-
|-
| style="background-color:#d0000d;" | 0x1C || style="background-color:#d0000d;" | 0x04 || '''archive_flags''' || 00 00 00 02 || Absolute paths || 0 = '''relative''' paths (default)<br>1 = '''ignorecase''' paths<br>2 = '''absolute''' paths
| style="background-color:#d0000d;" | 0x1C || style="background-color:#d0000d;" | 0x04 || '''archive flags''' || 00 00 00 02 || Absolute paths || Default is 0. See table below
|}
|}


*'''Relative''' (default, no flags)
PSARC Archive Flags are stored in the header as a big endian number, and defines the characteristics and structure of the archive when it was created
**Default value when the .psarc is created from command line or an .xml and no special access paths modes are specified
**The paths in the '''manifest''' doesn't have an slash character at the start of every line, the system accesses the files exactly like if the .psarc was a folder itself
**e.g: '''Folder/File.bin"'''
**In the games that uses .psarc's without flags (like ''uncharted'' series or ''the last of us'') is possible to replace the psarc by a folder with the same name of the psarc and his contents decompressed inside
 
*'''Ignorecase''' flag
**Enabled by using the option '''--ignorecase''' in command line or '''ignorecase="true"''' in the .xml
**The paths in the '''manifest''' are case insensitive (doesnt matters wich characters are in capitals)
 
*'''Absolute''' flag
**Enabled by using the option '''--absolute''' in command line or '''absolute="true"''' in the .xml
**The paths in the '''manifest''' have an slash character at the start of every line, <!-- the .psarc contents are mounted directly in the root of the application space (under USRDIR)... this is hidden because is a bit speculative, im not so sure but this is what it looks -->
**e.g: '''/Folder/File.bin"'''
 
==TOC Table==
 
PSARC TOC example:
 
'''Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F'''
00000020  <span style="background:#ff6666;">00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00</span>  ................
00000030  <span style="background:#66ff66;">00 00 00 00</span> <span style="background:#6666ff;">00 00 01 79 D9</span> <span style="background:#66ffff;">00 00 01 23 BA</span> A9 A6  .......yÙ...#º©¦
00000040  AB EE E6 73 40 2A E6 C3 37 24 3F C1 81 16 00 00  «îæs@*æÃ7$?Á....
00000050  00 02 00 00 00 1D 90 00 00 01 45 3B 5A 08 E7 AC  ..........E;Z.ç¬
...
 
{| class="wikitable"
{| class="wikitable"
|+PSARC Archive Flags
! Hexadecimal<br />(big endian) !! Decimal !! Binary<br />(flags) !! Flag Name !! Notes
|-
|-
! Offset !! Size !! Name !! Example !! Value (conversion) !! Notes
| {{cellcolors|black|lime}} 00 00 00 00 || style="text-align:right;" | 0 || 00000000 00000000 00000000 00000000 || '''relative archive paths''' (no slash character at the start of every line) || default value when using command line or xml
|+PSARC TOC
| style="background-color:#ff6666;" | 0x20 || style="background-color:#ff6666;" | 0x10 || '''name digest''' || 00 00 ... 00 00  || - || 128-bit md5 hash
|-
|-
| style="background-color:#66ff66;" | 0x30 || style="background-color:#66ff66;" | 0x04 || '''block offset''' || 00 00 00 00 || 0 || Offset in block list.
| {{cellcolors|black|lime}} 00 00 00 01 || style="text-align:right;" | 1 || 00000000 00000000 00000000 00000001 || '''ignorecase archive paths''' (all characters in capitals) || same than --ignorecase in command line and ignorecase="true" in the xml
|-
|-
| style="background-color:#6666ff;" | 0x34 || style="background-color:#6666ff;" | 0x05 || '''uncompressed size''' || 00 00 01 79 D9 || 96729 || Size of this entry once uncompressed.
| {{cellcolors|black|lime}} 00 00 00 02 || style="text-align:right;" | 2 || 00000000 00000000 00000000 00000010 || '''absolute archive paths''' (slash character added at the start of every line) || same than --absolute in command line and absolute="true" in xml
|-
| style="background-color:#66ffff;" | 0x39 || style="background-color:#66ffff;" | 0x05 || '''file offset''' ||00 00 01 23 BA || 74682 || Byte offset in psarc for this entry.
|}
|}


    <array name="TOC" length="num_entries">
==TOC Table==
      <struct name="entry">
        <array name="MD5" length="16"><primitive type="UInt8"/></array>
        <primitive name="zIndex" type="UInt32" />
        <bitfield name="length" width="40" type="unsigned" />
        <bitfield name="offset" width="40" type="unsigned" />
      </struct>
    </array>


==Blocks info table==
==Blocks info table==
    <array name="block sizes" length="num_entries">
      <bitfield name="size" width="16" type="unsigned" />
    </array>


==File table==
==File table==
The compression is applied "per-block", is possible to know the compression level by looking at the zlib header
The compression is applyed "per-block", is posible to know the compression level by looking at the zlib header
 
<small>
===Manifest===
{{Zlib Header}}
Manifest is the first file inside the psarc filetable, doesn't appears as a file when using the '''--list''' command and doesn't have an assigned '''ID'''
</small>
 
In windows all the paths uses the slash "\" but when the psarc is created the paths are stored inside the manifest as "/". When making a '''--list''' command over a psarc the slashes will appear as "/"
 
To make things more generic all examples in wiki uses full PC paths, this allows to place the sources (files to create, or psarc to extract), targets (files to create, or psarc to extract), and psarc.exe in any path of the PC, using full paths makes needed the use of the "strip" option in all creation process to remove part of the PC path and device letter from the access paths stored in the '''manifest'''


=PSARC Tools=
=PSARC Tools=
There are several versions of PSARC related tools, features has been implemented along the different versions and is hard to keep a record of them, please help filling the info in the page
There are several versions of PSARC related tools, features has been implemented along the different versions and is hard to keep a record of them, please help filling the info in the page


GUI versions are derived from the command line versions
GUI versions are derivated from the command line versions


==Open PSARC PS3 Extractor==
==Command line versions==
===Open PSARC PS3 Extractor===
By Matthieu Milan. It allows you to extract PSARC archive data in linux
By Matthieu Milan. It allows you to extract PSARC archive data in linux


Source code: https://www.ferb.fr/ps3/PSARC/
Source code: https://www.ferb.fr/ps3/PSARC/


==PSARC tool==
===PSARC tool===
Port of Matthieu Milan's open PSARC PS3 extractor to Windows. Tool written by Matthieu Milan (@usineur). Ported to VS2012 by AlexAltea.
Port of Matthieu Milan's open PSARC PS3 extractor to Windows. Tool written by Matthieu Milan (@usineur). Ported to VS2012 by AlexAltea.


Line 137: Line 82:
   -e START END      Extracts files with the file id specified by the range between START and END (inclusive).
   -e START END      Extracts files with the file id specified by the range between START and END (inclusive).


==PSARC Extractor==
===PSARC Extractor===
{{Missingfiles}}
By Insomniac @ xentax forums, download link: http://www.ps3hax.net/downloads.php?do=file&id=452 and http://www.modcontrol.com/Board/pc-tools/28869-psarc-ps3-extractor.html
By Insomniac @ xentax forums, download link: <s>http://www.ps3hax.net/downloads.php?do=file&id=452</s> and <s>http://www.modcontrol.com/Board/pc-tools/28869-psarc-ps3-extractor.html</s>


  '''Usage:'''
  '''Usage:'''
Line 164: Line 108:
  3      | 3,30 KB    | /my/files/dummies/dummy3.bin
  3      | 3,30 KB    | /my/files/dummies/dummy3.bin


==PSARC==
===PSARC===
{{Missingfiles}}
  1.60.008 SDK : x
  1.60.008 SDK : x
  1.92.001 SDK : x
  1.92.001 SDK : x
Line 175: Line 118:
  4.50.001 SDK : psarc-1310.001 (C++), built on Nov 16 2011 at 03:31:36
  4.50.001 SDK : psarc-1310.001 (C++), built on Nov 16 2011 at 03:31:36


*From xentax forums: http://forum.xentax.com/viewtopic.php?p=44228&sid=0a7b5167ba4599f71f85471119c918a6#p44228 Download link: <s>http://www.mediafire.com/?o3wy35uublreh</s>
*From xentax forums: http://forum.xentax.com/viewtopic.php?p=44228&sid=0a7b5167ba4599f71f85471119c918a6#p44228 Download link: http://www.mediafire.com/?o3wy35uublreh


===help===
====help====
{{Keyboard|content=<syntaxhighlight lang="bash">
{{Keyboard|content=
C:\>psarc.exe --help
'''C:\Portables\psarc>psarc.exe --help'''
usage:
'''usage:'''
  psarc verb [options] [file...]
  psarc verb [options] [file...]
  psarc --xml=XMLFILE
  psarc --xml=XMLFILE
   
   
verbs:
'''verbs:'''
  create                                  Create an archive. (default)
  create                                  Create an archive. (default)
  extract                                Extract contents of an existing archive.
  extract                                Extract contents of an existing archive.
Line 192: Line 135:
  dtd                                    Display a DTD describing psarc's XML input syntax.
  dtd                                    Display a DTD describing psarc's XML input syntax.


general options:
'''general options:'''
  -h, --help                              Show this help message and exit.
  -h, --help                              Show this help message and exit.
     --version                          Display version and exit.
     --version                          Display version and exit.
Line 201: Line 144:
  --xml=XMLFILE                          XML list of actions to perform.
  --xml=XMLFILE                          XML list of actions to perform.


create options:
'''create options:'''
  -oFILE, --output=FILE                  Archive filename to create.
  -oFILE, --output=FILE                  Archive filename to create.
  -IINPUTFILE, --inputfile=INPUTFILE      Inputfile listing files to archive. Consider --xml instead, which gives you more control.
  -IINPUTFILE, --inputfile=INPUTFILE      Inputfile listing files to archive. Consider --xml instead, which gives you more control.
Line 220: Line 163:
  --mergedups                            Compare the content of all files, and merge identical files so that only one copy of the data is included.
  --mergedups                            Compare the content of all files, and merge identical files so that only one copy of the data is included.


extract options:
'''extract options:'''
  --input=FILE                            Archive to extract files from. (default is first file argument)
  --input=FILE                            Archive to extract files from. (default is first file argument)
  --to=DIRECTORY                          Directory to write extracted files to. (default is current directory)
  --to=DIRECTORY                          Directory to write extracted files to. (default is current directory)
</syntaxhighlight>}}
}}
 
====verify====
{{Keyboard|content=
'''C:\Portables\psarc>psarc.exe verify c:\psarctests\custom_folders.psarc'''
Verifying c:\psarctests\custom_folders.psarc
Validating 1: Folder1/Image1.bmp (6220854 bytes)
Validating 2: Folder2/Folder21/Image21.png (6142 bytes)
Validating 3: Folder3/Folder31/Folder311/Image311.jpg (12524 bytes)
Archive OK
}}
{| class="wikitable"
|+verify output per-file
|| Validating <file ID/number>: || file path inside psarc archive || (file original size in bytes)
|}


===dtd===
====list====
* Display a DTD describing psarc's XML input syntax.
{{Keyboard|content=
'''C:\Portables\psarc>psarc.exe list c:\psarctests\custom_folders.psarc'''
Listing c:\psarctests\custom_folders.psarc
Folder1/Image1.bmp (6220854/6220854 100%)
Folder2/Folder21/Image21.png (157/6142 2%)
Folder3/Folder31/Folder311/Image311.jpg (209/12524 1%)
}}
{| class="wikitable"
|+list output per-file
|| file path inside psarc archive || (file compressed size || file original size || compression percentage)
|}
*Notes:
**In the compression percentage: 100% is no reduction, 0% is a huge reduction


====dump====
{{Keyboard|content=
'''C:\Portables\psarc>psarc.exe dump c:\psarctests\custom_folders.psarc'''
Dumping c:\psarctests\custom_folders.psarc
Folder1/Image1.bmp  os=6220854 cs=6220854 fb=2
Folder2/Folder21/Image21.png  os=6142 cs=157 fb=97
Folder3/Folder31/Folder311/Image311.jpg  os=12524 cs=209 fb=98
}}
{| class="wikitable"
|+dump output per-file
|| file path inside psarc archive || file original size || file compressed size || file block start offset ?
|}
====dtd====
The output of this command is a layout that defines the structure of an .xml document. See: http://www.w3schools.com/DTD/
The output of this command is a layout that defines the structure of an .xml document. See: http://www.w3schools.com/DTD/


{{Keyboard|content=<syntaxhighlight lang="DTD">
{{Keyboard|content=
C:\>psarc.exe dtd
'''C:\Portables\psarc>psarc.exe dtd'''<nowiki>
<!ELEMENT psarc (create|extract)+>
<!ELEMENT psarc (create|extract)+>


Line 284: Line 267:
                   skipmissingfiles (true|false) "false"
                   skipmissingfiles (true|false) "false"
                   overwrite (true|false) "false">
                   overwrite (true|false) "false">
</syntaxhighlight>}}
</nowiki>}}


*DTD Notes:
*DTD Notes:
Line 293: Line 276:
**Required attributes are defined with: '''#REQUIRED''', and optional attributes with: '''#IMPLIED'''
**Required attributes are defined with: '''#REQUIRED''', and optional attributes with: '''#IMPLIED'''


====Performing actions with an XML list====
Based in the DTD layout is posible to create an .xml layout that automatizes all the actions of the tool, this example is a generic layout containing all the elements and attributes availables together
Is posible to automatize the '''create''' and '''extract''' actions by using an .xml
 
Using an xml is the most flexible way to use psarc.exe because has full support for all features of the tool (command line doesnt), some of the options of the tool are only available when using an xml, specially per-file attributes like: per-file compression (used by lot of games), or per-file extraction


To use an .xml is needed to prepare it based in this layout
{{Boxcode|content=<syntaxhighlight lang="xml">
{{Boxcode|title=This is the xml representation of the DTD layout containing all the elements and attributes availables together, for wiki purposes only|code=<syntaxhighlight lang=xml>
<?xml version="1.0" encoding="UTF-8"?>
<psarc>
<psarc>
<create archive="" absolute="false" ignorecase="false" mergedups="false" stripall="false" blocksize="65536" jobs="" skipmissingfiles="false" format="psarc" overwrite="false">
<create archive="" absolute="false" ignorecase="false" mergedups="false" stripall="false" blocksize="65536" jobs="" skipmissingfiles="false" format="psarc" overwrite="false">
Line 313: Line 293:
</extract>
</extract>
</psarc>
</psarc>
</syntaxhighlight>}}
*The purpose of this XML is to use it as a base layout containing all, but is not possible to use it like that, is needed to delete the tags that are not needed for a specific case, the ones that are incompatibles with other tags, and is needed to add paths, etc...
*Some attributes appears as common in the DTD for "create" and "extract" but are not common, some of them has been deleted to avoid mistakes... but probably is needed to delete some more
When the xml is ready you can run it this way:
{{Keyboard|content=<syntaxhighlight lang="bash">C:\>psarc.exe --xml=C:\DTD_Layout.xml</syntaxhighlight>}}
The options '''--verbose''', '''--debug''', and '''--quiet''' cant be used inside the xml, so if needed are specifyed in the command line, this way:
{{Keyboard|content=<syntaxhighlight lang="bash">C:\>psarc.exe --debug --xml=C:\DTD_Layout.xml</syntaxhighlight>}}
===verify===
*Verify an existing archive's structural integrity and ensure that all files can be decompressed.
*Output info per-file is: Validating <file ID/number>: - file path inside psarc archive - (file original size in bytes)
{{Keyboard|content=<syntaxhighlight lang="bash">
C:\>psarc.exe verify "C:\psarctests\source files\test.psarc"
Verifying C:\psarctests\source files\test.psarc
Validating 1: dummy.txt (0 bytes)
Validating 2: BMPfolder1/Image1.bmp (6220854 bytes)
Validating 3: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Validating 4: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
Archive OK
</syntaxhighlight>}}
</syntaxhighlight>}}


===dump===
*XML Notes:
*Print detailed info about archive for unit testing.
**The purpose of this XML is to use it as a base layout containing all, but is not posible to use it like that, is needed to delete the tags that are not needed for a specific case, the ones that are incompatibles with other tags, and is needed to add paths, etc...
*Output info per-file is: file path inside psarc archive - file original size - file compressed size - file block start offset ?
**Some attributes appears as common in the DTD for "create" and "extract" but are not common, some of them has been deleted to avoid mistakes... but probably is needed to delete some more
**Is posible to generate this kind of .xml by using as the source the output of the "list" command after applying over it some character strings replacing using regular expressions with a tool like http://findandreplace.codeplex.com/#


{{Keyboard|content=<syntaxhighlight lang="bash">
====extract====
C:\>psarc.exe dump "C:\psarctests\source files\test.psarc"
The required options are '''--input''' (the source .psarc) and '''--to''' (the target folder where contents will be extracted). The example command extracts all files from the .psarc to a directory with full directory tree names, no skipped missing files, no overwrite
Dumping C:\psarctests\source files\test.psarc
dummy.txt  os=0 cs=0 fb=1
BMPfolder1/Image1.bmp  os=6220854 cs=8018 fb=2
JPGfolder1/JPGfolder2/Image2.jpg  os=12524 cs=209 fb=97
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png  os=6142 cs=6142 fb=98
</syntaxhighlight>}}


===list===
{{Keyboard|content=
*List contents of an existing archive.
'''C:\Portables\psarc>psarc.exe extract --input=c:\psarctests\custom_folders.psarc --to=c:\psarctests\custom_folders_extracted'''
*Output info per-file is: file path inside psarc archive - (file compressed size - file original size - compression percentage)
Extracting: Folder1/Image1.bmp (6220854 bytes)
*In the compression percentage: 100% is no reduction, 0% is a huge reduction
Extracting: Folder2/Folder21/Image21.png (6142 bytes)
 
Extracting: Folder3/Folder31/Folder311/Image311.jpg (12524 bytes)
{{Keyboard|content=<syntaxhighlight lang="bash">
C:\>psarc.exe list "C:\psarctests\source files\test.psarc"
Listing C:\psarctests\source files\test.psarc
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142/6142 100%)
</syntaxhighlight>}}
 
{{Boxframe2|content=
{{Boxtip1|content=Is posible to generate a text file containing the output of the '''list''' command by using the character '''>''' (right arrow) and the path/name of the destination file, this is usefull to convert the generated file to a '''filelist.txt''' for rebuilding the psarc archive later}}
{{Keyboard|content=<syntaxhighlight lang="bash">C:\>psarc.exe list "C:\psarctests\source files\test.psarc" > c:\psarctests\filelist.txt</syntaxhighlight>}}
}}
}}


----
===create===
* Create an archive.
====create by directory====
Creates a psarc using the contents of a specified folder and all subfolders. Is only available when using an .xml because command line doesn't allow to specify a source folder
Is the most rude method to create a psarc because all folders and files will be archived alphabetically based in his names (there is no control of the ID's that will be assigned to each file in the '''manifest'''). Cant be used to rebuild psarcs
Note in the next example the file dummy.txt (located in the root of the folder in windows, so considered first) has been archived after BMPfolder1
{{Boxcode|title=Create_by_directory.xml|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\by_directory.psarc" absolute="false" ignorecase="false">
<compression type="zlib" enabled="true" />
<strip regex="C:\psarctests\source files\test" />
<directory path="C:\psarctests\source files\test" />
</create>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=<syntaxhighlight lang="bash">
C:\>psarc.exe --xml="c:\psarctests\CREATE by_directory.xml"
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
Output: C:\psarctests\by_directory.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test
Compressing TOC
Compressing C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Compressing C:\psarctests\source files\test\dummy.txt
Compressing C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Compressing C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
          4: Total Files Archived
    6239520: Original Size
        108: Manifest (uncompressed)
          72: Manifest (compressed)
        380: TOC size
        8836: Final Size
        4.3%: Directory Overhead
      99.9%: Compression Ratio
          9: Compression Level
C:\>psarc.exe list C:\psarctests\by_directory.psarc
Listing C:\psarctests\by_directory.psarc
BMPfolder1/Image1.bmp (8018/6220854 0%)
dummy.txt (0/0 100%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (157/6142 2%)
</syntaxhighlight>}}
====create by filelist====
This method allows to order the files inside the archive in a specific position (so is posible to know the ID that will have every files before creating the psarc)
When rebuilding a psarc from a game is needed to preserve the original ID's of ALL the files inside the archive (is posible to replace files but never remove). By replacing files (e.g: by dummyes) all the others preserves his positions
The filelist is a plain .txt file where every file is defined by a single line, composed by his path, filename, and file extension, 1 line per file. Is posible to generate this kind of filelists automatically by using the output of the '''--list''' command and some regular expressions to replace characters
The examples used in wiki uses full PC paths to be more flexible (no need to place psarc.exe next to the source folder, actually you can place psarc.exe in c:\ the source folder in d:\ and create the psarc in x:\). When using full paths is mandatory to use the '''--strip''' option with an explicit path or a regular expression (regex) to remove part of the PC path (e.g: if you strip '''C:\psarctests\source files\test''' from '''C:\psarctests\source files\test\BMPfolder1\Image1.bmp''' the resulting path of the file inside the archive will be '''BMPfolder1/Image1.bmp''')
The '''--strip''' option removes part of the paths from the filelist, can be used several times with different stripped paths, this is usefull when the psarc archive is generated from a filelist that contains paths from different folders and/or devices in the PC (e.g: is posible to create a filelist including a file from '''F:\textures\packed\texture1.jpg''' and another file from '''G:\models\packed\model1.xxx''' and strip the paths: '''F:\textures\''' and '''G:\models\''', this way both files will be stored inside the psarc archive together under path: '''packed/texture1.jpg''' and '''packed/model1.xxx''')
First is needed to prepare a '''filelist.txt''' like this example, located in '''C:\psarctests\source files\filelist.txt''', contains the PC paths of the files that are in the folder '''C:\psarctests\source files\test''' and will be included inside the psarc archive:
C:\psarctests\source files\test\dummy.txt
C:\psarctests\source files\test\BMPfolder1\Image1.bmp
C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
The psarc archive is created by using the filelist as the '''--inputfile''' and uses an explicit path to '''--strip''' from every file inside the filelist, this way:
{{Keyboard|content=<syntaxhighlight lang="bash">C:\>psarc.exe create --strip="C:\psarctests\source files\test" --output=C:\psarctests\by_filelist.psarc --inputfile="C:\psarctests\source files\filelist.txt"</syntaxhighlight>}}
Or you can prepare an .xml that contains the path to the filelist.txt
{{Boxcode|title=Create_by_filelist.xml|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\by_filelist.psarc" absolute="false" ignorecase="false">
<compression type="zlib" enabled="true" />
<strip regex="C:\psarctests\source files\test" />
<filelist path="C:\psarctests\source files\filelist.txt" />
</create>
</psarc>
</syntaxhighlight>}}
Then run the contents of the .xml this way:
{{Keyboard|content=<syntaxhighlight lang="bash">C:\>psarc.exe --xml="c:\psarctests\CREATE by_filelist.xml"</syntaxhighlight>}}
The output of the tool is the same in both cases (except the InputFile not present when using an xml)
{{Keyboard|content=<syntaxhighlight lang="bash">
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
InputFile: C:\psarctests\source files\filelist.txt
Output: C:\psarctests\by_filelist.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test\dummy.txt
Archiving C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Archiving C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Archiving C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
Compressing TOC
Compressing C:\psarctests\source files\test\dummy.txt
Compressing C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Compressing C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Compressing C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
          4: Total Files Archived
    6239520: Original Size
        108: Manifest (uncompressed)
          72: Manifest (compressed)
        380: TOC size
        8836: Final Size
        4.3%: Directory Overhead
      99.9%: Compression Ratio
          9: Compression Level
C:\>psarc.exe list C:\psarctests\by_filelist.psarc
Listing C:\psarctests\by_filelist.psarc
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (157/6142 2%)
</syntaxhighlight>}}
====create by file====
This method is the real deal, only available by using an xml, superceedes all the other creation methods and is the only method where is posible to use per-file attributes
The xml includes a list of files where every path of every file in the PC is specifyed (paths are the same than the filelist.txt explained before) but every file line allows for attributes
Note in the next example the compression attribute is enabled and affects all files, except Image3.png that has been archived without compression (appears as 100% in the list command output)
The other per-file attribute avoids the tool to output an error in the case the file dummy.txt is missing in the source folder
{{Boxcode|title=Create_by_file.xml|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\by_file.psarc" absolute="false" ignorecase="false">
<compression type="zlib" enabled="true" />
<strip regex="C:\psarctests\source files\test" />
<file path="C:\psarctests\source files\test\dummy.txt" skipifmissing="true" />
<file path="C:\psarctests\source files\test\BMPfolder1\Image1.bmp" />
<file path="C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg" />
<file path="C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png" compressed="false" />
</create>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=<syntaxhighlight lang="bash">
C:\>psarc.exe --xml="c:\psarctests\CREATE by_file.xml"
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
Output: C:\psarctests\by_file.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test\dummy.txt
Archiving C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Archiving C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Archiving C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
Compressing TOC
Compressing C:\psarctests\source files\test\dummy.txt
Compressing C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Compressing C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
    Storing C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
          4: Total Files Archived
    6239520: Original Size
        108: Manifest (uncompressed)
          72: Manifest (compressed)
        380: TOC size
      14821: Final Size
        2.6%: Directory Overhead
      99.8%: Compression Ratio
          9: Compression Level
C:\>psarc.exe list C:\psarctests\by_file.psarc
Listing C:\psarctests\by_file.psarc
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142/6142 100%)
</syntaxhighlight>}}
Batch. This is an useless example to show how the .psarcs are created sequentially and how to create several .psarc's with only one .xml, it uses all default values for compressions, formats, flags etc...
In step 1 it creates an egg.psarc containing a dummy.txt. In step 2 it creates a chiken.psarc containing the egg.psarc made in step 1. In step 3 it creates an egg.psarc containing the chicken.psarc made in step 2 (egg.psarc created in step 3 overwrites egg.psarc made in step 1)
{{Boxcode|title=Create_by_file_paradox.xml|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\egg.psarc">
<strip regex="C:\psarctests\source files\test" />
<file path="C:\psarctests\source files\test\dummy.txt" />
</create>
<create archive="C:\psarctests\chicken.psarc">
<strip regex="C:\psarctests" />
<file path="C:\psarctests\egg.psarc" />
</create>
<create archive="C:\psarctests\egg.psarc" overwrite="true">
<strip regex="C:\psarctests" />
<file path="C:\psarctests\chicken.psarc" />
</create>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=<syntaxhighlight lang="bash">
C:\>psarc.exe --xml="c:\psarctests\CREATE by_file_paradox.xml"
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
Output: C:\psarctests\egg.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test\dummy.txt
Compressing TOC
Compressing C:\psarctests\source files\test\dummy.txt
          1: Total Files Archived
          0: Original Size
          9: Manifest (uncompressed)
          9: Manifest (compressed)
          96: TOC size
        105: Final Size
      91.4%: Directory Overhead
      -1.$%: Compression Ratio
          9: Compression Level
Strip: C:\psarctests
Flags: relative
NumJobs: 2
Output: C:\psarctests\chicken.psarc
Compression: zlib level 9
Archiving C:\psarctests\egg.psarc
Compressing TOC
Compressing C:\psarctests\egg.psarc
          1: Total Files Archived
        105: Original Size
          9: Manifest (uncompressed)
          9: Manifest (compressed)
          96: TOC size
        174: Final Size
      55.2%: Directory Overhead
      -65.7%: Compression Ratio
          9: Compression Level
Strip: C:\psarctests
Flags: relative
NumJobs: 2
Output: C:\psarctests\egg.psarc
Compression: zlib level 9
Archiving C:\psarctests\chicken.psarc
Compressing TOC
Compressing C:\psarctests\chicken.psarc
          1: Total Files Archived
        174: Original Size
          13: Manifest (uncompressed)
          26: Manifest (compressed)
          96: TOC size
        252: Final Size
      38.1%: Directory Overhead
      -44.8%: Compression Ratio
          9: Compression Level
C:\>psarc.exe list C:\psarctests\egg.psarc
Listing C:\psarctests\egg.psarc
chicken.psarc (143/174 82%)
C:\>psarc.exe list C:\psarctests\chicken.psarc
Listing C:\psarctests\chicken.psarc
egg.psarc (69/105 65%)
</syntaxhighlight>}}
----
===extract===
* Extract contents of an existing archive.
*There are 3 optional available attributes for extract:
*There are 3 optional available attributes for extract:
**'''--overwrite''' (if the files existed in the extraction folder they will be overwritten without advise)
**'''--overwrite''' (if the files existed in the extraction folder they will be overwritten without advise)
Line 643: Line 315:
**'''--skip-missing-files''' (seems pointless, mostly to extract files from malformed .psarcs or .psarcs that doesnt passes the "verify" command ?)
**'''--skip-missing-files''' (seems pointless, mostly to extract files from malformed .psarcs or .psarcs that doesnt passes the "verify" command ?)


The required options are '''--input''' (the source .psarc) and '''--to''' (the target folder where contents will be extracted)
When using this options the command line output is the same than in the example above, there is no mention of wich files are stripped, overwritten, or missing in the extraction process, usage example:
{{Keyboard|content=
'''C:\Portables\psarc>psarc.exe extract --overwrite --strip-all --skip-missing-files --input=c:\psarctests\custom_folders.psarc --to=c:\psarctests\custom_folders_extracted'''
Extracting: Folder1/Image1.bmp (6220854 bytes)
Extracting: Folder2/Folder21/Image21.png (6142 bytes)
Extracting: Folder3/Folder31/Folder311/Image311.jpg (12524 bytes)
}}
 
====create====


====extract all====
====xml====
The example command extracts all files from the .psarc to a directory with full directory tree names, no skipped missing files, no overwrite
To use an .xml is needed to prepare it before using psarc.exe, using an xml is the most flexible way to use psarc.exe because allows to place the source (files to create, or psarc to extract), target (files to create, or psarc to extract), and psarc.exe in any path of the PC, it allows the usage of a filelist.txt (that defines all files inside the archive), create psarcs based in a directory, or specify all the files inside the xml, also to specify the compression level for every file (needed for video or audio files that doesnt admits compression), etc...


When using this options the command line output is the same, there is no mention of wich files are stripped, overwritten, or missing in the extraction process
Is also the most complicated method because is needed to specify full PC paths inside the xml, and when creating is needed to specify regular expressions to strip part of the PC path


{{Keyboard|content=<syntaxhighlight lang="bash">
When the xml is ready you can run it this way:
C:\>psarc.exe extract --input="C:\psarctests\source files\test.psarc" --to="C:\psarctests\test"
{{Keyboard|content=
Extracting: dummy.txt (0 bytes)
'''C:\Portables\psarc>psarc.exe --xml=c:\psarctests\extract_custom_folders.xml'''
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
}}
Extracting: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Extracting: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
C:\>psarc.exe extract --overwrite --strip-all --skip-missing-files --input="C:\psarctests\source files\test.psarc" --to="C:\psarctests\test"
Extracting: dummy.txt (0 bytes)
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
Extracting: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Extracting: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
</syntaxhighlight>}}


'''extract all (xml)'''
The options '''--verbose''', '''--debug''', and '''--quiet''' cant be used inside the xml, so if needed are specifyed in the command line, this way:
{{Keyboard|content=
'''C:\Portables\psarc>psarc.exe --debug --xml=c:\psarctests\create_custom_folders.xml'''
}}


{{Boxcode|title=Extract_all.xml|code=<syntaxhighlight lang="xml">
=====xml extract=====
Extracting all files
{{Boxcode|content=<syntaxhighlight lang="xml">
<?xml version="1.0" encoding="UTF-8"?>
<psarc>
<psarc>
<extract archive="C:\psarctests\source files\test.psarc" to="C:\psarctests\all">
<extract archive="c:\psarctests\custom_folders.psarc" to="c:\psarctests\custom_folders_extracted">
</extract>
</extract>
</psarc>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=<syntaxhighlight lang="bash">
C:\>psarc.exe --xml="c:\psarctests\EXTRACT all.xml"
Extracting: dummy.txt (0 bytes)
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
Extracting: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Extracting: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
</syntaxhighlight>}}
</syntaxhighlight>}}


====extract by file====
Extracting a single file
This extraction method is only available when using an xml because command line doesnt allows to specify files inside the archive
{{Boxcode|content=<syntaxhighlight lang="xml">
 
<?xml version="1.0" encoding="UTF-8"?>
{{Boxcode|title=Extract_by_file.xml|code=<syntaxhighlight lang="xml">
<psarc>
<psarc>
<extract archive="C:\psarctests\source files\test.psarc" to="C:\psarctests\by_file">
<extract archive="c:\psarctests\custom_folders.psarc" to="c:\psarctests\custom_folders_extracted">
<file archivepath="BMPfolder1/Image1.bmp" />
<file archivepath="Folder1/Image1.bmp" />
</extract>
</extract>
</psarc>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=<syntaxhighlight lang="bash">
C:\>psarc.exe --xml="c:\psarctests\EXTRACT by_file.xml"
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
</syntaxhighlight>}}
</syntaxhighlight>}}


When extracting single files is also posible to use the same attributes availables in command line, and attributes per-file, but they uses different names inside the xml (see the DTD example)
When extracting single files is also posible to use the same attributes availables in command line, and attributes per-file, but they uses different names inside the xml (see the DTD example)
{{Boxcode|title=Extract_by_file.xml|code=<syntaxhighlight lang="xml">
{{Boxcode|content=<syntaxhighlight lang="xml">
<?xml version="1.0" encoding="UTF-8"?>
<psarc>
<psarc>
<extract archive="C:\psarctests\source files\test.psarc" to="C:\psarctests\by_file" stripall="true" skipmissingfiles="false" overwrite="true">
<extract archive="c:\psarctests\custom_folders.psarc" to="c:\psarctests\custom_folders_extracted" stripall="true" skipmissingfiles="false" overwrite="true">
<file archivepath="dummy.txt" skipifmissing="true" />
<file archivepath="Folder1/Image1.bmp" skipifmissing="true" />
<file archivepath="PNGfolder1/PNGfolder2/PNGfolder3/Image3.png" />
<file archivepath="Folder3/Folder31/Folder311/Image311.jpg" />
</extract>
</extract>
</psarc>
</psarc>
</syntaxhighlight>}}
</syntaxhighlight>}}
*Notes about the xml examples above:
**The element "extract" uses the attribute '''archive''' but could be replaced by '''input''', in this case are exactly the same and both will work, actually '''--input''' is the same option used in comand line but the examples in wiki uses the name '''archive''' because is more intuitive (is also used as an attribute for "create" and in both cases is refered to the compressed archive.psarc). Both (archive and input) appears in the DTD as optional (#IMPLIED) but only one of them can be used in the xml
**The element "file" uses the attribute '''archivepath''' but could be replaced by '''path''', in this case are exactly the same and both will work, but the examples in wiki uses the name '''archivepath''' because is more intuitive (is refered to the path of a file inside archive.psarc). Both (archivepath and path) appears in the DTD as optional (#IMPLIED) but only one of them can be used in the xml
===Other options===
====Regular expression support (regex)====
-sREGEX, --strip=REGEX                  Perl-compatible regex specifying a prefix to strip from the pathnames stored in the archive. This may be specified more than once. (default = current dir)
Psarc uses regular expressions compatibles with PERL 5, specifically the ones used by the PCRE library http://www.pcre.org/ As can be seen in the PS3 firmware third party software licenses in XMB/Settings/System Settings/About PlayStation®3 (PS3™)
====Compression levels====
--level=N                              Compression quality. 1 is fastest, 9 is best. (default = 9)


*Notes
*Notes
**(default = 9)
**In the xml examples above, the "extract" attribute '''archive''' could be replaced by '''input''', in this case are exactly the same and both will work, actually '''--input''' is the same option used in comand line but the examples in wiki uses the name '''archive''' because is more intuitive (is also used as an attribute for "create" and in both cases is refered to the compressed archive.psarc). Both (archive and input) appears in the DTD as optional (#IMPLIED) but only one of them can be used in the xml
**when --level is not defined at creation time, the info about compression level in the creation process window appears with a value of 9, even when using --nocompress
 
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\by_file.psarc">
<compression type="zlib" level="9" />
...
</syntaxhighlight>}}
 
====Create mself====
-m, --mself                            Create a PSARC-MSELF hybrid file for PS3, which can contain encrypted special files like SDATA, SPRX, and SPU SELF.
 
For rebuilding purposes is needed to verify if some of this files are present in the original filelist, by searching for this file extensions (.sdata .sprx and .self), though file extensions could not be accurate because game developers can use custom names for file extensions


*As far i remember this option doesnt stores any data in the psarc header so it seems the only way to identify his presence is by looking at the files itself--[[User:Sandungas|Sandungas]] ([[User talk:Sandungas|talk]]) 18:34, 20 March 2017 (UTC)
=====xml create=====


==Total Commander plugin==
==Total Commander plugin==
http://www.totalcmd.net/plugring/PSARC.html
http://www.totalcmd.net/plugring/PSARC.html


==PS3 PSARC GUI==
==GUI versions==
===PS3 PSARC GUI===
It's a graphical user interface to view, extract or create psarc archives. GUI written by aldo, unknown psarc tool used internally
It's a graphical user interface to view, extract or create psarc archives. GUI written by aldo, unknown psarc tool used internally


Download link: http://aldostools.org/ps3_psarc_gui.rar
Download link: http://aldostools.org/ps3_psarc_gui.rar
=PSARC Related Tools=
*All the files and xml's from the examples to practise and to use as layouts http://www.multiup.org/en/mirror/c5b18ca6d3b0c4a24ea3c753d6df7a76/psarctests.zip
*http://findandreplace.codeplex.com/
*http://fart-it.sourceforge.net/
*http://textmechanic.com/Remove-Duplicate-Lines.html
=Rebuilding PSARC files=
When rebuilding a psarc is needed to preserve the original positions of all the files inside the archive (because every file in the original psarc has assigned an '''ID''' number, and after rebuilding this numbers must match with the original positions). for this same reason when rebuilding is not a good idea to remove files (because the other files that comes after will be displaced). When the purpose of the rebuild is to  reduce the size (by removing languages, etc...) the method consists in replacing them by dummies (0kb files), this dummies preserves the positions of all the files
This need to preserve the original positions of all the files inside the archive in the practise means there are only 2 methods to rebuild a psarc: "by filelist" or "by file". For both is needed to create a list of files
{{Boxframe3|content='''Rebuilding PSARC files, step-by-step summary'''
* Step 1 - Identify compression method, archive flags, and verify default structure sizes
* Step 2 - Identify if per-file compression was used <!-- and dupes --->
* Step 3 - Rebuild
** Step 3a - If per-file compression was not used, rebuild with the method "by filelist" or "by file"
** Step 3a - If per-file compression was used, rebuild with the method "by file"
* Step 4 - Verify
}}
'''Step 1'''
Is needed to look at the psarc header to identify some settings
'''Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F'''
00000000  50 53 41 52 00 01 00 04 <span style="background:#ffff66;">7A 6C 69 62</span> 00 01 23 BA  PSAR....<span style="background:#ffff66;">zlib</span>..#º
00000010  <span style="background:#dd00dd;">00 00 00 1E</span> 00 00 09 16 <span style="background:#dddddd;">00 01 00 00</span> <span style="background:#d0000d;">00 00 00 03</span>  ................
Most important ones are the '''<span style="background:#ffff66;">compression method</span>''' (zlib/lzma) and the '''<span style="background:#d0000d;">archive flags</span>''' (relative/absolute, and ignorecase), this settings will be used when rebuilding from command line or from xml this way:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\by_file.psarc" absolute="true" ignorecase="true">
<compression type="zlib" />
...
</syntaxhighlight>}}
The other values in the header that needs to be verifyed are the '''<span style="background:#dd00dd;">TOC entry size</span>''' and the '''<span style="background:#dddddd;">Block size</span>''', is needed to know if the original psarc we are trying to rebuild uses the default values (all i found used defaults), otherway is posible to use non-default values this way: <!-- not sure if is posible to change the "TOC entry size" -->
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\by_file.psarc" absolute="true" ignorecase="true" blocksize="65536">
<compression type="zlib" />
...
</syntaxhighlight>}}
'''Step2'''
Now is needed to know if the psarc uses per-file compression (if some of the files inside the archive are compressed, and others are not compressed)
This is important to know wich rebuild method will be used in the next step, is needed to make a --list command with psarc tool and store the output of the command as a .txt
Open the .txt in a text editor (like notepad++) and search for the string '''100%''' (the files that appears with a 100% has been archived but are not compressed). Is needed to do it this way semi automatized because is usual to find psarc with thousand of files inside
*Check how many files are not compressed, his sizes, and file extensions
**If there are no files with 100% or if there are only a few and his sizes are minimal this is normal, it means the archive doesnt uses per-file compression
**If there some files with the 100%, normal sizes (not minimal), using the same file extension, and can be identifyed (like audio or video formats) then you have a psarc with per-file compression
**If all the files appears as 100% it means the psarc has been created with the compression attibute set as "false" this way:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\by_file.psarc" absolute="true" ignorecase="true" blocksize="65536">
<compression type="zlib" enabled="false" />
...
</syntaxhighlight>}}
'''Step3'''
If the psarc doesnt uses per-file compression then is posible to rebuild it with the '''create by filelist''' method from command line by using an external filelist.txt
If the psarc uses per-file compression then the only way to rebuild it is with the '''create by file''' method by using an xml (the xml includes a list of files like the filelist.txt)
----
*Special rebuild notes:
**Mass effect 3 MAIN.PSARC contains a group of generic files compressed with level 9, and another group of .TXT, .BIN, and .BIK videos not compressed at all. In the creation options suggested above in the table the compression level is not defined and this means all them will use the default compression level 9 (so the .BIK files will have a ridiculous 1% or 2% of compression ratio because is the max they will admit). This is not how the original file was created (but works), the correct way to rebuild it is by defining specific compression levels "per file" in a predefined .xml
**Killzone 3 data_ps3.psarc (BCES01007 version) contains 8324 files (included 5.3GB of audio files for 21 languages with a compression of around 50%)... 2883 of all the files uses the same path/filenames repeated up to 3 times (because was created using 3 or more different working directories). This duplication of paths/filenames inside the .psarc in the practise means when doing a standard extraction 2833 files will be missing, overwrited, or they will give an error at extraction time, the correct way to mess with it is by doing several partiall extractions to different directories, and rebuild it by using a preconfigured .xml where the different paths for each file are specifyed, when rebuilding is also needed to use the --strip option several times to remove part of the paths from all the different working directories, this way the paths/filenames will be duplicated inside the .psarc archive (but are different files located at different positions and with a different ID number assigned).
**Ape Escape target.psarc includes "dupes" (or duplicated files) in the TOC (table of contents) of the psarc archive. This method used at creation time basically works by making several entries of the TOC to point to the same file, this way a single file inside the psarc is indexed several times in the TOC and can be accessed from several different paths/filenames. The only way to identify this dupes before extraction is by reading the TOC of the psarc for all the files and compare wich position are pointing to. As an example the original size of target.psarc is 328mb... after a "standard" extraction is 2.52GB (this extraction doesnt identify the dupes so are extracted several times under different paths/filenames)... if you try to rebuild it again his final size will be much bigger than the original target.psarc
----
*The file paths inside filelist.txt or inside an xml admits 2 formats:
**'''full PC paths''' (where the full PC file path included the device letter is used by psarc.exe to locate the file in any device and/or any folder). This method is the most flexible but needs an '''strip''' command to remove part of the PC path when creating the psarc archive
**'''relative to work directory paths''' (where work directory is the path to psarc.exe and the files needs to be placed in a subfolder under it). This method needs to copy psarc.exe to the parent folder of the files
The file list we need to generate contains the access paths stored in the '''manifest''', the easy way to have have a copy of the manifest is by using the '''list''' command of psarc tool
The output of the '''list''' command has some characters that are needed ro remove or replace, the purpose of automatizing this process by using regular expressions is because usually psarc files contains thousand of files, the examples used here are commands for fnr.exe (find and replace tool) and contains regular expressions (to search) and a character strings (to replace)
===Generating a filelist.txt by using regular expressions===
{{Boxframe3|content='''Generating a filelist.txt, step-by-step summary'''
* Step 1 - Save list command output as a .txt
* Step 2 - Remove first line
* Step 3 - Remove parentheses
* Step 4 - Remove last line
* Step 5 - Replace slashes (optional, recommended)
* Step 6 - Add local paths (optional, recommended)
** Step 6a - Absolute flag blind fix (optional, recommended)
}}
*'''Step 1 - Save list command output as a .txt'''
Generate a .txt file containing the output of the '''list''' comand
{{Boxframe1|content=
{{Keyboard|content=<syntaxhighlight lang="bash">C:\>psarc.exe list "C:\psarctests\source files\test.psarc" > "C:\psarctests\filelist.txt"</syntaxhighlight>}}
The file generated by the list command will have this content (note there is en empty line at the end):
Listing C:\psarctests\source files\test.psarc
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142/6142 100%)
<br>}}
*'''Step 2 - Remove first line'''
{{Boxframe1|content=
find (and replace by nothing):
Listing.*\n
The resulting file:
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142/6142 100%)
<br>}}
*'''Step 3 - Remove parentheses'''
{{Boxframe1|content=
find (and replace by nothing):
[^\b]\(.*\)
The resulting file:
dummy.txt
BMPfolder1/Image1.bmp
JPGfolder1/JPGfolder2/Image2.jpg
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png
<br>}}
*'''Step 4 - Remove last line'''
{{Boxframe1|content=
find (and replace by nothing):
\r\n$
The resulting file:
dummy.txt
BMPfolder1/Image1.bmp
JPGfolder1/JPGfolder2/Image2.jpg
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png
<br>}}
*'''Step 5 - Replace slashes (optional, recommended)'''
This step is optional, both slashes are valid, but is good to do it to standarize all paths formats, otherway is a mess
{{Boxframe1|content=
find:
/
replace by:
\\
The resulting file:
dummy.txt
BMPfolder1\Image1.bmp
JPGfolder1\JPGfolder2\Image2.jpg
PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
<br>}}
*'''Step 6 - Add local paths (optional, recommended)'''
Now is needed to add the local paths (where the psarc contents are decompressed), e.g: '''C:\psarctests\source files\test\''', remember this is exactly the part of the path that is needed to '''strip''' later (because we dont want to include our local path '''C:\psarctests\source files\test\''' inside the manifest)
This is a perfect filelist.txt that can be used for the rebuild method '''by filelist''' from command line (usefull when the psarc doesnt uses per-file compression), remember is needed to use the '''strip''' option
{{Boxframe1|content=
find:
^
replace by:
C:\\psarctests\\source files\\test\\
The resulting file:
C:\psarctests\source files\test\dummy.txt
C:\psarctests\source files\test\BMPfolder1\Image1.bmp
C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
<br>}}
*'''Step 6a - Absolute flag blind fix (optional, recommended)'''
The purpose of this step is to fix a posible problem that could appear in step 6, the psarc used as an example in step 1 to generate the initial list of files was created without '''archive flags''' (in other words, his access paths in the manifest was '''relative''' paths)
The other posible paths format used by the manifest is when the psarc was created with '''absolute''' archive flag, in this case all the lines of the file list in step 5 starts with an slash \ (e.g: the first file in the list that is supposed to be archived in the root of the psarc should be listed as '''\dummy.txt''' instead of '''dummy.txt'''
In step 6 is added a local path that ends with an slash too... so the result is '''C:\psarctests\source files\test\\dummy.txt''' (note the double slash), this is wrong and this step fixes it blindlly (because doesnt matters if the problem exists or not, the final result will be the same)
{{Boxframe1|content=
find:
\\\\
replace by:
\\
<br>}}
----
===Generating a XML by using regular expressions===
{{Boxframe3|content='''Generating a xml, step-by-step summary'''
* Step 1 - Save list command output as a list.txt
* Step 2 - Replace slashes
* Step 3 - Replace first line start (preserves original .psarc path)
* Step 4 - Replace first line end (for relative flag)
* Step 5 - Replace first line end (for absolute flag)
* Step 6 - Replace parentheses (per-file compression autodetection)
* Step 7 - Replace other parentheses
* Step 8 - Replace last line
* Step 9 - Absolute flag blind fix
}}
*'''Step 1 - Save list command output as a list.txt'''
Generate a list.txt file containing the output of the '''list''' command
{{Boxframe1|content=
{{Keyboard|content=<syntaxhighlight lang="bash">C:\>psarc.exe list "C:\psarctests\source files\test.psarc" > "C:\psarctests\list.txt"</syntaxhighlight>}}
The file generated by the list command will have this content:
{{Boxcode|code=<syntaxhighlight lang="xml">
Listing C:\psarctests\source files\test.psarc
/dummy.txt (0/0 100%)
/BMPfolder1/Image1.bmp (8018/6220854 0%)
/JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
/PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142/6142 100%)
</syntaxhighlight>}}
*Notes of the example:
**The original path of the .psarc is '''C:\psarctests\source files\test.psarc''' (it will be used as the path where the rebuild .psarc will be created)
**Paths starts with an slash  '''/''' (so the .psarc was created with absolute flag)
**'''dummy.txt''' and '''Image3.png''' was archived without compression (appears with 100%)
**There is an empty line at the end (not visible in wiki because yeah... is empty)
}}
*'''Step 2 - Replace slashes'''
This step is to standarize paths formats
{{Boxframe1|content=
find:
/
replace by:
\\
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
Listing C:\psarctests\source files\test.psarc
\dummy.txt (0\0 100%)
\BMPfolder1\Image1.bmp (8018\6220854 0%)
\JPGfolder1\JPGfolder2\Image2.jpg (209\12524 1%)
\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png (6142\6142 100%)
</syntaxhighlight>}}
}}
*'''Step 3 - Replace first line start (preserves original .psarc path)'''
This step keeps the original local path of the .psarc file that appears in the output of the list command (is the path where the .psarc will be created)
{{Boxframe1|content=
find:
Listing.
replace by:
<psarc>\r\n\t<create archive="
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\source files\test.psarc
\dummy.txt (0\0 100%)
\BMPfolder1\Image1.bmp (8018\6220854 0%)
\JPGfolder1\JPGfolder2\Image2.jpg (209\12524 1%)
\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png (6142\6142 100%)
</syntaxhighlight>}}
}}
*'''Step 4 - Replace first line end (for relative flag)'''
Relative paths is the default value, this step completes the replacement of the first line by using the default '''absolute="false"''' attribute
{{Boxframe1|content=
find:
\.psarc\r\n
replace by:
\.psarc" absolute="false" ignorecase="false">\r\n\t\t<compression type="zlib" />\r\n\t\t<strip regex="C:\\source\\folder\\" />\r\n\r\n\t\t<file path="C:\\source\\folder\\
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\source files\test.psarc" absolute="false" ignorecase="false">
<compression type="zlib" />
<strip regex="C:\source\folder\" />
<file path="C:\source\folder\\dummy.txt (0\0 100%)
\BMPfolder1\Image1.bmp (8018\6220854 0%)
\JPGfolder1\JPGfolder2\Image2.jpg (209\12524 1%)
\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png (6142\6142 100%)
</syntaxhighlight>}}
}}
*'''Step 5 - Replace first line end (for absolute flag)'''
This step finds the same pattern replaced in step before followed by an slash, if found is replaced by the same pattern but with '''absolute="true"''' attribute
{{Boxframe1|content=
find:
\.psarc" absolute="false" ignorecase="false">\r\n\t\t<compression type="zlib" />\r\n\t\t<strip regex="C:\\source\\folder\\" />\r\n\r\n\t\t<file path="C:\\source\\folder\\\\
replace by:
\.psarc" absolute="true" ignorecase="false">\r\n\t\t<compression type="zlib" />\r\n\t\t<strip regex="C:\\source\\folder\\" />\r\n\r\n\t\t<file path="C:\\source\\folder\\\\
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\source files\test.psarc" absolute="true" ignorecase="false">
<compression type="zlib" />
<strip regex="C:\source\folder\" />
<file path="C:\source\folder\\dummy.txt (0\0 100%)
\BMPfolder1\Image1.bmp (8018\6220854 0%)
\JPGfolder1\JPGfolder2\Image2.jpg (209\12524 1%)
\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png (6142\6142 100%)
</syntaxhighlight>}}
}}
*'''Step 6 - Replace parentheses (per-file compression autodetection)'''
This step replaces only the parentheses for the lines of the files that was archived without compression and adds the attribute '''compressed="false"'''
{{Boxframe1|content=
find:
[^\b]\(.*100.\)\r\n
replace by:
" compressed="false" />\r\n\t\t<file path="C:\\source\\folder\\
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\source files\test.psarc" absolute="true" ignorecase="false">
<compression type="zlib" />
<strip regex="C:\source\folder\" />
<file path="C:\source\folder\\dummy.txt" compressed="false" />
<file path="C:\source\folder\\BMPfolder1\Image1.bmp (8018\6220854 0%)
\JPGfolder1\JPGfolder2\Image2.jpg (209\12524 1%)
\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png" compressed="false" />
<file path="C:\source\folder\
</syntaxhighlight>}}
}}
*'''Step 7 - Replace other parentheses'''
This step replaces all the other parentheses for the lines of the files that willl be compressed
{{Boxframe1|content=
find:
[^\b]\(.*\n
replace by:
" />\r\n\t\t<file path="C:\\source\\folder\\
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\source files\test.psarc" absolute="true" ignorecase="false">
<compression type="zlib" />
<strip regex="C:\source\folder\" />
<file path="C:\source\folder\\dummy.txt" compressed="false" />
<file path="C:\source\folder\\BMPfolder1\Image1.bmp" />
<file path="C:\source\folder\\JPGfolder1\JPGfolder2\Image2.jpg" />
<file path="C:\source\folder\\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png" compressed="false" />
<file path="C:\source\folder\
</syntaxhighlight>}}
}}
*'''Step 8 - Replace last line'''
This step replaces a useless line at the end and completes the xml structure
{{Boxframe1|content=
find:
\t\t<file path="C:\\source\\folder\\$
replace by:
\t</create>\r\n</psarc>
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\source files\test.psarc" absolute="true" ignorecase="false">
<compression type="zlib" />
<strip regex="C:\source\folder\" />
<file path="C:\source\folder\\dummy.txt" compressed="false" />
<file path="C:\source\folder\\BMPfolder1\Image1.bmp" />
<file path="C:\source\folder\\JPGfolder1\JPGfolder2\Image2.jpg" />
<file path="C:\source\folder\\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png" compressed="false" />
</create>
</psarc>
</syntaxhighlight>}}
}}
*'''Step 9 - Absolute flag blind fix'''
The purpose of this step is to fix a posible problem that only happens when the .psarc was created with absolute flag (when the paths created from the list command starts with an slash, like in the examples)
The fix is made blindlly because it will remove an slash only if two consecutive slashes are found (if there are no double slashes it will do nothing)
{{Boxframe1|content=
find:
\\\\
replace by:
\\
The resulting file:
{{Boxcode|code=<syntaxhighlight lang="xml">
<psarc>
<create archive="C:\psarctests\source files\test.psarc" absolute="true" ignorecase="false">
<compression type="zlib" />
<strip regex="C:\source\folder\" />
<file path="C:\source\folder\dummy.txt" compressed="false" />
<file path="C:\source\folder\BMPfolder1\Image1.bmp" />
<file path="C:\source\folder\JPGfolder1\JPGfolder2\Image2.jpg" />
<file path="C:\source\folder\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png" compressed="false" />
</create>
</psarc>
</syntaxhighlight>}}
}}


=Games or Apps using PSARC files=
=Games or Apps using PSARC files=


{| class="wikitable"
{| class="wikitable"
! colspan="13" {{cellcolors|lightblue}} {{icon content ps3}}
|-
! colspan="2" | Game/App info !! colspan="5" | PSARC Header info !! rowspan="2" | Compression<BR />Method !! rowspan="2" | Notes
|-
! TITLE !! PSARC files || Version<BR />(offset 0x04) !! Compression<BR />(offset 0x08) !! TOC entry size<BR />(offset 0x10) !! Block Size<BR />(offset 0x18) !! Flags<BR />(offset 0x1C)
|-
| rowspan="3" | Ape Escape || sound.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000000 (no flags) || no compress || Contains not-compressed audio
|-
| <language>.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all ||
|-
| target.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || TOC dupes!!!, see notes below
|-
| Atelier Rorona Plus || ? || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || ? ||
|-
| Eiyuu Densetsu Sen no Kiseki ||  data.psarc || ||  ||  ||  ||  ||  ||
|-
| Eiyuu Densetsu Sen no Kiseki II ||  data.psarc  || ||  ||  ||  ||  ||  ||
|-
| God of War III || All || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all ||
|-
| rowspan="6" | God of War Ascension || INTROCIN.PSARC ||  ||  ||  ||  ||  || no compress || Intro video
|-
| CRTN.PSARC<BR />CYN.PSARC<BR />FURY.PSARC<BR />HECA.PSARC<BR />HRTN.PSARC<BR />LAN.PSARC<BR />PHI.PSARC<BR />STAT.PSARC<BR />STINT.PSARC<BR />TEM.PSARC ||  ||  ||  ||  ||  || per-file compress || Contains not-compressed audio, and other compressed files<BR />game levels, and game levels soundtracks
|-
| RESOURCES.PSARC ||  ||  ||  ||  ||  || per-file compress || Game resources, included not-compresed audio
|-
| <LANGUAGE>.PSARC ||  ||  ||  ||  ||  || per-file compress || Contains not-compressed audio, and other compressed files
|-
| SHELL.PSARC<BR />TPPS.PSARC ||  ||  ||  ||  ||  || compress all || Main menu<BR />Game updates stub (dummy file)
|-
| GAME.PSARC<BR />(or all others ?) || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || Game settings
|-
| ICO & Shadow of the Colossus HD ||  ||  ||  ||  ||  ||  ||  ||
|-
| Killzone 3 || data_ps3.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000001 (ignorecase) || compress all || created from 3 working directories, lot of duplicated paths
|-
| rowspan="3" | Mass Effect 3 || AUDIO.PSARC || 00010004 || lzma || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || no compress || Contains not-compressed audio
|-
| MAIN.PSARC || 00010004 || lzma || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed video, and other compressed files
|-
| TEXTURES.PSARC ||  ||  ||  ||  ||  ||  ||
|-
| Metal Gear Solid V. Ground Zeroes || data.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || per-file compress || whole game, included texture.qar (452mb) duplicated out of the .psarc
|-
| Motorstorm Pacific Rift ||  ? || ||  ||  ||  ||  ||  || 
|-
| Ni No Kuni || bd03.adat ?<BR />hd01.adat ?<BR />hd05<language>.adat ? || ||  ||  ||  ||  ||  || .psarc file extensions renamed to .adat
|-
| Ninja Gaiden 3 Razors Edge ||  || ||  ||  ||  ||  ||  ||
|-
| rowspan="2" | Ratchet & Clank. Tools of Destruction || *_uncached.psarc || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
|-
| All others || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all ||
|-
|-
| rowspan="2" | Ratchet & Clank. Quest for Booty || *_uncached.psarc || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
! colspan="3" | External information !! colspan="5" | PSARC Header info !! rowspan="2" | Notes
|-
|-
| All others || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all || global_cached.psarc contains TOC dupes!!! (icon0.png)
! Platform !! TITLE_ID !! TITLE !! Version<BR />(offset 0x04) !! Compression<BR />(offset 0x08) !! TOC entry size<BR />(offset 0x10) !! Block Size<BR />(offset 0x18) !! Flags<BR />(offset 0x1C)
|-
|-
| rowspan="2" | Ratchet & Clank. A Crack in Time || *_uncached.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
| {{icon content ps3}} || || Ape Escape || 00010004 || Zlib || 0000001E || 00010000 || 00000002 || uses full paths (created with --absolute)
|-
|-
| All others || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all ||  
| {{icon content ps3}} || || Atelier Rorona Plus || 00010004 || zlib || 0000001E || 00010000 || 00000002 ||
|-
|-
| rowspan="3" | Ratchet & Clank. Into the Nexus || global_cached.psarc<BR />level_cached.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed files, and other compressed files
| {{icon content ps3}} || || God of War. Ascension || 00010004 || zlib || 0000001E || 00010000 || 00000002 ||  
|-
|-
| global_uncached.psarc<BR />global_sound_**.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
| {{icon content ps3}} || || Killzone 3 || 00010004 || zlib || 0000001E || 00010000 || 00000001 ||  
|-
|-
| All others || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all ||
| {{icon content ps3}} || || Mass Effect 3 || 00010004 || lzma || 0000001E || 00010000 || 00000003 || AUDIO.PSARC created with: --lzma --nocompress --absolute --ignorecase<br />MAIN.PSARC created with: --lzma --absolute --ignorecase
|-
|-
|Sonic the Fighters
| {{icon content ps3}} || || Motorstorm. Pacific Rift ||  ||  || || || ||  
|rom.psarc
|
|
|
|
|
|
|Contains arcade ROM files, audio, and UI graphics
|-
|-
| The Last Of Us || All ? || 00010003 || zlib || 0000001E || 00010000 || 00000000 (no flags) ||  ||  
| {{icon content ps3}} || || Ni No Kuni || || || || ||  || .psarc file extensions renamed to .adat
|-
|-
| The Shoot || All || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) ||  ||
| {{icon content ps3}} || || The Last Of Us || 00010003 || zlib || 0000001E || 00010000 || 00000000 || the game can load files from decompressed psarcs (because the original psarcs doesnt uses flags)
|-
|-
| Time and Eternity || || || || || || || ||  
| {{icon content ps3}} || || Uncharted 2 || 00010003 || zlib || 0000001E || 00010000 || 00000000 || the game can load files from decompressed psarcs (because the original psarcs doesnt uses flags)
|-
|-
| Uncharted 2 || All ? || 00010003 || zlib || 0000001E || 00010000 || 00000000 (no flags) ||  ||  
| {{icon content ps3}} || || Warhawk || || || || ||  ||  
|-
|-
| Uncharted 3 || All || 00010003 || zlib || 0000001E || 00010000 || 00000000 (no flags) ||  ||
|  {{icon content ps4}} || || VidZone || 00010004 || zlib || 0000001E || 00010000 || 00000000 ||  
|-
| Warhawk || ? ||  ||  ||  ||  ||  ||  ||
|-
| rowspan="2" | White Knight Chronicles II || All .psarc || 00010003 || zlib || 0000001E || 00010000 || 00000002 (absolute) || no compress || Contains not-compressed audio
|-
| All .psarc.sdat || 00010003 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || Default compression, NPD signed psarcs
|-
| rowspan="2" | Wipeout HD Fury || data01.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || no compress || Contains not-compressed audio
|-
| All others || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all ||
|-
! colspan="13" {{cellcolors|lightblue}} {{icon content ps4}}
|-
! colspan="2" | Game/App info !! colspan="5" | PSARC Header info !! rowspan="2" | Compression<BR />Method !! rowspan="2" | Notes
|-
! TITLE !! PSARC files || Version<BR />(offset 0x04) !! Compression<BR />(offset 0x08) !! TOC entry size<BR />(offset 0x10) !! Block Size<BR />(offset 0x18) !! Flags<BR />(offset 0x1C)
|-
| No Man's Sky || *.pak  || 00010004 || zlib || 0000001E || 00010000 || 00000001 (ignorecase)  || all compress? || .PAK files are actually PSARC files, see https://www.youtube.com/watch?v=xlJfy1dvmGI <abbr title="the original PSARC uses flag --ignorecase it can be seen at minute 1:12 but when he rebuilds it he uses the flag --absolute instead, this is wrong though the game seems to dont care but is important and can cause some of the files to dont load">there is a mistake in the video</abbr>
|-
| VidZone || vidzone*.db.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000000 (no flags) || compress all || Vidzone is a web service, the .psarc is hosted in the web
|-
! colspan="13" {{cellcolors|lightblue}} {{icon content psvita}}
|-
! colspan="2" | Game/App info !! colspan="5" | PSARC Header info !! rowspan="2" | Compression<BR />Method !! rowspan="2" | Notes
|-
! TITLE !! PSARC files || Version<BR />(offset 0x04) !! Compression<BR />(offset 0x08) !! TOC entry size<BR />(offset 0x10) !! Block Size<BR />(offset 0x18) !! Flags<BR />(offset 0x1C)
|-
| Gravity Rush || Gravite.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000000 (no flags) ||  ||
|-
| Chasm || content.psarc || 00010004 || zlib || 0000001E ||00010000 || 00000000 (no flags) ||  ||  
|}
|}


*Other games that probably uses PSARC's
*Other games that probably uses PSARC's
**Uncharted 1?
**Uncharted 1?, and 3?
**Killzone colletion ?
**Killzone colletion ?
**God of War. III ?
**God of War. Collection ?
**God of War. Collection ?
**other Motorstorms ?
**other Motorstorms ?
*Rebuild notes:
**Mass effect 3 MAIN.PSARC contains a folder with generic files (compressed with level 9) and another folder with .BIK videos (not compressed at all). In the creation options suggested above in the table the compression level is not defined and this means all them will use the default compression level 9 (so the .BIK files will have an 1% or 2% of compression ratio). This is not how the original file was created (but works), it seems there is a way to define specific compression levels "per file" or "per folder" (by using a DTD.XML filelist?)


{{File Formats}}
{{File Formats}}
<noinclude>
<noinclude>[[Category:Main]]</noinclude>
[[Category:Main]]
</noinclude>
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page:

Retrieved from "http://www.psdevwiki.com/ps3/PlayStation_archive_(PSARC)"