Editing PlayStation archive (PSARC)

=Description=
'''P'''lay'''S'''tation '''ARC'''hive is a generic file container that uses an internal hierarchy of subfolders with defined access paths, and optional zlib or lzma per-file compression


The access paths are stored in a special file generated at build time called '''manifest''', It mimics a standard tree structure of folders/files but the root of the hierarchy is not defined, this way the contents of the psarc can be "mounted" by the system/game as part of his filesystem at any place and under any device letter/name

There are 3 different methods to generate this paths that defines how the .psarc contents are mounted by the system/game, this methods are enabled by the '''archive flags''' stored in the header, the system/game knows how to recreate the filesystem paths and mounts the .psarc contents by reading the '''archive flags''' that are needed to process the access paths in the '''manifest'''


The compression algorithms, the PS3 system, and the .psarc format, allows for 9 compression levels but in the practise only are used level 0 (no compression) or 9 (max compression used as the default compression level)

Compression level 9 for generic file types results as a compression ratio of around 50% of the original size, the final compression ratio can vary for different types of files, usually multimedia files (video, audio, etc) doesnt admits much compression because are already compressed originally (as example, max compression ratio for .BIK video and .MP3 audio doesnt reachs 1% or 2%). For this reason is better to dont compress multimedia files because the size reduction is ridiculous and read access times can be reduced (causing a delay/lag/freeze when trying to load the file)

Very small files (smaller than 100 bytes or so) as well as dummy files (0 bytes) doesnt admits compression because are so small that the compression algorithm is not able to reduce them, they will be stored without compression inside the .psarc archive even when is applyed compression over them. When listing the contents of a .psarc with this kind of files will be displayed with a percentage of 100% and both his compressed and decompressed sizes the same value

<small>
{{Zlib Header}}
</small>

=Structure=
See {{Talk}} page
==Header==
PSARC header example:

 '''Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F'''
 00000000  <span style="background:#ff6666;">50 53 41 52</span> <span style="background:#66ff66;">00 01 00 04</span> <span style="background:#ffff66;">7A 6C 69 62</span> <span style="background:#6666ff;">00 01 23 BA</span>  <span style="background:#ff6666;">PSAR</span>....<span style="background:#ffff66;">zlib</span>..#º
 00000010  <span style="background:#dd00dd;">00 00 00 1E</span> <span style="background:#dddd00;">00 00 09 16</span> <span style="background:#dddddd;">00 01 00 00</span> <span style="background:#d0000d;">00 00 00 02</span>  ................

{| class="wikitable"
|-
! Offset !! Size !! Name !! Example !! Value (conversion) !! Notes
|+PSARC Header
| style="background-color:#ff6666;" | 0x00 || style="background-color:#ff6666;" | 0x04 || '''magic''' || 50 53 41 52 || PSAR || '''P'''lay'''S'''tation '''AR'''chive
|-
| style="background-color:#66ff66;" | 0x04 || style="background-color:#66ff66;" | 0x04 || '''version''' || 00 01 00 04 || v1.4 || First 2 bytes is the '''major version''', next 2 bytes is the '''minor version'''
|-
| style="background-color:#ffff66;" | 0x08 || style="background-color:#ffff66;" | 0x04 || '''compression type''' || 7A 6C 69 62 || zlib || '''zlib''' (default)<br>'''lzma'''
|-
| style="background-color:#6666ff;" | 0x0C || style="background-color:#6666ff;" | 0x04 || '''toc length''' || 00 01 23 BA || 0x123BA || 
|-
| style="background-color:#dd00dd;" | 0x10 || style="background-color:#dd00dd;" | 0x04 || '''toc entry size''' || 00 00 00 1E || 30 Bytes || Default is 30 bytes
|-
| style="background-color:#dddd00;" | 0x14 || style="background-color:#dddd00;" | 0x04 || '''toc entries''' || 00 00 09 16 || 1 manifest + 2325 files || The '''manifest''' is always included as the first file in the archive without an assigned ID
|-
| style="background-color:#dddddd;" | 0x18 || style="background-color:#dddddd;" | 0x04 || '''block size''' || 00 01 00 00 || 65536 Bytes || Default is 65536 bytes
|-
| style="background-color:#d0000d;" | 0x1C || style="background-color:#d0000d;" | 0x04 || '''archive flags''' || 00 00 00 02 || Absolute paths || 0 = '''relative''' paths (default)<br>1 = '''ignorecase''' paths<br>2 = '''absolute''' paths
|}

*'''Relative''' (default, no flags)
**Default value when the .psarc is created from command line or an .xml and no special access paths modes are specifyed
**The paths in the '''manifest''' doesnt have an slash character at the start of every line, the system accesses the files exactly like if the .psarc was a folder itself
**e.g: '''Folder/File.bin"'''
**In the games that uses .psarc's without flags (like ''uncharted'' series or ''the last of us'') is posible to replace the psarc by a folder with the same name of the psarc and his contents decompressed inside

*'''Ignorecase''' flag
**Enabled by using the option '''--ignorecase''' in command line or '''ignorecase="true"''' in the .xml
**The paths in the '''manifest''' are case insensitive (doesnt matters wich characters are in capitals)

*'''Absolute''' flag
**Enabled by using the option '''--absolute''' in command line or '''absolute="true"''' in the .xml
**The paths in the '''manifest''' have an slash character at the start of every line, <!-- the .psarc contents are mounted directly in the root of the application space (under USRDIR)... this is hidden because is a bit speculative, im not so sure but this is what it looks -->
**e.g: '''/Folder/File.bin"'''

==TOC Table==

==Blocks info table==

==File table==
The compression is applyed "per-block", is posible to know the compression level by looking at the zlib header

===Manifest===
Manifest is the first file inside the psarc filetable, doesnt appears as a file when using the '''--list''' command and doesnt have an assigned '''ID'''

In windows all the paths uses the slash "\" but when the psarc is created the paths are stored inside the manifest as "/". When making a '''--list''' command over a psarc the slashes will appear as "/"

To make things more generic all examples in wiki uses full PC paths, this allows to place the sources (files to create, or psarc to extract), targets (files to create, or psarc to extract), and psarc.exe in any path of the PC, using full paths makes needed the use of the "strip" option in all creation process to remove part of the PC path and device letter from the access paths stored in the '''manifest'''

=PSARC Tools=
There are several versions of PSARC related tools, features has been implemented along the different versions and is hard to keep a record of them, please help filling the info in the page

GUI versions are derivated from the command line versions

==Open PSARC PS3 Extractor==
By Matthieu Milan. It allows you to extract PSARC archive data in linux

Source code: https://www.ferb.fr/ps3/PSARC/

==PSARC tool==
Port of Matthieu Milan's open PSARC PS3 extractor to Windows. Tool written by Matthieu Milan (@usineur). Ported to VS2012 by AlexAltea.

source code: https://github.com/AlexAltea/psarc-tool

 '''Usage:'''
  psarc [option] filename
 
 '''Options:'''
  -l                Create a text file that lists the file id, size, and name of every file in the archive.
  -x                Extracts all files.
  -e START END      Extracts files with the file id specified by the range between START and END (inclusive).

==PSARC Extractor==
By Insomniac @ xentax forums, download link: http://www.ps3hax.net/downloads.php?do=file&id=452 and http://www.modcontrol.com/Board/pc-tools/28869-psarc-ps3-extractor.html

 '''Usage:'''
  PSARC [flag] <fileName>
 
 '''Flags:'''
  -l             Creates a text file that lists the File ID, Size, and Name of every file in the archive.
  -e START END   Extracts files with the File ID specified by the range between START and END (inclusive). 
  <blank>        Extracts all files.

*Examples:
**Extract all files from data.psarc :    	PSARC data.psarc
**Create list of files from data.psarc :     	PSARC -l data.psarc
**Extract file	with File ID 5 :		PSARC -e 5 5 data.psarc
**Extract files with File ID 7 through 12 : 	PSARC -e 7 12 data.psarc 


The flag -l creates a .txt file with a list of all the contents of the archive, the info included is: '''File ID''', '''File original size''', and '''File path''' inside psarc archive

Example of a .txt file created with the -l flag:
 '''ID       Size         Name'''
 1      | 7,39 KB    | /my/files/dummies/dummy1.bin
 2      | 8,80 KB    | /my/files/dummies/dummy2.bin
 3      | 3,30 KB    | /my/files/dummies/dummy3.bin

==PSARC==
 1.60.008 SDK : x
 1.92.001 SDK : x
 3.40.001 SDK : psarc-138.002 (C++), built on Feb 15 2010 at 16:17:41
 3.41.001 SDK : psarc-138.002 (C++), built on Feb 15 2010 at 16:17:41
 3.60.001 SDK : psarc-138.002 (C++), built on Feb 15 2010 at 16:17:41
 3.70.001 SDK : psarc-138.002 (C++), built on Feb 15 2010 at 16:17:41
 4.00.001 SDK : psarc-1310.001 (C++), built on Nov 16 2011 at 03:31:36
 4.50.001 SDK : psarc-1310.001 (C++), built on Nov 16 2011 at 03:31:36

*From xentax forums: http://forum.xentax.com/viewtopic.php?p=44228&sid=0a7b5167ba4599f71f85471119c918a6#p44228 Download link: http://www.mediafire.com/?o3wy35uublreh

===help===
{{Keyboard|content=
'''C:\>psarc.exe --help'''
'''usage:'''
 psarc verb [options] [file...]
 psarc --xml=XMLFILE
 
'''verbs:'''
 create                                  Create an archive. (default)
 extract                                 Extract contents of an existing archive.
 list                                    List contents of an existing archive.
 dump                                    Print detailed info about archive for unit testing.
 verify                                  Verify an existing archive's structural integrity and ensure that all files can be decompressed.
 dtd                                     Display a DTD describing psarc's XML input syntax.

'''general options:'''
 -h, --help                              Show this help message and exit.
     --version                           Display version and exit.
 -d, --debug                             Debug: Show debug messages.
 -v, --verbose                           Verbose: Show additional progress. (default)
 -q, --quiet                             Quiet: Don't show any progress.
 -y, --overwrite                         Overwrite existing files when creating/extracting.
 --xml=XMLFILE                           XML list of actions to perform.

'''create options:'''
 -oFILE, --output=FILE                   Archive filename to create.
 -IINPUTFILE, --inputfile=INPUTFILE      Inputfile listing files to archive. Consider --xml instead, which gives you more control.
 -m, --mself                             Create a PSARC-MSELF hybrid file for PS3, which can contain encrypted special files like SDATA, SPRX, and SPU SELF.
 --zlib                                  Use Zlib when compressing. (default)
 --lzma                                  Use LZMA when compressing. (usually for PS3 PSN)
 --level=N                               Compression quality. 1 is fastest, 9 is best. (default = 9)
 -N, --nocompress                        Store all files uncompressed in the archive.
 -bBS, --blocksize=BS                    Use blocks of size BS. (default = 64KiB)
 -jJOBS, --jobs=JOBS                     Compression threads to run at a time. (default = number of CPUs)
 -sREGEX, --strip=REGEX                  Perl-compatible regex specifying a prefix to strip from the pathnames stored in the archive. This may be specified more than once. (default = current dir)
 -S, --strip-all                         Strip all paths from files stored in the archive.
 -a, --absolute                          Make the paths within the archive absolute.
 -R, --relative                          Make the paths within the archive relative. (default)
 -i, --ignorecase                        Make the archive directory case-insensitive.
 --exclude=WILDCARD                      Wildcard specifying files to exclude.
 --skip-missing-files                    If set then ignore it when a file cannot be found.
 --mergedups                             Compare the content of all files, and merge identical files so that only one copy of the data is included.

'''extract options:'''
 --input=FILE                            Archive to extract files from. (default is first file argument)
 --to=DIRECTORY                          Directory to write extracted files to. (default is current directory)
}}

===dtd===
* Display a DTD describing psarc's XML input syntax.

The output of this command is a layout that defines the structure of an .xml document. See: http://www.w3schools.com/DTD/

{{Keyboard|content=
'''C:\>psarc.exe dtd'''<nowiki>
<!ELEMENT psarc (create|extract)+>

<!ELEMENT create (compression|strip|exclude|file|directory|filelist)+>
<!ATTLIST create archive CDATA #IMPLIED
                 absolute (true|false) "false"
                 ignorecase (true|false) "false"
                 mergedups (true|false) "false"
                 stripall (true|false) "false"
                 blocksize CDATA "65536"
                 jobs CDATA #IMPLIED
                 skipmissingfiles (true|false) "false"
                 format (psarc|psarc-mself) "psarc"
                 overwrite (true|false) "false">

<!ELEMENT compression EMPTY>
<!ATTLIST compression type (zlib|lzma) "zlib"
                      level (1|2|3|4|5|6|7|8|9) "9"
                      enabled (true|false) "true">

<!ELEMENT strip EMPTY>
<!ATTLIST strip regex CDATA #REQUIRED>

<!ELEMENT exclude EMPTY>
<!ATTLIST exclude regex CDATA #IMPLIED
                  wildcard CDATA #IMPLIED>

<!ELEMENT file (CDATA)>
<!ATTLIST file wildcard CDATA #IMPLIED
               regex CDATA #IMPLIED
               path CDATA #IMPLIED
               archivepath CDATA #IMPLIED
               fromarchive CDATA #IMPLIED
               compressed (true|false) #IMPLIED
               skipifmissing (true|false) #IMPLIED>

<!ELEMENT filelist EMPTY>
<!ATTLIST filelist path CDATA #REQUIRED>

<!ELEMENT directory EMPTY>
<!ATTLIST directory path CDATA #REQUIRED
                    archivepath CDATA #IMPLIED
                    fromarchive CDATA #IMPLIED
                    compressed (true|false) #IMPLIED
                    skipifmissing (true|false) #IMPLIED>

<!ELEMENT extract (file)+>
<!ATTLIST extract archive CDATA #IMPLIED
                  input CDATA #IMPLIED
                  to CDATA #IMPLIED
                  stripall (true|false) "false"
                  skipmissingfiles (true|false) "false"
                  overwrite (true|false) "false">
</nowiki>}}

*DTD Notes:
**Elements are defined in the DTD as: '''<!ELEMENT element-name (element-content)>'''
**Attributes are defined in the DTD as: '''<!ATTLIST element-name attribute-name attribute-type attribute-value>'''
**Elements that contains childrens elements that can be repeated several times are defined with a '''+'''
**Character strings attribute data types are defined with: '''CDATA'''
**Required attributes are defined with: '''#REQUIRED''', and optional attributes with: '''#IMPLIED'''

====Performing actions with an XML list====
Is posible to automatize the '''create''' and '''extract''' actions by using an .xml

Using an xml is the most flexible way to use psarc.exe because has full support for all features of the tool (command line doesnt), some of the options of the tool are only available when using an xml, specially per-file attributes like: per-file compression (used by lot of games), or per-file extraction

To use an .xml is needed to prepare it based in this layout
{{Boxframe2|content=
This is the xml representation of the DTD layout containing all the elements and attributes availables together, is only for wiki purpose
{{Boxcode|content=<syntaxhighlight lang="xml">
<psarc>
	<create archive="" absolute="false" ignorecase="false" mergedups="false" stripall="false" blocksize="65536" jobs="" skipmissingfiles="false" format="psarc" overwrite="false">
		<compression type="zlib" level="9" enabled="true" />
		<strip regex="" />
		<exclude regex="" wildcard="" />
		<file wildcard="" regex="" path="" archivepath="" fromarchive="" compressed="true" skipifmissing="false" />
		<directory path="" archivepath="" fromarchive="" compressed="true" skipifmissing="false" />
		<filelist path="" />
	</create>
	<extract archive="" to="" stripall="false" skipmissingfiles="false" overwrite="true">
		<file archivepath="" skipifmissing="false" />
	</extract>
</psarc>
</syntaxhighlight>}}
*The purpose of this XML is to use it as a base layout containing all, but is not posible to use it like that, is needed to delete the tags that are not needed for a specific case, the ones that are incompatibles with other tags, and is needed to add paths, etc...
*Some attributes appears as common in the DTD for "create" and "extract" but are not common, some of them has been deleted to avoid mistakes... but probably is needed to delete some more
}}

When the xml is ready you can run it this way:
{{Keyboard|content=
'''C:\>psarc.exe --xml=C:\DTD_Layout.xml'''
}}

The options '''--verbose''', '''--debug''', and '''--quiet''' cant be used inside the xml, so if needed are specifyed in the command line, this way:
{{Keyboard|content=
'''C:\>psarc.exe --debug --xml=C:\DTD_Layout.xml'''
}}

===verify===
*Verify an existing archive's structural integrity and ensure that all files can be decompressed.
*Output info per-file is: Validating <file ID/number>: - file path inside psarc archive - (file original size in bytes)

{{Keyboard|content=
'''C:\>psarc.exe verify "C:\psarctests\source files\test.psarc"'''
Verifying C:\psarctests\source files\test.psarc
Validating 1: dummy.txt (0 bytes)
Validating 2: BMPfolder1/Image1.bmp (6220854 bytes)
Validating 3: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Validating 4: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
Archive OK
}}

===dump===
*Print detailed info about archive for unit testing.
*Output info per-file is: file path inside psarc archive - file original size - file compressed size - file block start offset ?

{{Keyboard|content=
'''C:\>psarc.exe dump "C:\psarctests\source files\test.psarc"'''
Dumping C:\psarctests\source files\test.psarc
dummy.txt  os=0 cs=0 fb=1
BMPfolder1/Image1.bmp  os=6220854 cs=8018 fb=2
JPGfolder1/JPGfolder2/Image2.jpg  os=12524 cs=209 fb=97
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png  os=6142 cs=6142 fb=98
}}

===list===
*List contents of an existing archive.
*Output info per-file is: file path inside psarc archive - (file compressed size - file original size - compression percentage)
*In the compression percentage: 100% is no reduction, 0% is a huge reduction

{{Keyboard|content=
'''C:\>psarc.exe list "C:\psarctests\source files\test.psarc"'''
Listing C:\psarctests\source files\test.psarc
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142/6142 100%)
}}

{{Boxframe2|content=
{{Boxtip1|content=Is posible to generate a text file containing the output of the '''list''' command by using the character '''>''' (right arrow) and the path/name of the destination file, this is usefull to convert the generated file to a '''filelist.txt''' for rebuilding the psarc archive later}}
{{Keyboard|content='''C:\>psarc.exe list "C:\psarctests\source files\test.psarc" > c:\psarctests\filelist.txt'''}}
}}

----

===create===
* Create an archive.

====create by directory====
Creates a psarc using the contents of a specifyed folder and all subfolders. Is only available when using an .xml because command line doesnt allows to specify a source folder

Is the most rude method to create a psarc because all folders and files will be archived alphabetically based in his names (there is no controll of the ID's that will be assigned to each file in the '''manifest'''). Cant be used to rebuild psarcs

Note in the next examle the file dummy.txt (located in the root of the folder in windows, so considered first) has been archived after BMPfolder1

{{Boxcode|content=CREATE by_directory.xml<syntaxhighlight lang="xml">
<psarc>
	<create archive="C:\psarctests\by_directory.psarc" absolute="false" ignorecase="false">
		<compression type="zlib" enabled="true" />
		<strip regex="C:\psarctests\source files\test" />
		<directory path="C:\psarctests\source files\test" />
	</create>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=
'''C:\>psarc.exe --xml="c:\psarctests\CREATE by_directory.xml"'''
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
Output: C:\psarctests\by_directory.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test
Compressing TOC
Compressing C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Compressing C:\psarctests\source files\test\dummy.txt
Compressing C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Compressing C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png

           4: Total Files Archived
     6239520: Original Size
         108: Manifest (uncompressed)
          72: Manifest (compressed)
         380: TOC size
        8836: Final Size
        4.3%: Directory Overhead
       99.9%: Compression Ratio
           9: Compression Level
'''C:\>psarc.exe list C:\psarctests\by_directory.psarc'''
Listing C:\psarctests\by_directory.psarc
BMPfolder1/Image1.bmp (8018/6220854 0%)
dummy.txt (0/0 100%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (157/6142 2%)
}}

====create by filelist====
This method allows to order the files inside the archive in a specific position (so is posible to know the ID that will have every files before creating the psarc)

When rebuilding a psarc from a game is needed to preserve the original ID's of ALL the files inside the archive (is posible to replace files but never remove). By replacing files (e.g: by dummyes) all the others preserves his positions

The filelist is a plain .txt file where every file is defined by a single line, composed by his path, filename, and file extension, 1 line per file. Is posible to generate this kind of filelists automatically by using the output of the '''--list''' command and some regular expressions to replace characters

The examples used in wiki uses full PC paths to be more flexible (no need to place psarc.exe next to the source folder, actually you can place psarc.exe in c:\ the source folder in d:\ and create the psarc in x:\). When using full paths is mandatory to use the '''--strip''' option with an explicit path or a regular expression (regex) to remove part of the PC path (e.g: if you strip '''C:\psarctests\source files\test''' from '''C:\psarctests\source files\test\BMPfolder1\Image1.bmp''' the resulting path of the file inside the archive will be '''BMPfolder1/Image1.bmp''')

The '''--strip''' option removes part of the paths from the filelist, can be used several times with different stripped paths, this is usefull when the psarc archive is generated from a filelist that contains paths from different folders and/or devices in the PC (e.g: is posible to create a filelist including a file from '''F:\textures\packed\texture1.jpg''' and another file from '''G:\models\packed\model1.xxx''' and strip the paths: '''F:\textures\''' and '''G:\models\''', this way both files will be stored inside the psarc archive together under path: '''packed/texture1.jpg''' and '''packed/model1.xxx''')

First is needed to prepare a '''filelist.txt''' like this example, located in '''C:\psarctests\source files\filelist.txt''', contains the PC paths of the files that are in the folder '''C:\psarctests\source files\test''' and will be included inside the psarc archive:
 C:\psarctests\source files\test\dummy.txt
 C:\psarctests\source files\test\BMPfolder1\Image1.bmp
 C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
 C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png

The psarc archive is created by using the filelist as the '''--inputfile''' and uses an explicit path to '''--strip''' from every file inside the filelist, this way:
{{Keyboard|content='''C:\>psarc.exe create --strip="C:\psarctests\source files\test" --output=C:\psarctests\by_filelist.psarc --inputfile="C:\psarctests\source files\filelist.txt"'''}}

Or you can prepare an .xml that contains the path to the filelist.txt
{{Boxcode|content=CREATE by_filelist.xml<syntaxhighlight lang="xml">
<psarc>
	<create archive="C:\psarctests\by_filelist.psarc" absolute="false" ignorecase="false">
		<compression type="zlib" enabled="true" />
		<strip regex="C:\psarctests\source files\test" />
		<filelist path="C:\psarctests\source files\filelist.txt" />
	</create>
</psarc>
</syntaxhighlight>}}

Then run the contents of the .xml this way:
{{Keyboard|content='''C:\>psarc.exe --xml="c:\psarctests\CREATE by_filelist.xml"'''}}

The output of the tool is the same in both cases (except the InputFile not present when using an xml)
{{Keyboard|content=
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
InputFile: C:\psarctests\source files\filelist.txt
Output: C:\psarctests\by_filelist.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test\dummy.txt
Archiving C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Archiving C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Archiving C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
Compressing TOC
Compressing C:\psarctests\source files\test\dummy.txt
Compressing C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Compressing C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Compressing C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png

           4: Total Files Archived
     6239520: Original Size
         108: Manifest (uncompressed)
          72: Manifest (compressed)
         380: TOC size
        8836: Final Size
        4.3%: Directory Overhead
       99.9%: Compression Ratio
           9: Compression Level
'''C:\>psarc.exe list C:\psarctests\by_filelist.psarc'''
Listing C:\psarctests\by_filelist.psarc
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (157/6142 2%)
}}

====create by file====
This method is the real deal, only available by using an xml, superceedes all the other creation methods and is the only method where is posible to use per-file attributes

The xml includes a list of files where every path of every file in the PC is specifyed (paths are the same than the filelist.txt explained before) but every file line allows for attributes

Note in the next example the compression attribute is enabled and affects all files, except Image3.png that has been archived without compression (appears as 100% in the list command output)

The other per-file attribute avoids the tool to output an error in the case the file dummy.txt is missing in the source folder

{{Boxcode|content=CREATE by_file.xml<syntaxhighlight lang="xml">
<psarc>
	<create archive="C:\psarctests\by_file.psarc" absolute="false" ignorecase="false">
		<compression type="zlib" enabled="true" />
		<strip regex="C:\psarctests\source files\test" />
		
		<file path="C:\psarctests\source files\test\dummy.txt" skipifmissing="true" />
		<file path="C:\psarctests\source files\test\BMPfolder1\Image1.bmp" />
		<file path="C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg" />
		<file path="C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png" compressed="false" />
	</create>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=
C:\>psarc.exe --xml="c:\psarctests\CREATE by_file.xml"
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
Output: C:\psarctests\by_file.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test\dummy.txt
Archiving C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Archiving C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
Archiving C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png
Compressing TOC
Compressing C:\psarctests\source files\test\dummy.txt
Compressing C:\psarctests\source files\test\BMPfolder1\Image1.bmp
Compressing C:\psarctests\source files\test\JPGfolder1\JPGfolder2\Image2.jpg
    Storing C:\psarctests\source files\test\PNGfolder1\PNGfolder2\PNGfolder3\Image3.png

           4: Total Files Archived
     6239520: Original Size
         108: Manifest (uncompressed)
          72: Manifest (compressed)
         380: TOC size
       14821: Final Size
        2.6%: Directory Overhead
       99.8%: Compression Ratio
           9: Compression Level
'''C:\>psarc.exe list C:\psarctests\by_file.psarc'''
Listing C:\psarctests\by_file.psarc
dummy.txt (0/0 100%)
BMPfolder1/Image1.bmp (8018/6220854 0%)
JPGfolder1/JPGfolder2/Image2.jpg (209/12524 1%)
PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142/6142 100%)
}}

Batch. This is an useless example to show how the .psarcs are created sequentially and how to create several .psarc's with only one .xml, it uses all default values for compressions, formats, flags etc...

In step 1 it creates an egg.psarc containing a dummy.txt. In step 2 it creates a chiken.psarc containing the egg.psarc made in step 1. In step 3 it creates an egg.psarc containing the chicken.psarc made in step 2 (egg.psarc created in step 3 overwrites egg.psarc made in step 1)

{{Boxcode|content=CREATE by_file_paradox<syntaxhighlight lang="xml">
<psarc>
	<create archive="C:\psarctests\egg.psarc">
		<strip regex="C:\psarctests\source files\test" />
		<file path="C:\psarctests\source files\test\dummy.txt" />
	</create>
	
	<create archive="C:\psarctests\chicken.psarc">
		<strip regex="C:\psarctests" />
		<file path="C:\psarctests\egg.psarc" />
	</create>
	
	<create archive="C:\psarctests\egg.psarc" overwrite="true">
		<strip regex="C:\psarctests" />
		<file path="C:\psarctests\chicken.psarc" />
	</create>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=
'''C:\>psarc.exe --xml="c:\psarctests\CREATE by_file_paradox.xml"'''
Strip: C:\psarctests\source files\test
Flags: relative
NumJobs: 2
Output: C:\psarctests\egg.psarc
Compression: zlib level 9
Archiving C:\psarctests\source files\test\dummy.txt
Compressing TOC
Compressing C:\psarctests\source files\test\dummy.txt

           1: Total Files Archived
           0: Original Size
           9: Manifest (uncompressed)
           9: Manifest (compressed)
          96: TOC size
         105: Final Size
       91.4%: Directory Overhead
       -1.$%: Compression Ratio
           9: Compression Level

Strip: C:\psarctests
Flags: relative
NumJobs: 2
Output: C:\psarctests\chicken.psarc
Compression: zlib level 9
Archiving C:\psarctests\egg.psarc
Compressing TOC
Compressing C:\psarctests\egg.psarc

           1: Total Files Archived
         105: Original Size
           9: Manifest (uncompressed)
           9: Manifest (compressed)
          96: TOC size
         174: Final Size
       55.2%: Directory Overhead
      -65.7%: Compression Ratio
           9: Compression Level

Strip: C:\psarctests
Flags: relative
NumJobs: 2
Output: C:\psarctests\egg.psarc
Compression: zlib level 9
Archiving C:\psarctests\chicken.psarc
Compressing TOC
Compressing C:\psarctests\chicken.psarc

           1: Total Files Archived
         174: Original Size
          13: Manifest (uncompressed)
          26: Manifest (compressed)
          96: TOC size
         252: Final Size
       38.1%: Directory Overhead
      -44.8%: Compression Ratio
           9: Compression Level
'''C:\>psarc.exe list C:\psarctests\egg.psarc
Listing C:\psarctests\egg.psarc
chicken.psarc (143/174 82%)
'''C:\>psarc.exe list C:\psarctests\chicken.psarc
Listing C:\psarctests\chicken.psarc
egg.psarc (69/105 65%)
}}

----

===extract===
* Extract contents of an existing archive.
*There are 3 optional available attributes for extract:
**'''--overwrite''' (if the files existed in the extraction folder they will be overwritten without advise)
**'''--strip-all''' (extracts all files in the root of the target folder, incase of several extracted files with the same name the program will return an error, this can be solved by using the command --overwrite)
**'''--skip-missing-files''' (seems pointless, mostly to extract files from malformed .psarcs or .psarcs that doesnt passes the "verify" command ?)

The required options are '''--input''' (the source .psarc) and '''--to''' (the target folder where contents will be extracted)

====extract all====
The example command extracts all files from the .psarc to a directory with full directory tree names, no skipped missing files, no overwrite

When using this options the command line output is the same, there is no mention of wich files are stripped, overwritten, or missing in the extraction process

{{Keyboard|content=
'''C:\>psarc.exe extract --input="C:\psarctests\source files\test.psarc" --to="C:\psarctests\test"'''
Extracting: dummy.txt (0 bytes)
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
Extracting: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Extracting: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
'''C:\>psarc.exe extract --overwrite --strip-all --skip-missing-files --input="C:\psarctests\source files\test.psarc" --to="C:\psarctests\test"'''
Extracting: dummy.txt (0 bytes)
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
Extracting: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Extracting: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
}}

'''extract all (xml)'''

{{Boxcode|content=EXTRACT all.xml<syntaxhighlight lang="xml">
<psarc>
	<extract archive="C:\psarctests\source files\test.psarc" to="C:\psarctests\all">
	</extract>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=
'''C:\>psarc.exe --xml="c:\psarctests\EXTRACT all.xml"'''
Extracting: dummy.txt (0 bytes)
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
Extracting: JPGfolder1/JPGfolder2/Image2.jpg (12524 bytes)
Extracting: PNGfolder1/PNGfolder2/PNGfolder3/Image3.png (6142 bytes)
}}

====extract by file====
This extraction method is only available when using an xml because command line doesnt allows to specify files inside the archive

{{Boxcode|content=EXTRACT by_file.xml<syntaxhighlight lang="xml">
<psarc>
	<extract archive="C:\psarctests\source files\test.psarc" to="C:\psarctests\by_file">
		<file archivepath="BMPfolder1/Image1.bmp" />
	</extract>
</psarc>
</syntaxhighlight>}}
{{Keyboard|content=
'''C:\>psarc.exe --xml="c:\psarctests\EXTRACT by_file.xml"'''
Extracting: BMPfolder1/Image1.bmp (6220854 bytes)
}}

When extracting single files is also posible to use the same attributes availables in command line, and attributes per-file, but they uses different names inside the xml (see the DTD example)
{{Boxcode|content=<syntaxhighlight lang="xml">
<psarc>
	<extract archive="C:\psarctests\source files\test.psarc" to="C:\psarctests\by_file" stripall="true" skipmissingfiles="false" overwrite="true">
		<file archivepath="dummy.txt" skipifmissing="true" />
		<file archivepath="PNGfolder1/PNGfolder2/PNGfolder3/Image3.png" />
	</extract>
</psarc>
</syntaxhighlight>}}

*Notes about the xml examples above:
**The element "extract" uses the attribute '''archive''' but could be replaced by '''input''', in this case are exactly the same and both will work, actually '''--input''' is the same option used in comand line but the examples in wiki uses the name '''archive''' because is more intuitive (is also used as an attribute for "create" and in both cases is refered to the compressed archive.psarc). Both (archive and input) appears in the DTD as optional (#IMPLIED) but only one of them can be used in the xml
**The element "file" uses the attribute '''archivepath''' but could be replaced by '''path''', in this case are exactly the same and both will work, but the examples in wiki uses the name '''archivepath''' because is more intuitive (is refered to the path of a file inside archive.psarc). Both (archivepath and path) appears in the DTD as optional (#IMPLIED) but only one of them can be used in the xml

==Total Commander plugin==
http://www.totalcmd.net/plugring/PSARC.html

==PS3 PSARC GUI==
It's a graphical user interface to view, extract or create psarc archives. GUI written by aldo, unknown psarc tool used internally

Download link: http://aldostools.org/ps3_psarc_gui.rar

=Rebuilding PSARC files=
When rebuilding a psarc is needed to preserve the original positions of all the files inside the archive (because every file in the original psarc has assigned an '''ID''' number, and after rebuilding this numbers must match with the original positions). for this same reason when rebuilding is not a good idea to remove files (because the other files that comes after will be displaced). When the purpose of the rebuild is to  reduce the size (by removing languages, etc...) the method consists in replacing them by dummies (0kb files), this dummies preserves the positions of all the files

This need to preserve the original positions of all the files inside the archive in the practise means there are only 2 methods to rebuild a psarc: "by filelist" or "by file". For both is needed to create a list of files

{{Boxframe1|content='''Rebuilding PSARC files, step-by-step summary'''
* Step 1 - Identify compression method, archive flags, and verify default structure sizes
* Step 2 - Identify if per-file compression was used <!-- and dupes --->
** Step 3a - If per-file compression was not used, rebuild with the method "by filelist" or "by file"
** Step 3a - If per-file compression was used, rebuild with the method "by file"
}}

'''Step 1'''

Is needed to look at the psarc header to identify some settings
 '''Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F'''
 00000000  50 53 41 52 00 01 00 04 <span style="background:#ffff66;">7A 6C 69 62</span> 00 01 23 BA  PSAR....<span style="background:#ffff66;">zlib</span>..#º
 00000010  <span style="background:#dd00dd;">00 00 00 1E</span> 00 00 09 16 <span style="background:#dddddd;">00 01 00 00</span> <span style="background:#d0000d;">00 00 00 03</span>  ................

Most important ones are the '''<span style="background:#ffff66;">compression method</span>''' (zlib/lzma) and the '''<span style="background:#d0000d;">archive flags</span>''' (relative/absolute, and ignorecase), this settings will be used when rebuilding from command line or from xml this way:
{{Boxcode|content=<syntaxhighlight lang="xml">
<psarc>
	<create archive="C:\psarctests\by_file.psarc" absolute="true" ignorecase="true">
		<compression type="zlib" />
		...
</syntaxhighlight>}}

The other values in the header that needs to be verifyed are the '''<span style="background:#dd00dd;">TOC entry size</span>''' and the '''<span style="background:#dddddd;">Block size</span>''', is needed to know if the original psarc we are trying to rebuild uses the default values (all i found used defaults), otherway is posible to use non-default values this way: <!-- not sure if is posible to change the "TOC entry size" -->
{{Boxcode|content=<syntaxhighlight lang="xml">
<psarc>
	<create archive="C:\psarctests\by_file.psarc" absolute="true" ignorecase="true" blocksize="65536">
		<compression type="zlib" />
		...
</syntaxhighlight>}}

'''Step2'''

Now is needed to know if the psarc uses per-file compression (if some of the files inside the archive ara compressed, and others are not compressed)

This is important to know wich rebuild method will be used in the next step, is needed to make a --list command with psarc tool and store the output of the command as a .txt

Open the .txt in a text editor (like notepad++) and search for the string '''100%''' (the files that appears with a 100% has been archived but are not compressed). Is needed to do it this way semi automatized because is usual to find psarc with thousand of files inside

*Check how many files are not compressed, his sizes, and file extensions
**If there are no files with 100% or if there are only a few and his sizes are minimal this is normal, it means the archive doesnt uses per-file compression
**If there some files with the 100%, normal sizes (not minimal), using the same file extension, and can be identifyed (like audio or video formats) then you have a psarc with per-file compression
**If all the files appears as 100% it means the psarc has been created with the compression attibute set as "false" this way:
{{Boxcode|content=<syntaxhighlight lang="xml">
<psarc>
	<create archive="C:\psarctests\by_file.psarc" absolute="true" ignorecase="true" blocksize="65536">
		<compression type="zlib" enabled="false" />
		...
</syntaxhighlight>}}

'''Step3'''

If the psarc doesnt uses per-file compression then is posible to rebuild it with the '''create by filelist''' method from command line by using an external filelist.txt

If the psarc uses per-file compression then the only way to rebuild it is with the '''create by file''' method by using an xml (the xml includes a list of files like the filelist.txt)

----

*Special rebuild notes:
**Mass effect 3 MAIN.PSARC contains a group of generic files compressed with level 9, and another group of .TXT, .BIN, and .BIK videos not compressed at all. In the creation options suggested above in the table the compression level is not defined and this means all them will use the default compression level 9 (so the .BIK files will have a ridiculous 1% or 2% of compression ratio because is the max they will admit). This is not how the original file was created (but works), the correct way to rebuild it is by defining specific compression levels "per file" in a predefined .xml
**Killzone 3 data_ps3.psarc (BCES01007 version) contains 8324 files (included 5.3GB of audio files for 21 languages with a compression of around 50%)... 2883 of all the files uses the same path/filenames repeated up to 3 times (because was created using 3 or more different working directories). This duplication of paths/filenames inside the .psarc in the practise means when doing a standard extraction 2833 files will be missing, overwrited, or they will give an error at extraction time, the correct way to mess with it is by doing several partiall extractions to different directories, and rebuild it by using a preconfigured .xml where the different paths for each file are specifyed, when rebuilding is also needed to use the --strip option several times to remove part of the paths from all the different working directories, this way the paths/filenames will be duplicated inside the .psarc archive (but are different files located at different positions and with a different ID number assigned).
**Ape Escape target.psarc includes "dupes" (or duplicated files) in the TOC (table of contents) of the psarc archive. This method used at creation time basically works by making several entries of the TOC to point to the same file, this way a single file inside the psarc is indexed several times in the TOC and can be accessed from several different paths/filenames. The only way to identify this dupes before extraction is by reading the TOC of the psarc for all the files and compare wich position are pointing to. As an example the original size of target.psarc is 328mb... after a "standard" extraction is 2.52GB (this extraction doesnt identify the dupes so are extracted several times under different paths/filenames)... if you try to rebuild it again his final size will be much bigger than the original target.psarc

==Generating a filelist.txt or xml by using regular expressions==

*The file paths inside filelist.txt or inside an automated.xml admits 2 formats:
**'''full PC paths''' (where the full PC file path included the device letter is used by psarc.exe to locate the file in any device and/or any folder). This method is the most flexible but needs an ''strip'' command to remove part of the PC path when creating the psarc archive
**'''relative to work directory paths''' (where work directory is the path to psarc.exe and the files needs to be placed in a subfolder under it). This method needs to copy psarc.exe to the parent folder of the files

To be sure all the files are in the correct positions can be used as a base file (to edit later) the output of the '''list''' command as explained before

This edition of the file generated by the '''list''' command can be automated completly (not needed to edit a single character by hand). Is posible to generate a '''filelist.txt''' or an '''automated.xml''' by replacing/erasing/adding characters with other programs that identifies and replaces characters by using regular expressions, the examples used here are commands for fnr.exe (find and replace tool) and contains regular expressions (to search) and a character string (to replace)

=Games or Apps using PSARC files=

{| class="wikitable"
! colspan="13" {{cellcolors|lightblue}} {{icon content ps3}}
|-
! colspan="2" | Game/App info !! colspan="5" | PSARC Header info !! rowspan="2" | Compression<BR />Method !! rowspan="2" | Notes
|-
! TITLE !! PSARC files || Version<BR />(offset 0x04) !! Compression<BR />(offset 0x08) !! TOC entry size<BR />(offset 0x10) !! Block Size<BR />(offset 0x18) !! Flags<BR />(offset 0x1C)
|-
| rowspan="3" | Ape Escape || sound.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000000 (no flags) || no compress || Contains not-compressed audio
|-
| <language>.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || 
|-
| target.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || TOC dupes!!!, see notes below
|-
| Atelier Rorona Plus || ? || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || ? || 
|-
| Eiyuu Densetsu Sen no Kiseki ||  data.psarc || ||  ||  ||  ||  ||  || 
|-
| Eiyuu Densetsu Sen no Kiseki II ||  data.psarc  || ||  ||  ||  ||  ||  || 
|-
| God of War III || All || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || 
|-
| rowspan="6" | God of War Ascension || INTROCIN.PSARC ||  ||  ||  ||  ||  || no compress || Intro video
|-
| CRTN.PSARC<BR />CYN.PSARC<BR />FURY.PSARC<BR />HECA.PSARC<BR />HRTN.PSARC<BR />LAN.PSARC<BR />PHI.PSARC<BR />STAT.PSARC<BR />STINT.PSARC<BR />TEM.PSARC ||  ||  ||  ||  ||  || per-file compress || Contains not-compressed audio, and other compressed files<BR />game levels, and game levels soundtracks
|-
| RESOURCES.PSARC ||  ||  ||  ||  ||  || per-file compress || Game resources, included not-compresed audio
|-
| <LANGUAGE>.PSARC ||  ||  ||  ||  ||  || per-file compress || Contains not-compressed audio, and other compressed files
|-
| SHELL.PSARC<BR />TPPS.PSARC ||  ||  ||  ||  ||  || compress all || Main menu<BR />Game updates stub (dummy file)
|-
| GAME.PSARC<BR />(or all others ?) || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || Game settings
|-
| ICO & Shadow of the Colossus HD ||  ||  ||  ||  ||  ||  ||  || 
|-
| Killzone 3 || data_ps3.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000001 (ignorecase) || compress all || created from 3 working directories, lot of duplicated paths
|-
| rowspan="3" | Mass Effect 3 || AUDIO.PSARC || 00010004 || lzma || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || no compress || Contains not-compressed audio
|-
| MAIN.PSARC || 00010004 || lzma || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed video, and other compressed files
|-
| TEXTURES.PSARC ||  ||  ||  ||  ||  ||  || 
|-
| Motorstorm Pacific Rift ||  ? || ||  ||  ||  ||  ||  ||  
|-
| Ni No Kuni || bd03.adat ?<BR />hd01.adat ?<BR />hd05<language>.adat ? || ||  ||  ||  ||  ||  || .psarc file extensions renamed to .adat
|-
| Ninja Gaiden 3 Razors Edge ||  || ||  ||  ||  ||  ||  || 
|-
| rowspan="2" | Ratchet & Clank. Tools of Destruction || *_uncached.psarc || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
|-
| All others || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all || 
|-
| rowspan="2" | Ratchet & Clank. Quest for Booty || *_uncached.psarc || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
|-
| All others || 00010002 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all || global_cached.psarc contains TOC dupes!!! (icon0.png)
|-
| rowspan="2" | Ratchet & Clank. A Crack in Time || *_uncached.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
|-
| All others || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all || 
|-
| rowspan="3" | Ratchet & Clank. Into the Nexus || global_cached.psarc<BR />level_cached.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed files, and other compressed files
|-
| global_uncached.psarc<BR />global_sound_**.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || per-file compress || Contains not-compressed audio, and other compressed files
|-
| All others || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all || 
|-
| The Last Of Us || All ? || 00010003 || zlib || 0000001E || 00010000 || 00000000 (no flags) ||  || 
|-
| The Shoot || All || 00010004 || zlib || 0000001E || 00010000 || 00000002 (absolute) ||  || 
|-
| Time and Eternity ||  || ||  ||  ||  ||  ||  || 
|-
| Uncharted 2 || All ? || 00010003 || zlib || 0000001E || 00010000 || 00000000 (no flags) ||  || 
|-
| Uncharted 3 || All || 00010003 || zlib || 0000001E || 00010000 || 00000000 (no flags) ||  || 
|-
| Warhawk || ? ||  ||  ||  ||  ||  ||  || 
|-
| rowspan="2" | White Knight Chronicles II || All .psarc || 00010003 || zlib || 0000001E || 00010000 || 00000002 (absolute) || no compress || Contains not-compressed audio
|-
| All .psarc.sdat || 00010003 || zlib || 0000001E || 00010000 || 00000002 (absolute) || compress all || Default compression, NPD signed psarcs
|-
| rowspan="2" | Wipeout HD Fury || data01.psarc || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || no compress || Contains not-compressed audio
|-
| All others || 00010003 || zlib || 0000001E || 00010000 || 00000003 (ignorecase + absolute) || compress all || 
|-
! colspan="13" {{cellcolors|lightblue}} {{icon content ps4}}
|-
! colspan="2" | Game/App info !! colspan="5" | PSARC Header info !! rowspan="2" | Compression<BR />Method !! rowspan="2" | Notes
|-
! TITLE !! PSARC files || Version<BR />(offset 0x04) !! Compression<BR />(offset 0x08) !! TOC entry size<BR />(offset 0x10) !! Block Size<BR />(offset 0x18) !! Flags<BR />(offset 0x1C)
|-
| VidZone || vidzone*.db.psarc || 00010004 || zlib || 0000001E || 00010000 || 00000000 (no flags) || compress all || Vidzone is a web service, the .psarc is hosted in the web
|}

*Other games that probably uses PSARC's
**Uncharted 1?
**Killzone colletion ?
**God of War. Collection ?
**other Motorstorms ?

{{File Formats}}
<noinclude>[[Category:Main]]</noinclude>