Editing Making Isolated SPU Modules and Loaders

=Introduction=

* E.g. to dump your ATA, ENCDEC or EID2 keys you have to make signed isolated SPU modules or loaders.
* This is a tutorial how to do it on Linux (it doesn't matter on PC or PS3).

=Tools=

* My Debian LiveCD has all tools you will need.
* See http://www.ps3devwiki.com/wiki/Debian_LiveCD

==SPU GCC Compiler==

* You need SPU GCC compiler to compile your code and create binary version of it.
* On PS3 Debian, just install spu toolchain.
* You can also cross-compile SPU GCC toolchain for your Linux PC.
* See http://gitorious.ps3dev.net/ps3linux/powerpc64-cross-compiler if you want to build SPU GCC cross-compiler. Just change in HOWTO target option from powerpc64-linux to spu-elf.

==ps3tools==

* You need these tools to decrypt PS3 isolated SPU modules and loaders.
* You also need it to sign and encrypt your own SPU modules and loaders.
* '''self_rebuilder doesn't work properly with isolated SPU modules or loaders. Therefore, i made a new tool which works with isolated SPU modules and loaders. It's called iso_rebuilder and is a modified version of self_rebuilder.'''
* See my GIT repop: http://gitorious.ps3dev.net/ps3otheros/ps3tools

=How To Test Isolated SPU Modules and Loaders=

* I test my isolated SPU modules and loaders with PS3 Linux and spuisofs/spuldrfs Virtual File Systems.

==spuisofs==

* You can test with spuisofs isolated SPU modules which are decrypted by isoldr.
* You cannot test loaders with spuisofs.
* But spuisofs has the advantage that it's alot easier to execute isolated SPUs with it than with spuldrfs.

See http://www.ps3devwiki.com/wiki/Spuisofs

==spuldrfs==

* You can test with spuldrfs isolated SPU modules which are decrypted by isoldr and loaders which are decrypted by metldr.
* Use spuisofs if you want to execute isoldr SPUs, it's easier to do than with spuldrfs.

See http://www.ps3devwiki.com/wiki/Spuldrfs

=Example: Making dump_ata_keys.self=

* First you need '''sb_iso_spu_module.self''' from your NOR/NAND flash or from PS3 update file.

{{Keyboard|content=<syntaxhighlight lang="bash">
# compile your SPU code

spu-elf-gcc -c dump_ata_keys.S

ls -l dump_ata_keys.o

# convert your code to binary

spu-elf-objcopy -O binary dump_ata_keys.o dump_ata_keys.bin

ls -l dump_ata_keys.bin

# decrypt sb_iso_spu_module.self

unself sb_iso_spu_module.self sb_iso_spu_module.elf

ls -l sb_iso_spu_module.elf
mv sb_iso_spu_module.elf dump_ata_keys.elf

# print program header of decrypted SPU module

readelf -l dump_ata_keys.elf

Elf file type is EXEC (Executable file)
Entry point 0x880
There are 3 program headers, starting at offset 52

Program Headers:
  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align
  LOAD           0x000100 0x00000880 0x00000880 0x05040 0x05040 R E 0x80
  LOAD           0x005180 0x00005900 0x00005900 0x00030 0x001c0 RW  0x80
  NOTE           0x0051b0 0x00000000 0x00000000 0x00034 0x00000 R   0x10

 Section to Segment mapping:
  Segment Sections...
   00     .unknown .unknown 
   01     .unknown .unknown .unknown .unknown 
   02     .unknown 

# entry point is 0x880 which is in first program segment at file offset 0x100

# now we kill all old code and data with 0s before we put our code there.
# seek parameter is the offset of the first program segment.
# count parameter is the sum of the offset of the last program segment plus its size and
# minus the offset of the first program segmnet.

# killing old code and data with 0s is a good idea because 0x00000000 means stop opcode.

dd if=/dev/zero of=dump_ata_keys.elf bs=1 seek=$((0x100)) count=$((0x51b0 + 0x34 - 0x100)) conv=notrunc

# after you filled out the SPU module with 0s, check it with spu-objdump

spu-elf-objdump -d dump_ata_keys.elf 

dump_ata_keys.elf:     file format elf32-spu


Disassembly of section :

00000880 <>:
	...

# now we copy our code to SPU module
# seek parameter is the entry point offset in file

dd if=dump_ata_keys.bin of=dump_ata_keys.elf bs=1 seek=$((0x100)) conv=notrunc

# now build isolated SPU module

iso_rebuilder dump_ata_keys.elf dump_ata_keys.self sb_iso_spu_module.self

# we are done :)
# time to test it with spuisofs !!!

# mount spuisofs (we do it of course on PS3 Linux and not on PC)
# you could use my Debian LiveCD e.g. which has all tools you need

sudo mount -t spuisofs none /mnt

ls -l /mnt
total 0
-rw-rw-rw- 1 root root 1048576 Sep  7 12:12 app
-rw-rw-rw- 1 root root 1048576 Sep  7 12:12 arg1
-rw-rw-rw- 1 root root 1048576 Sep  7 12:12 arg2
--w--w--w- 1 root root       0 Sep  7 12:12 cont
-r--r--r-- 1 root root       0 Sep  7 12:12 info
-rw-rw-rw- 1 root root  262144 Sep  7 12:12 ls
-rw-rw-rw- 1 root root  131072 Sep  7 12:12 priv2
-rw-rw-rw- 1 root root  131072 Sep  7 12:12 problem
--w--w--w- 1 root root      24 Sep  7 12:12 run
-r--r--r-- 1 root root    4096 Sep  7 12:12 shadow

# compile dump_ata_keys application

tar xvzf dump_ata_keys.tar.gz
cd dump_ata_keys
make
ls -l dump_ata_keys

./dump_ata_keys
usage: ./dump_ata_keys <self path> <eid4 path>

# NOTE: you don't really need eid4 to run the application or to dump your ATA keys

./dump_ata_keys ./dump_ata_keys.self ./eid4
spuisofs found at /mnt
arg1 kernel virtual address d000000003375000
shadow: spe_execution_status 7
priv2: puint_mb_R 2
shadow: spe_execution_status b
problem: spu_status_R 6660082

# here is important to check the stop code which is 0x666 :)
# my dump_ata_keys.S code stops with stop code 0x666 when it's done
# this way you can be really sure that your dump_ata_keys.self was correctly signed,
# encrypted and accepted by isoldr

# dump your ATA keys

hexdump -C /mnt/arg1
</syntaxhighlight>}}
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br />

=Example: Making dump_encdec_keys.self=

* First you need '''lv1ldr''' from your NOR/NAND flash or from PS3 update file.

{{Keyboard|content=<syntaxhighlight lang="bash">
# compile your SPU code

spu-elf-gcc -c dump_encdec_keys.S

ls -l dump_encdec_keys.o

# convert your code to binary

spu-elf-objcopy -O binary dump_encdec_keys.o dump_encdec_keys.bin

ls -l dump_encdec_keys.bin

# decrypt lv1ldr

unself lv1ldr lv1ldr.elf

ls -l lv1ldr.elf
mv lv1ldr.elf dump_encdec_keys.elf

# print program header of decrypted SPU module
glevand@debian:~$ readelf -l dump_encdec_keys.elf

Elf file type is EXEC (Executable file)
Entry point 0x12c00
There are 3 program headers, starting at offset 52

Program Headers:
  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align
  LOAD           0x000080 0x00000800 0x00000800 0x00000 0x0cd20 RW  0x80
  LOAD           0x000100 0x00012c00 0x00012c00 0x1ca00 0x1ca00 R E 0x80
  LOAD           0x01cb00 0x0002f600 0x0002f600 0x004f0 0x004f0 RW  0x80

 Section to Segment mapping:
  Segment Sections...
   00     .unknown
   01     .unknown .unknown
   02     .unknown .unknown .unknown 

# entry point is 0x12c00 which is in first program segment at file offset 0x100

# now we kill all old code and data with 0s before we put our code there.
# seek parameter is the offset of the first program segment.
# count parameter is the sum of the offset of the last program segment plus its size and
# minus the offset of the first program segmnet.

# killing old code and data with 0s is a good idea because 0x00000000 means stop opcode.

dd if=/dev/zero of=dump_encdec_keys.elf bs=1 seek=$((0x100)) count=$((0x1cb00 + 0x4f0 - 0x100)) conv=notrunc

# after you filled out the SPU module with 0s, check it with spu-objdump

spu-elf-objdump -d dump_encdec_keys.elf 

dump_encdec_keys.elf:     file format elf32-spu


Disassembly of section :

00012c00 <>:
        ...

# now we copy our code to SPU module
# seek parameter is the entry point offset in file

dd if=dump_encdec_keys.bin of=dump_encdec_keys.elf bs=1 seek=$((0x100)) conv=notrunc

# now build isolated SPU module

iso_rebuilder dump_encdec_keys.elf dump_encdec_keys.self lv1ldr

# we are done :)
# time to test it with spuldrfs !!!

# mount spuldrfs (we do it of course on PS3 Linux and not on PC)
# you could use my Debian LiveCD e.g. which has all tools you need

sudo mount -t spuldrfs none /mnt

ls -l /mnt
total 0
-rw-rw-rw- 1 root root 1048576 Sep  7 13:20 buf1
-rw-rw-rw- 1 root root 1048576 Sep  7 13:20 buf2
-rw-rw-rw- 1 root root 1048576 Sep  7 13:20 buf3
-r--r--r-- 1 root root       0 Sep  7 13:20 info
-rw-rw-rw- 1 root root 1048576 Sep  7 13:20 ldr
-rw-rw-rw- 1 root root  262144 Sep  7 13:20 ls
-rw-rw-rw- 1 root root 1048576 Sep  7 13:20 metldr
-rw-rw-rw- 1 root root  131072 Sep  7 13:20 priv2
-rw-rw-rw- 1 root root  131072 Sep  7 13:20 problem
--w--w--w- 1 root root       0 Sep  7 13:20 run
-r--r--r-- 1 root root    4096 Sep  7 13:20 shadow

# compile dump_encdec_keys application

tar xvzf dump_encdec_keys.tar.gz
cd dump_encdec_keys
make
ls -l dump_encdec_keys

./dump_encdec_keys
usage: ./dump_encdec_keys <metldr path> <ldr path>

# NOTE: you will need your metldr

./dump_encdec_keys ./metldr ./dump_encdec_keys.self
spuldrfs found at /mnt
buf1 kernel virtual address d000000003c48000
buf2 kernel virtual address d000000003d49000
priv2: puint_mb_R 1
problem: pu_mb_R 1
priv2: puint_mb_R 666
problem: spu_status_R 6660082

# here is important to check the stop code which is 0x666 :)
# my dump_encdec_keys.S code stops with stop code 0x666 when it's done
# this way you can be really sure that your dump_encdec_keys.self was correctly signed,
# encrypted and accepted by metldr

# dump your ENCDEC keys

hexdump -C /mnt/buf2
</syntaxhighlight>}}
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<br /><br /><br />