Editing Hardware Flashers:testpoints layout 4

[[Category:Hardware]]
= NOR Consoles =
Used in the second, third and fourth revisions of the slim model PS3 ([[CECH-21xx|CECH-21xx]]/[[SUR-00x|SUR-001]], [[CECH-25xx|CECH-25xx]]/[[JTP-00x|JTP-001]] or [[JSD-00x|JSD-001]], [[CECH-30xx|CECH-30xx]]/[[KTE-00x|KTE-001]])

== NOR Wiring - layout 4 ==
Flashers for NOR based consoles ([[CECHHxx|CECHH]]/[[DIA-00x|DIA-001]] and later) are generaly wired to the testpoints between [[South Bridge]] and [[NOR]]), plus (when needed) ground and Vcc.

[[CECH-21xx|CECH-21xx]]/[[SUR-00x|SUR-001]], [[CECH-25xx|CECH-25xx]]/[[JTP-00x|JTP-001]] or [[JSD-00x|JSD-001]], [[CECH-30xx|CECH-30xx]]/[[KTE-00x|KTE-001]] all have the same layout 4 of testpoints.

=== TriState on NOR consoles ===
{{TriState}}

=== NOR Pinout table ===
{{NOR-Flashertable}}

== Structure ==
Only a single 16MB NOR flash chip is used. The 128N is JEDEC CFI compliant and organized as 8,388,608 words or 16,777,216 bytes, addressable as 16-bit words (PS3 modus operandi) and 8-bit / 1 byte when the BYTE# signal is logic zero.


{{Hardware Flashers}}

[[Category:Hardware Flashers]]