Editing E3

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
{{Wikify}}
[[Category:Hardware]][[Category:Software]]
 
Files @ http://www.ps3devwiki.com/files/flash/Tools/E3/
Files @ https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/Tools/E3/
== E3 Flasher ==
== E3 Flasher ==
=== Where to get it ===
==== Official listed on E3 site ====
* World Wide forums
UK http://www.uk-j-b-s.co.uk/
** http://www.e3forums.net/.
* Asia
** China
*** http://olygame.taobao.com/
*** http://www.shopclues.com/
* North America
** USA / Canada
*** http:///www.modchipcentral.com/
*** http://www.modchipsdirect.com/
*** http://www.digitopz.com/
* South America
** Brazil
*** http://www.playtronics.com.br/
*** http://www.ps2modchip.com.br/
* Europe
** France
*** http://www.arcalide.com/
*** http://www.siliteo.fr/
*** http://www.logic-sunrise.com/
*** http://www.foxchip.com/
** Germany
*** http://www.chipskonsolen.de/
** United Kingdom
** http://www.uk-j-b-s.co.uk/
*** http://www.modchip.org/
* Australia
*** http://www.modchipsaustralia.com/
*** http://www.ozmodchips.com/
* Russia
*** http://www.magicdevice.ru/
==== Other ====
* World Wide
** http://a liexpress.com/
* Australia
** http://www.betterwayelectronics.com/
* The Netherlands
** http://www.consolepro.nl/
* Germany
** http://www.console24.com/
=== Picture Guide ===
=== Picture Guide ===
<Gallery>
<Gallery>
Line 68: Line 21:


=== Update E3 Flasher ===
=== Update E3 Flasher ===
1. Use blank micro SD card and copy the [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/Tools/E3/BIN/2011.10.28%20E3%20Flasher%20Samsung%20Update_Multi_consoles/update.bin update.bin] or [http://www.mediafire.com/download/k1guzuhu2jdsdbz/update.bin Samsung Update: Multi Consoles] file on to the root of it.
1. Use blank micro SD card and copy the [http://www.ps3devwiki.com/files/flash/Tools/E3/BIN/2011.10.28%20E3%20Flasher%20Samsung%20Update_Multi_consoles/update.bin update.bin] or [http://www.mirrorcreator.com/files/VMUFY332/update.bin_links Samsung Update: Multi Consoles] file on it. Place the micro SD card into the E3 flasher and flip up all switches except 1 & 2.<br />
It is recommended to use the Samsung Update. Remember to check its MD5 before writing it to the E3.
2. Turn the console on and the install will begin automatically. The LED's on the indicator will progressively reach 100% (Once finished they will flash alternatively). <br />
[https://www.google.com/search?q=8D1A10F45049B5DC1223D6008ED238DD 8D1A10F45049B5DC1223D6008ED238DD]
3. Turn off the console and flip down all of the switches.
2, Place the micro SD card into the E3 flasher and flip up all switches except 1 & 2.<br />
3. Turn the console on and the install will begin automatically. The LED's on the indicator will progressively reach 100% (Once finished they will flash alternatively). <br />
4. Turn off the console and flip down all of the switches.


=== Make a NOR backup ===
=== Make a NOR backup ===
1. Place a blank micro SD card into the E3. Flip all switches down except the 3rd (Backup). Turn on the console. Once the HD light has stopped flashing, press START on the E3 and wait until the LED's on the indicator have reached 100% (Once finished they will flash alternatively).  
1. Place a blank micro SD card into the E3. Flip all switches down except the 3rd (Backup). Turn on the console. Once the HD light has stopped flashing, press START on the E3 and wait until the LED's on the indicator have reached 100% (Once finished they will flash alternatively).  


2. Remove the bkpps3.bin from the SD card and [http://www.psdevwiki.com/ps3/Validating_flash_dumps validate] it before doing anything else with it. Once you have done that, back it up again and compare MD5 to ensure that your clip is stable enough for the downgrade process.
2. Remove the bkpps3.bin from the SD card and [http://www.ps3devwiki.com/wiki/Validating_flash_dumps Validate] it before doing anything else with it.
 
<div style="float:right">[[File:Clamp.jpg|250px|thumb|left|Drastic but effective method.]]</div>
 
'''Getting errors?'''


If you get a 10000101, 10000100, 10001100, 10001101 [http://www.ps3devwiki.com/wiki/E3#Error_Codes Error] then you need to reseat or apply pressure to the E3's clip and try again.
If you get a 10000101, 10000100, 10001100, 10001101 [http://www.ps3devwiki.com/wiki/E3#Error_Codes Error] then you need to reseat or apply pressure to the E3's clip and try again.
When you initially clip onto a fresh board it will 100% make a clicking sound when it is fully attached. This does not guarantee it will work, but its a good indicator.
Generally you should get the E3 clip and put it on an angle (45 degrees) next to the NOR (so you can see the clip's pins), align that with the pins on the NOR chip and drop it down like a lid.
Regarding pressure, it all depends on how many times you have tried to clip it. The more you clip onto the NOR the weaker its pins get, it will no longer make that click sound and it won't stay on its own.
If you are after a permanent install you should put some foam or something squeezable on top of the NOR chip (roughly 2-3cm tall that can compress to 1-1.5cm) and reassemble the PS3 (Which causes pressure on the NOR). If you do not care for a permanent install try using a clamp, clip or vice as seen in this [https://www.psdevwiki.com/ps3/File:gECpD.jpg image].
Once you have got a successful read you shouldn't start assuming its error free. Check the dump you have and if it appears valid you should not be touching your clip again (to prevent any bricking when downgrading).


=== Checking the NOR backup for errors ===
=== Checking the NOR backup for errors ===
Line 106: Line 44:
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|-
|-
! style="background-color:red!important;" | <span style="background-color:lightred; color:white; font-size:100%; ">Warning</span>
! style="background-color:red;" | <span style="background-color:lightred; color:white; font-size:200%; ">Warning</span>
|-
|-
| <span style="white; color:red!important; font-size:100%; text-align:center; ">[[E3 Nor dump checker|This tool is known and proven to give false positives on bad dumps that lead to permabricks.]]
| style="background-color:white;" | <span style="white; color:red; font-size:150%; text-align:center; ">This tool is known and proven to give false positives on bad dumps that lead to permabricks.  


Use this method: [[Validating flash dumps]] to make sure the dumps are in crisp condition.
Use this method: [[Validating flash dumps]] to make sure the dumps are in crisp condition.
Line 116: Line 54:
|-
|-
|}
|}
[http://www.multiupload.com/RV3PN9GVTA E3 Nor Dump Checker V1.0.exe (521.7 KB)] <br />
Article: http://www.ps3hax.net/2011/11/released-e3-nor-dump-checker-v1-0-released-tested/
===== Quick bulletproof test =====
does not test:
* bootldr (corrupted binary not detected)
* metldr (corrupted binary not detected)
* bootldr size (both under- and oversize not detected)
* metldr size (both under- and oversize not detected)
* cISD (didn't catch brick-byte error)
* cCSD (didn't catch brick-byte error)
* trvk_prg0 (didn't catch brick-byte error)
* trvk_prg1 (didn't catch brick-byte error)
* trvk_pkg0 (didn't catch brick-byte error)
* trvk_pkg1 (didn't catch brick-byte error)
* eEID (didn't catch brick-byte error)
* cvtrm (didn't catch brick-byte error)
* CELL_EXTNOR_AREA (didn't catch brick-byte error)
partly test:
* ROS0 (but didn't catch brick-byte error)
* ROS1 (but didn't catch brick-byte error)
does test:
* headerprefix ("00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00")
* header ("00 00 00 00 AC 0F FF E0 00 00 00 00 AD DE EF BE")
* header ("FI.I")
* headersuffix "(FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF")
* filetable ("saceru_eoldare.." etc.)
Conclusion : '''USELESS''', brickdumps will still show as 'valid'. <br />
'''[[Recommendation: use]]<span style="white; color:red;"> [http://www.ps3devwiki.com/files/flash/Tools/Flowrebuilder/ Flowrebuilder] instead and common sense like mentioned on [[Hardware_flashing#Generic_Warning|Hardware flashing]] page.'''
====== Added 22 nov 2011 ======
  ''New E3 flasher update released, it will backup bios 3 times automatically.
  We suggest user verify those bios with E3 Nor dump checker, to assure the backup bios is no erro.''
'''[[Conclusion:]]<span style="white; color:red;"> Anyone with a flasher (should) know that you can dump it 1 to 1000's times the same bad. Comparing CRC/MD5/SHA1 is not any secure way to validate flash (as mentioned on [[Hardware_flashing#Generic_Warning|Hardware flashing]]). Letting the dumper do it x times, only gives endusers/customers a false sense of reassurance, always a bad idea.'''


=== Downgrade ===
=== Downgrade ===
==== Normal E3 Downgrade Process ====
==== Normal E3 Downgrade Process ====


1. Place the [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/Tools/E3/BIN/e3downgrade%20to%20TF%20%20v1.2/e3_downgrade.bin e3_downgrade.bin] and the bkpps3.bin you made on a micro SD Card.  
1. Place the [http://www.ps3devwiki.com/files/flash/Tools/E3/BIN/e3downgrade%20to%20TF%20%20v1.2/e3_downgrade.bin e3_downgrade.bin] and the bkpps3.bin you made on a micro SD Card.  


2. Flip all switches down, except the last one (Lock/Unlock). Turn the PS3 on. While in the XMB press START on the flasher and the programming process will begin. The LED's on the indicator will progressively reach 100% (Once finished they will flash alternatively). From this point you have the option to check the log which is saved on the MircoSD which will tell you if the writing process was successful or not - this may or may not be a valid indicator.
2. Flip all switches down, except the last one (Lock/Unlock). Turn the PS3 on. While in the XMB press START on the flasher and the programming process will begin. The LED's on the indicator will progressively reach 100% (Once finished they will flash alternatively).
   
   
3. Power off the console completely (with the switch on the rear or by unplugging it). Flip down the Lock/Unlock switch. Turn on the console and you should see the 'Connect controller using a USB cable' screen. If the console just booted back into the XMB you need to [http://www.ps3devwiki.com/wiki/E3#Manual_Downgrade_Process_.28Recommended.29 manually] patch the backup. Turn it back off again.
3. Switch off the console from the back using the switch provided with the E3 kit. Flip down the Lock/Unlock switch. Turn on the console and you should see the 'Connect controller using a USB cable' screen. If the console just booted back into the XMB you need to manually patch the backup.


From this point on, follow [[Downgrading_with_Hardware_flasher#Reinstall_firmware_in_Factory_Service_Mode|the main guide starting from ''Reinstall firmware in Factory Service Mode'']]
4. Place your USB downgrade jig in the port closest to the flasher (furthest to the right). Quickly press the power and eject button. If successful (depending on your dongle) it will flash or flash green and the console should power off automatically (If not repeat the process but faster).
 
5. Copy [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE1/Lv2diag.self Lv2diag.self (File1)] & [http://www.tortuga-cove.com/forums/viewtopic.php?f=127&t=525 Rogero CEX-3.55 CFW V3.7] onto a USB. Place the USB in the same port you used for the downgrade jig. Turn on the console and the downgrade process should begin automatically (You can tell by the HD and USB light flickering). Once the install is finished the console will turn off automatically (Check the log on the USB to confirm it was successful).
 
6. Copy the [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE2/Lv2diag.self Lv2diag.self (File2)] onto the USB (Replacing the first Lv2diag.self). Place the USB in the same port you used in the last process. Switch on the console and it should switch off automatically after a few seconds.
 
7. Power the console back on and you should see the connect the controller screen. Now follow the on-screen instructions until you reach the XMB.
 
8. [http://www.ps3devwiki.com/wiki/Downgrading_with_Hardware_flasher#Dehashing Dehash] the console and or install/set [http://www.ps3devwiki.com/wiki/QA_Flagging QA Flag/Toggle] to prevent bricking when changing firmware.


==== Manual Downgrade Process (Recommended) ====
==== Manual Downgrade Process (Recommended) ====


1. Patch your bkpps3.bin with [http://www.betterwayelectronics.com/files/BwE_NOR-NAND_Patcher.rar BwE NOR/NAND Patcher] or patch it manually (Do not accidentally patch the byte-reversed version after validating). Once that's done, place it by itself on a micro SD Card.  
1. Patch your bkpps3.bin with [http://www.mediafire.com/?a250qvc3c88bcka Rogero's PS3 Nor Dump Patcher v0.01] or patch it manually. Once that's done, place it by itself on a micro SD Card.
 
3. Flip all switches down, except the last one (Lock/Unlock). Turn the PS3 on. While in the XMB press START on the flasher and the programming process will begin. The LED's on the indicator will progressively reach 100% (Once finished they will flash alternatively).
 
4. Switch off the console from the back using the switch provided with the E3 kit. Flip down the Lock/Unlock switch and place your USB downgrade jig in the port closest to the flasher (furthest to the right).
 
5. Quickly press the power and eject button. If successful (depending on your dongle) it will flash or flash green and the console should power off automatically (If not repeat the process but faster).
 
6. Copy [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE1/Lv2diag.self Lv2diag.self (File1)] & [http://www.tortuga-cove.com/forums/viewtopic.php?f=127&t=525 Rogero CEX-3.55 CFW V3.7] onto a USB. Place the USB in the same port you used for the downgrade jig. Turn on the console and the downgrade process should begin automatically (You can tell by the HD and USB light flickering). Once the install is finished the console will turn off automatically (Check the log on the USB to confirm it was successful).
 
7. Copy the [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE2/Lv2diag.self Lv2diag.self (File2)] onto the USB (Replacing the first Lv2diag.self). Place the USB in the same port you used in the last process. Switch on the console and it should switch off automatically after a few seconds.
 
8. Power the console back on and you should see the connect the controller screen. Now follow the on-screen instructions until you reach the XMB.
 
9. [http://www.ps3devwiki.com/wiki/Downgrading_with_Hardware_flasher#Dehashing Dehash] the console and or install/set [http://www.ps3devwiki.com/wiki/QA_Flagging QA Flag/Toggle] to prevent bricking when changing firmware.


2. Flip all switches down. Turn the PS3 on. While in the XMB press START on the flasher and the programming process will begin. The LED's on the indicator will progressively reach 100% (Once finished they will flash alternatively). From this point you have the option to check the log which is saved on the MircoSD which will tell you if the writing process was successful or not - this may or may not be a valid indicator.
==== Flash Fun Downgrade Process (Highly Recommended) ====


From this point on, follow [[Downgrading_with_Hardware_flasher#Reinstall_firmware_in_Factory_Service_Mode|the main guide starting from ''Reinstall firmware in Factory Service Mode'']]
Requires soldering! See also [http://www.ps3devwiki.com/files/flash/Tools/E3/Manuals/E3%20FLASHER%20repair%20method%20if%20console%20bricked/English-E3%20FLASHER%20repair%20method%20if%20console%20bricked.pdf E3's official PDF on repairing a bricked console]


==== Flash Fun Downgrade Process (Highly Recommended) - also for Debricking ====
1. Solder the [http://www.ps3devwiki.com/wiki/Hardware_flashing#Tristate Tristate] of the PS3 to the SBE pad on the E3's ribbon.


Requires soldering! See also [find E3's official PDF on repairing a bricked console]
2. Patch your bkpps3.bin with [http://www.mediafire.com/?a250qvc3c88bcka Rogero's PS3 Nor Dump Patcher v0.01] or patch it manually. Once that's done, place it by itself on a micro SD Card.


1. Solder the [[Hardware_flashing#Tristate|Tristate]] of the PS3 to the SBE pad on the E3's ribbon.
3. Flip all switches down, except the first one (Flash Fun). Turn the PS3 on. If you get a 1101111 error the Tristate is not on correctly. When PS3 is powered on, press the START button on the PS3 and wait for the LED's on the indicator to reach 100% (Once finished they will flash alternatively).


2. Patch your bkpps3.bin with [http://www.betterwayelectronics.com/files/BwE_NOR-NAND_Patcher.rar BwE NOR/NAND Patcher] or patch it manually (Do not accidentally patch the byte-reversed version after validating). Once that's done, place it by itself on a micro SD Card.  
4. Switch off the console from the back using the switch provided with the E3 kit. Flip down the Flash Fun switch and place your USB downgrade jig in the port closest to the flasher (furthest to the right).


3. Flip all switches down, except the first one (Flash Fun). Turn the PS3 on (If you get a 1101111 error the [[Hardware_flashing#Tristate|Tristate]] is not on correctly). When PS3 is powered on, press the START button on the E3 and wait for the LED's on the indicator to reach 100% (Once finished they will flash alternatively). From this point you have the option to check the log which is saved on the MicroSD which will tell you if the writing process was successful or not - this may or may not be a valid indicator.
5. Quickly press the power and eject button. If successful (depending on your dongle) it will flash or flash green and the console should power off automatically (If not repeat the process but faster). If the console gives you a YLOD, check the Tristate and Flash Fun switch.


4. Flip all switches down and from this point on, follow [[Downgrading_with_Hardware_flasher#Reinstall_firmware_in_Factory_Service_Mode|the main guide starting from ''Reinstall firmware in Factory Service Mode'']]
6. Copy [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE1/Lv2diag.self Lv2diag.self (File1)] & [http://www.tortuga-cove.com/forums/viewtopic.php?f=127&t=525 Rogero CEX-3.55 CFW V3.7] onto a USB. Place the USB in the same port you used for the downgrade jig. Turn on the console and the downgrade process should begin automatically (You can tell by the HD and USB light flickering). Once the install is finished the console will turn off automatically (Check the log on the USB to confirm it was successful).


(Note: When debricking from 4.x MFW, patch at step 2 used is noFSM and at step 4 the MFW 4.x firmware is reinstalled using [[Recovery Menu]], not Factory Service Mode)
7. Copy the [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE2/Lv2diag.self Lv2diag.self (File2)] onto the USB (Replacing the first Lv2diag.self). Place the USB in the same port you used in the last process. Switch on the console and it should switch off automatically after a few seconds.  


==== How To Patch Your Dump Manually ====
8. Power the console back on and you should see the connect the controller screen. Now follow the on-screen instructions until you reach the XMB.
E3 dumps are byte reversed, and so must our patches (otherwise we have to reverse, paste the v2 in the REV, reverse back again - using byte reversed patches shortcuts that 'reversing confusion')
 
9. [http://www.ps3devwiki.com/wiki/Downgrading_with_Hardware_flasher#Dehashing Dehash] the console and or install/set [http://www.ps3devwiki.com/wiki/QA_Flagging QA Flag/Toggle] to prevent bricking when changing firmware.
 
==== Manual E3 downgrade v2 ====
E3 dumps are byte reversed, and so must our patches (otherwise we have to reverse, paste the v2 in the REV, reverse back again - using byte reversed patches shortcuts that 'reversing confusion' :P)  


Dump the flash with the E3, you will end up with a .bin file (e.g. bkpps3.bin)
Dump the flash with the E3, you will end up with a .bin file (e.g. bkpps3.bin)


===== Patches to insert for v2 downgrade =====
<div style="float:right">[[File:Flowrebuilder-E3-autopatcher.png|200px|thumb|left|Flowrebuilder : E3 autopatcher]]</div>
<div style="float:right">[[File:Flowrebuilder-E3-autopatcher.png|200px|thumb|left|Flowrebuilder : E3 autopatcher]]</div>


https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/E3%20downgrade/
http://www.ps3devwiki.com/files/flash/patches/E3%20downgrade/


{|class="wikitable sortable"
{|class="wikitable sortable"
Line 163: Line 169:
! target area !! patch no. !! NOR Offset !! Paste length !! Remarks
! target area !! patch no. !! NOR Offset !! Paste length !! Remarks
|-
|-
| ROS0 || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/E3%20downgrade/patch1-0C0010-7C0010.REV patch1.REV (7 MB)] [https://www.mirrorcreator.com/files/05TZUU2P/patch1-0C0010-7C0010.REV_links] || 0x0C0010 || 0x6FFFE0 || version string 3.55
| ROS0 || [http://www.ps3devwiki.com/files/flash/patches/E3%20downgrade/patch1-0C0010-7C0010.REV patch1.REV (7 MB)] || 0x0C0010 || 0x6FFFE0 || version string 3.55
|-
|-
| ROS1 || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/E3%20downgrade/patch1-0C0010-7C0010.REV patch1.REV (7 MB)] [https://www.mirrorcreator.com/files/05TZUU2P/patch1-0C0010-7C0010.REV_links] || 0x7C0010 || 0x6FFFE0 || same as patch1.REV
| ROS1 || [http://www.ps3devwiki.com/files/flash/patches/E3%20downgrade/patch1-0C0010-7C0010.REV patch1.REV (7 MB)] || 0x7C0010 || 0x6FFFE0 || same as patch1.REV
|-
|-
| trvk_prg0 (0x40000) <br />trvk_prg1 (0x60000)<br />trvk_pkg0 (0x80000) <br />trvk_pkg1 (0xA0000) || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/E3%20downgrade/rvk-040000.REV rvk-040000.REV (512 KB)]  [https://www.mirrorcreator.com/files/0RJ8J4Q5/rvk-040000.REV_links] || 0x40000 || 0x80000 || one big patch<br />overlapping several area's
| trvk_prg0 (0x40000) <br />trvk_prg1 (0x60000)<br />trvk_pkg0 (0x80000) <br />trvk_pkg1 (0xA0000) || [http://www.ps3devwiki.com/files/flash/patches/E3%20downgrade/rvk-040000.REV rvk-040000.REV (512 KB)] || 0x40000 || 0x80000 || one big patch<br />overlapping several area's
|-
|-
|}(above patches in a single package + autopatcher file: [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/E3%20downgrade.rar E3%20downgrade.rar] [https://www.mirrorcreator.com/files/3Z1ZFTG3/E3_downgrade.rar_links])  
|}(above patches in a single package + autopatcher file: [http://www.ps3devwiki.com/files/flash/patches/E3%20downgrade.rar E3%20downgrade.rar])  


Using autopatcher from Flow Rebuilder:
Using autopatcher from Flow Rebuilder:
Line 176: Line 182:
* Select as Patch file: E3-downgrader\progskeet_patch.txt
* Select as Patch file: E3-downgrader\progskeet_patch.txt


Use the <abbr title="bkpps3.patch.bin">patched file</abbr>, rename to bkpps3.bin, put on SD and use E3 to flash the ps3.  
Use the <abbr title="bkpps3.patch.bin">patched file</abbr>, rename to bkpps3.bin, put on SD and use E3 to flash the ps3. Afterwards, use [http://www.ps3devwiki.com/wiki/Downgrading_with_Hardware_flasher#PUP_to_use (prepatched downgrader PUP)] - or use the TCL from the talk/discussion page to patch one yourself) and reinstall the firmware in service mode like any V2 downgrade.
 
Note: If you wish to extract an E3 dump: Flowrebuilder can bytereverse and extract the NOR dump for you.
 
To flash a manually patched backup put all the switches on the flasher down and press start while in the XMB
To flash a manually patched backup put all the switches on the flasher down and press start while in the XMB


From this point on, follow [[Downgrading_with_Hardware_flasher#Reinstall_firmware_in_Factory_Service_Mode|the main guide starting from ''Reinstall firmware in Factory Service Mode'']]
=== E3 De-bricking ===
 
The console can be bricked with installing unpatched firmware (In case syscon has 3.56+ hashes, you need prepatched LV1) or misusing the E3.<br />
Generally de-bricking is similar/same as the Flash Fun method of downgrading however this uses the original/valid dump (not patched).
Note: You can also de-brick with the Flash Fun downgrade method.
 
* Solder a wire from the SBE pad on the E3's ribbon to the [http://www.ps3devwiki.com/wiki/Hardware_flashing#Tristate Tristate] (NORpoint on PS3 motherboard).
* Place your original/valid dump (Non-patched) on SD/TF card. Make sure your PS3's HD is plugged in.
* Flip all of the switches down on the E3 except Flash Fun.
* Turn on console and press START on the E3 to begin the restore (progress LEDs will light up one by one and blink if successfully). If the console does not power on or the E3 gives you the 11001111 error, check your Tristate cable.
* Power off the console from behind (using E3's switch) and put all switches on the E3 down.
* Turn the PS3 back on! If everything went fine, it will now be de-bricked.
 
[http://www.mediafire.com/download.php?k8v7a60tjah64i2 E3's official PDF on de-bricking]
 
==== User experiences ====
From my experience soldering a wire to the NOR Tristate point did nothing, try this method instead. Manually patch your nor backup. Place the patched backup and the e3_downgrade.bin file onto the SD card then put all the switches on the flasher down and hold start and turn on the console. If the console stays on and the flashing process begins when completed after rebooting the console should boot normally on the firmware you were trying to install, if you see two blue flashing lights and the console just turns off  try this.. all switches down except the 6th one (lock/unlock) hold start on the flasher and turn on the console providing that the console stays on once finished flashing '''DO NOT TURN THE CONSOLE OFF''' instead put the last switch down and press start again. once finished reboot and hopefully the console should be back to life.
 
Edit: Soldering SBE to the Nor Tristate is important, so your PS3 will stay "on" in Flash Fun Mode even when bricked


== Error Codes ==
== Error Codes ==
Line 189: Line 216:
  number 1 stands for LED Blinking
  number 1 stands for LED Blinking
  number 0 stands for LED OFF
  number 0 stands for LED OFF
NOTE:
Once you press START for any writing setting, the first thing the E3 will do is erase the NOR.
Any errors AFTER pressing START will result in the NOR being half erased.
Do not power off the PS3 - Apply pressure to the clip and hit START again - Repeat process until the lights begin to progress.




Line 201: Line 222:
! colspan="8" | Error Codes !! Meaning !! Remarks  
! colspan="8" | Error Codes !! Meaning !! Remarks  
|-
|-
<!--//
| 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0 ||  
| 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0 ||  
|-
|-
Line 330: Line 350:
| 0 || 0 || 1 || 1 || 1 || 1 || 1 || 1 ||  
| 0 || 0 || 1 || 1 || 1 || 1 || 1 || 1 ||  
|-
|-
//-->
| 0 || 1 || 0 || 0 || 0 || 0 || 0 || 0 || Failed to initialize TF card || SD card not seated properly
| 0 || 1 || 0 || 0 || 0 || 0 || 0 || 0 || Failed to initialize TF card || SD card not seated properly / Can't open bkpps3.bin
 
|-
|-
<!--//
| 0 || 1 || 0 || 0 || 0 || 0 || 0 || 1 ||  
| 0 || 1 || 0 || 0 || 0 || 0 || 0 || 1 ||  
|-
|-
Line 341: Line 358:
| 0 || 1 || 0 || 0 || 0 || 0 || 1 || 1 ||  
| 0 || 1 || 0 || 0 || 0 || 0 || 1 || 1 ||  
|-
|-
//-->
| 0 || 1 || 0 || 0 || 0 || 1 || 0 || 0 || Failed to read files in TF card || SD card not seated properly
| 0 || 1 || 0 || 0 || 0 || 1 || 0 || 0 || Failed to read files in TF card || SD card not seated properly / Can't find bkpps3.bin (Check its file name)
|-
|-
<!--//
| 0 || 1 || 0 || 0 || 0 || 1 || 0 || 1 ||  
| 0 || 1 || 0 || 0 || 0 || 1 || 0 || 1 ||  
|-
|-
Line 351: Line 366:
| 0 || 1 || 0 || 0 || 0 || 1 || 1 || 1 ||  
| 0 || 1 || 0 || 0 || 0 || 1 || 1 || 1 ||  
|-
|-
//-->
| 0 || 1 || 0 || 0 || 1 || 0 || 0 || 0 || Failed to open TF card || SD card not seated properly
| 0 || 1 || 0 || 0 || 1 || 0 || 0 || 0 || Failed to open TF card || SD card not seated properly / Can't find bkpps3.bin (Check its file name), or... cannot find e3_downgrade.bin (Flip switch #6 'Lock / Unlock')
|-
|-
<!--//
| 0 || 1 || 0 || 0 || 1 || 0 || 0 || 1 ||  
| 0 || 1 || 0 || 0 || 1 || 0 || 0 || 1 ||  
|-
|-
Line 361: Line 374:
| 0 || 1 || 0 || 0 || 1 || 0 || 1 || 1 ||  
| 0 || 1 || 0 || 0 || 1 || 0 || 1 || 1 ||  
|-
|-
//-->
| 0 || 1 || 0 || 0 || 1 || 1 || 0 || 0 || Failed to write files to TF card || SD card not seated properly
| 0 || 1 || 0 || 0 || 1 || 1 || 0 || 0 || Failed to write files to TF card || SD card not seated properly
|-
|-
<!--//
| 0 || 1 || 0 || 0 || 1 || 1 || 0 || 1 ||  
| 0 || 1 || 0 || 0 || 1 || 1 || 0 || 1 ||  
|-
|-
Line 475: Line 486:
| 1 || 0 || 0 || 0 || 0 || 0 || 1 || 1 ||  
| 1 || 0 || 0 || 0 || 0 || 0 || 1 || 1 ||  
|-
|-
//-->
| 1 || 0 || 0 || 0 || 0 || 1 || 0 || 0 || Failed to initialize NOR in E3 || Check pads / clip at E3 board check may not be properly seated
| 1 || 0 || 0 || 0 || 0 || 1 || 0 || 0 || Failed to initialize NOR in E3 || Check E3 Linker Pads / Reattach ribbon on E3 - It is not on properly.
|-
|-
| 1 || 0 || 0 || 0 || 0 || 1 || 0 || 1 || Failed to read NOR in E3 || Check E3 Linker Pads / Reattach ribbon on E3 - It is not on properly.
| 1 || 0 || 0 || 0 || 0 || 1 || 0 || 1 || Failed to read NOR in E3 || Check pads / clip at E3 board check may not be properly seated
|-
|-
| 1 || 0 || 0 || 0 || 0 || 1 || 1 || 0 || Failed to erase NOR in E3 || Check E3 Linker Pads / Reattach ribbon on E3 - It is not on properly.
| 1 || 0 || 0 || 0 || 0 || 1 || 1 || 0 || Failed to erase NOR in E3 || Check pads / clip at E3 board check may not be properly seated
|-
|-
| 1 || 0 || 0 || 0 || 0 || 1 || 1 || 1 || Failed to write NOR in E3 || Check E3 Linker Pads / Reattach ribbon on E3 - It is not on properly.
| 1 || 0 || 0 || 0 || 0 || 1 || 1 || 1 || Failed to write NOR in E3 || Check pads / clip at E3 board check may not be properly seated
|-
|-
<!--//
| 1 || 0 || 0 || 0 || 1 || 0 || 0 || 0 ||  
| 1 || 0 || 0 || 0 || 1 || 0 || 0 || 0 ||  
|-
|-
Line 493: Line 502:
| 1 || 0 || 0 || 0 || 1 || 0 || 1 || 1 ||  
| 1 || 0 || 0 || 0 || 1 || 0 || 1 || 1 ||  
|-
|-
//-->
| 1 || 0 || 0 || 0 || 1 || 1 || 0 || 0 || Failed to initialize PS3 BIOS || Check pads / clip at PS3 board check may not be properly seated
| 1 || 0 || 0 || 0 || 1 || 1 || 0 || 0 || Failed to initialize PS3 BIOS || Check E3 Linker Pads / Reattach or apply pressure to clip on PS3 / Reattach ribbon on E3 - It is not on properly.
|-
|-
| 1 || 0 || 0 || 0 || 1 || 1 || 0 || 1 || Failed to read PS3 BIOS || Check E3 Linker Pads / Reattach or apply pressure to clip on PS3 - It is not on properly.
| 1 || 0 || 0 || 0 || 1 || 1 || 0 || 1 || Failed to read PS3 BIOS || Check pads / clip at PS3 board check may not be properly seated
|-
|-
| 1 || 0 || 0 || 0 || 1 || 1 || 1 || 0 || Failed to erase PS3 BIOS || Check E3 Linker Pads / Reattach or apply pressure to clip on PS3 - It is not on properly.
| 1 || 0 || 0 || 0 || 1 || 1 || 1 || 0 || Failed to erase PS3 BIOS || Check pads / clip at PS3 board check may not be properly seated
|-
|-
| 1 || 0 || 0 || 0 || 1 || 1 || 1 || 1 || Failed to write/erase PS3 BIOS || Check E3 Linker Pads / Reattach or apply pressure to clip on PS3 - It is not on properly.
| 1 || 0 || 0 || 0 || 1 || 1 || 1 || 1 || Failed to write PS3 BIOS || Check pads / clip at PS3 board check may not be properly seated
|-
|-
<!--//
| 1 || 0 || 0 || 1 || 0 || 0 || 0 || 0 ||  
| 1 || 0 || 0 || 1 || 0 || 0 || 0 || 0 ||  
|-
|-
Line 607: Line 614:
| 1 || 0 || 1 || 1 || 1 || 1 || 1 || 1 ||  
| 1 || 0 || 1 || 1 || 1 || 1 || 1 || 1 ||  
|-
|-
//-->
| 1 || 1 || 0 || 0 || 0 || 0 || 0 || 0 || Wrong settings of switches || Check toggle switch - wrong setting
| 1 || 1 || 0 || 0 || 0 || 0 || 0 || 0 || Wrong settings of switches || Check toggle switch - wrong setting
|-
|-
<!--//
| 1 || 1 || 0 || 0 || 0 || 0 || 0 || 1 ||  
| 1 || 1 || 0 || 0 || 0 || 0 || 0 || 1 ||  
|-
|-
//-->
| 1 || 1 || 0 || 0 || 0 || 0 || 1 || 0 || PS3 is operating NOR, E3 Flasher cannot operate at the same time || Check toggle switch - wrong setting
| 1 || 1 || 0 || 0 || 0 || 0 || 1 || 0 || PS3 is operating NOR, E3 Flasher cannot operate at the same time || Check toggle switch - wrong setting / Reattach ribbon on E3
|-
|-
<!--//
| 1 || 1 || 0 || 0 || 0 || 0 || 1 || 1 ||  
| 1 || 1 || 0 || 0 || 0 || 0 || 1 || 1 ||  
|-
|-
//-->
| 1 || 1 || 0 || 0 || 0 || 1 || 0 || 0 || Not the right PS3 for this backup || Already used e3flasher on 1 console
| 1 || 1 || 0 || 0 || 0 || 1 || 0 || 0 || Not the right PS3 for this backup || Already used e3flasher on 1 console
|-
|-
<!--//
| 1 || 1 || 0 || 0 || 0 || 1 || 0 || 1 ||  
| 1 || 1 || 0 || 0 || 0 || 1 || 0 || 1 ||  
|-
|-
Line 629: Line 630:
| 1 || 1 || 0 || 0 || 0 || 1 || 1 || 1 ||  
| 1 || 1 || 0 || 0 || 0 || 1 || 1 || 1 ||  
|-
|-
//-->
| 1 || 1 || 0 || 0 || 1 || 0 || 0 || 0 || Wrong PS3 version, not supported at present || Metldr.2 model undowngradable
| 1 || 1 || 0 || 0 || 1 || 0 || 0 || 0 || Wrong PS3 version, not supported at present || Metldr.2 model undowngradable
|-
|-
<!--//
| 1 || 1 || 0 || 0 || 1 || 0 || 0 || 1 ||  
| 1 || 1 || 0 || 0 || 1 || 0 || 0 || 1 ||  
|-
|-
Line 641: Line 640:
| 1 || 1 || 0 || 0 || 1 || 0 || 1 || 1 ||  
| 1 || 1 || 0 || 0 || 1 || 0 || 1 || 1 ||  
|-
|-
//-->
| 1 || 1 || 0 || 0 || 1 || 1 || 0 || 0 || Wrong function settings || Check toggle switch - wrong setting
| 1 || 1 || 0 || 0 || 1 || 1 || 0 || 0 || Wrong function settings || Check toggle switch - wrong setting
|-
|-
<!--//
| 1 || 1 || 0 || 0 || 1 || 1 || 0 || 1 ||  
| 1 || 1 || 0 || 0 || 1 || 1 || 0 || 1 ||  
|-
|-
| 1 || 1 || 0 || 0 || 1 || 1 || 1 || 0 ||  
| 1 || 1 || 0 || 0 || 1 || 1 || 1 || 0 ||  
|-
|-
//-->
| 1 || 1 || 0 || 0 || 1 || 1 || 1 || 1 || Missing [http://www.ps3devwiki.com/wiki/Hardware_flashing#Tristate Tristate] || Check SBE (Tristate) connection on ribbon
| 1 || 1 || 0 || 0 || 1 || 1 || 1 || 1 || Missing [[Hardware_flashing#Tristate|Tristate]] || Check SBE ([[Hardware_flashing#Tristate|Tristate]]) connection on ribbon
|-
|-
<!--//
| 1 || 1 || 0 || 1 || 0 || 0 || 0 || 0 ||  
| 1 || 1 || 0 || 1 || 0 || 0 || 0 || 0 ||  
|-
|-
Line 749: Line 744:
| 1 || 1 || 1 || 1 || 1 || 1 || 1 || 1 ||  
| 1 || 1 || 1 || 1 || 1 || 1 || 1 || 1 ||  
|-
|-
//-->
|}
|}


Line 763: Line 757:
<span style="text-decoration: underline;">'''solution''':</span>  
<span style="text-decoration: underline;">'''solution''':</span>  
* check solder points (resolder)  
* check solder points (resolder)  
* refit the Nor Clip by smoothing it down with a little screwdriver / sandpaper   
* Fat PS3 only: refit the Nor Clip by smoothing it down with a little screwdriver / sandpaper   
* clean contacts on Nor and E3 Clip with Isopropylalkohol 70% -
* clean contacts on Nor and E3 Clip with Isopropylalkohol 70% -
* use pads or cardboard to press down Nor clip     
* use pads or cardboard to press down Nor clip     
* solder using '''E3 linker''' (best permanent solution)
* solder using '''E3 linker''' (best permanent solution)
- you can find the right pinouts for your board on the [[Hardware_flashing#Connecting_NOR_pads_to_flasher|Hardware flashing]] page
- you can find the right pinout for your board in the progskeet diagramms
                                                                                               
 
- OE (Prog) > NOE (E3);
 
- GP0 > CE;
 
- WE > NWE;
 
- RDY (RY/BY) NW/AIT;
 
- GP1 > Reset;
 
- 3.3V VCC > VCC and BVCC                                                                                                           


[[File:E3.jpg]]  
[[File:E3.jpg]]  
Line 809: Line 814:
* 11000000 - Wrong position of switches (the action you selected is not possible)
* 11000000 - Wrong position of switches (the action you selected is not possible)
* 11001100 - Wrong position of switches (the action you selected is not possible)
* 11001100 - Wrong position of switches (the action you selected is not possible)
* 11000010 - PS3 is using NOR / you cant use E3 Flasher at the same time / SDcard bad
* 11000010 - PS3 is using NOR / you cant use E3 Flasher at the same time


<span style="text-decoration: underline;">'''solution''':</span>  
<span style="text-decoration: underline;">'''solution''':</span>  
Line 817: Line 822:


=== Problem state 5 ===
=== Problem state 5 ===
* 11001000 - Wrong PS3 Version / Not supported PS3 Version (Metldr2 or nonrecognised metldr)
* 11001000 - Wrong PS3 Version / Not supported PS3 Version (Nand / Metldr2)


<span style="text-decoration: underline;">'''Solution''':</span>  
<span style="text-decoration: underline;">'''Solution''':</span>  
* Reclip
* Buy a progskeet for nand :)


=== Problem state 6 ===
=== Problem state 6 ===
* 11000100 - corrupt backup of PS3 data
* 11000100 - corrupt backup of PS3 data
* 11000100 - Not the right PS3 for this backup


<span style="text-decoration: underline;">'''Solution''':</span>  
<span style="text-decoration: underline;">'''Solution''':</span>  
* check backup for errors (flowrebuilder etc) / make a new clean dump
* check backup for errors (flowrebuilder etc) / make a new clean dump
* User already used e3flasher on 1 console and did not update E3 itself with multiconsole update.bin on [http://www.ps3devwiki.com/wiki/E3#Update_E3_Flasher top of this page].


=== Problem other frequent problems and solutions ===
=== Problem other frequent problems and solutions ===
Line 838: Line 841:


====Blackscreen with no hdd activity and only hard reset possible (no brick)====
====Blackscreen with no hdd activity and only hard reset possible (no brick)====
* remove clip and try again
* try getting into FSM with a faster power/eject combo
* if you manually patched, check if you did not patch the byte-reversed copy
* attempt flashfun downgrade
* resolder SBCE -> A / cut A/B properly
* resolder SBCE -> A / cut A/B properly
* restrip contacts on the backside of the E3 Flasher (they must not touch the metal casing) they have to be isolated very good .. they are very sensitive and cause a lot of errors
* restrip contacts on the backside of the E3 Flasher (they must not touch the metal casing) they have to be isolated very good .. they are very sensitive and cause a lot of errors
Line 850: Line 849:
* if using TBv2 please note, that instead of proper security they used loops to protect their product; try reinstalling the FW via recovery mode
* if using TBv2 please note, that instead of proper security they used loops to protect their product; try reinstalling the FW via recovery mode
* also dont use custom boot logos with TBv2 !!
* also dont use custom boot logos with TBv2 !!
* Reinstall a downgrader prepatched FW
* Reinstall KMEAW based "no-check" MFW via recovery mode, as Kmeaw based LV2 seems to have better compatibility with the with Lv1 no-check patches(Thx Rogero!)


* if you have no success with the methods from above solder Tri/SBE and reflash a valid backup via flash fun mode (100000)
* if you have no success with the methods from above solder Tri/SBE and reflash a valid backup via flash fun mode (100000)
Note: I installed the E3 on a 3.55 Cfw Ps3 and took a backup (3.55 dump) .. Then i updated to 4.11 took another backup (4.11 dump) and bricked later .. Reflashing the clean 4.11 backup(which was made long before the brick)resulted in the same black screen again .. also flashing a patched 4.11 dump ended in blackscreen .. 
But flashing the 3.55 dump (after flashing the patched 4.11 backup) did the trick and fixed the black screen problem .. After reformating the HDD i was back on 3.55 even though i was on 4.11 before ..


====ylod behavior (3 beeps and turns off)====
====ylod behavior (3 beeps and turns off)====
Line 864: Line 866:
:b)Brickfix:  
:b)Brickfix:  
::well done .. you bricked your PS3 :)<br />
::well done .. you bricked your PS3 :)<br />
::Solder SBE to [[Hardware_flashing#Tristate|Tristate]] ..  use Flash Fun Mode (10000000) to reflash the valid back up of the firmware revision you bricked on ..  
::Solder SBE to Tristate ..  use Flash Fun Mode (10000000) to reflash the valid back up of the firmware revision you bricked on ..  


====TrueBlue Dongle not working with dualboot (only red light)====
====TrueBlue Dongle not working with dualboot (only red light)====
Line 878: Line 880:
The E3 flat cable has to lead away from the flasher NOT in the direction of the flasher ..
The E3 flat cable has to lead away from the flasher NOT in the direction of the flasher ..


====Dualboot error: MFW HDD corrupted====
====Dualboot error: CFW HDD corrupted====
After updating your OFW HDD to a higher firmware your MFW HDD gets an error message and needs to be updated too   
After updating your OFW HDD to a higher firmware your CFW HDD gets an error message and needs to be updated too   


'''<span style="text-decoration: underline;">Solution</span>'''  
'''<span style="text-decoration: underline;">Solution</span>'''  
Line 908: Line 910:
== E3 - Coverboard - switches ==
== E3 - Coverboard - switches ==
<div style="float:right">[[File:E3 - Coverboard - switches.jpg|200px|thumb|left|E3 - Coverboard - switches]]</div>
<div style="float:right">[[File:E3 - Coverboard - switches.jpg|200px|thumb|left|E3 - Coverboard - switches]]</div>
<div style="height:150px; overflow:auto">
{| class="wikitable sortable"
{| class="wikitable sortable"
|-
|-
Line 1,042: Line 1,043:
|-
|-
|}
|}
</div>


== Picture Gallery ==
== Picture Gallery ==
<Gallery>
<Gallery>
File:E3_Clips_-_Brown_%26_Black_Clip_Comparison.jpg| Brown & Black Clip Comparison
File:CLIP comparison.jpg| 360Clip and E3-Clip comparison  
File:CLIP comparison.jpg| 360Clip and E3-Clip comparison  
File:CLIP styles.jpg| Clip Styles
File:CLIP styles.jpg| Clip Styles
Line 1,071: Line 1,070:
File:E3-img0004xv.jpg| E3 Flasher - TOP
File:E3-img0004xv.jpg| E3 Flasher - TOP
File:E3Linker-installed.jpg| E3Linker installed
File:E3Linker-installed.jpg| E3Linker installed
File:Nor_damage.jpg|Damaged NOR. The pins are bent to the shape of the opposing pins on the E3 clip.
File:Nor damage 2.jpg|Above view of damaged NOR.
File:Guide.jpg|Alternate ways of powering & using E3
File:58250 521245854563253 488755509 n.jpg|E3 powered by USB reading itself
</Gallery>
</Gallery>
==== E3 Flasher SD Card Adapter Mod BY LOU@Y (Boloul98) ====
<gallery>
File:Pinout-diagram BY [email protected]|thumb|left|Pinout-diagram BY [email protected]
File:20190326 230549.jpg|thumb|center|Another Pinout-Diagram BY [email protected]
File:20190326 230549(2).jpg|thumb|center|Another Pinout with a clean soldered Tin in the SD Card Adapter
File:20190326 225646.jpg|thumb|center|1
File:20190326 225650.jpg|thumb|center|2
File:20190326 225712.jpg|thumb|center|3
File:20190326 225714.jpg|thumb|center|4
File:20190326 225731.jpg|thumb|center|5
File:20190326 225828.jpg|thumb|center|6
File:20190326 225838.jpg|thumb|center|7
File:20190326 225847.jpg|thumb|center|8
File:20190326 225851.jpg|thumb|center|9
File:20190326 225857.jpg|thumb|center|10
File:20190326 225915.jpg|thumb|center|11
File:20190326 225950.jpg|thumb|center|12
File:20190326 225956.jpg|thumb|center|13
File:20190326 230024.jpg|thumb|center|14
File:20190326 230100.jpg|thumb|center|15
File:20190326 230124.jpg|thumb|center|16
File:20190326 230516.jpg|thumb|center|17
File:20190326 230526.jpg|thumb|center|18
File:20190326 230849.jpg|thumb|center|19
File:20190326 230856.jpg|thumb|center|20
File:E3 flasher-back.jpg|thumb|center|21
File:20190326 230037.jpg|thumb|center|22
File:184FBB40-5D0F-482C-BE0E-EDFA7D07A7BB.png|thumb|center|SD Card Adapter with soldered contact for wires
File:94626222-9EC4-4D09-9D0D-2F2E42ED71CE.png|thumb|center|SD Card Adapter 2nd photo
File:E2ADB235-87B7-488F-9353-6BA5B6F52B02.png|thumb|center|SD Adapter without Solder Tin / SD Adapter with Solder Tin
File:9D365C58-C04B-41A0-A35D-0F9629E23904.png|thumb|center|Two SD Card Adapter preparing for the mod ,that first time i try to solder 2nd SD Adapter in the tiny pins of the MicroSD Slot
File:20190326 232009.jpg|thumb|center|Hardawre Flashers
File:20190326 232434.jpg|thumb|center|Hardware Flashers Setup NAND/NOR
</gallery>
🟊 This is a digram for anyone who face problem with the MicroSD Slot and no need to solder to the tiny pins in the Slot,
    just soldering directly to the motherboard and keep your MicroSD Slot clean :)
- Youtube Video Part 1 tested with a Good front panel :
- Youtube Video Part 2 tested with my front panel that have no MicroSD Slot :
- Last Video showing how i check the dump extracted from PS3 to SD Card in the Adapter (Dump Checked using PS3DumpChecker 495) :


== External references ==
== External references ==
Line 1,125: Line 1,079:
* [http://www.ps3-infos.fr/forum/tutoriaux-f44/e3-flasher-install-downgrade-ps3-config-half-et-fast-dual-boot-t2649.html E3 Installation (French)]
* [http://www.ps3-infos.fr/forum/tutoriaux-f44/e3-flasher-install-downgrade-ps3-config-half-et-fast-dual-boot-t2649.html E3 Installation (French)]
* [http://www.ps3-addict.fr/forum/debrikage-ps3-ylodee-par-flasher-fixed-t5092.html Debricking with E3 (French)]
* [http://www.ps3-addict.fr/forum/debrikage-ps3-ylodee-par-flasher-fixed-t5092.html Debricking with E3 (French)]
{{Hardware Flashers}}<noinclude>[[Category:Main]]</noinclude>
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page:

Retrieved from "http://www.psdevwiki.com/ps3/E3"