Editing Downgrading with Hardware flasher

<div style="float:right">[[File:NAND-downgrading-steps.png|200px|thumb|left|NAND flasher downgrader steps]]<br />[[File:NOR-downgrading-steps.png|200px|thumb|left|NOR flasher downgrader steps]]<br />[[File:Downgrading-installation-steps.png|200px|thumb|left|Downgrading installation steps ]]</div>

== Dump ==
Connect your [[Hardware flashing]] device and '''[[Validating_flash_dumps|make sure you are getting 100% correct, valid, verified dumps]].'''
	 
== Checking console capability of running 3.55 ==
Compare the values found in your dump with those in the [[Downgrading_with_Hardware_flasher#metldr.2Bbootldr_sizes|'''metldr+bootldr sizes''']] table
	
If not having a dump, use the [[Talk:Playstation_Update_Package_(PUP)#Using_fake_upgrade_to_get_lowest_firmware_version_info|MinVer PUP method]]
	 
'''Note:'''
: The mention of minimal version praxis on several other wikipages is only a rough indication.
: The two most accurate ways are to look at the actual dump and the [[Talk:Playstation_Update_Package_(PUP)#Using_fake_upgrade_to_get_lowest_firmware_version_info|MinVer PUP method]] itself, instead of flying blind on [[SKU_Models#Retail_Models|SKU tables]] and [[SKU_Models#Datecode_.2F_Manufacturing_Date|datecodes]]
	 
=== metldr+bootldr sizes ===
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" 
|- bgcolor="#cccccc"
! [[IDPS]] !! rowspan="2" | [[SKU_Models#Datecode_.2F_Manufacturing_Date|SKU - Datecode / Manufacturing date]] !! colspan="2" | [[Flash#asecure_loader_region|metldr offset]] !! colspan="2" | bootldr offset !! rowspan="2" | Notes
|-
! <small>0x2F077&nbsp;(NOR)<br />0x80877&nbsp;(NAND)</small> !! <small>0x81E&nbsp;(NOR)<br />0x4081E&nbsp;(NAND)</small> !! <small>0x842&nbsp;(NOR)<br />0x40842&nbsp;(NAND)</small> !! <small>0xFC0002&nbsp;(NOR)<br />0x0&nbsp;(NAND)</small> !! <small>0xFC0012&nbsp;(NOR)<br />0x12&nbsp;(NAND)</small>
|-
| style="text-align:center;" | 01 || CECHA01 (COK-001) with 1.00&nbsp;from&nbsp;factory || style="text-align:center;" | ED A0 || style="text-align:center;" | 0E D6 || style="text-align:center;" | - || style="text-align:center;" | - || <!--//zecoxao: CECHA01 (COK-001) with 1.00 from factory - datecode unknown//-->incomplete dump
|-
| style="text-align:center;" | 01 || CECHA06 (COK-001) || style="text-align:center;" | EE 10 || style="text-align:center;" | 0E DD || style="text-align:center;" | 2A 3F || style="text-align:center;" | 2A 3F || <!--//bluemimmo: NAND FAT//--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 02 || CECHB (COK-001) || style="text-align:center;" | - || style="text-align:center;" | - || style="text-align:center;" | - || style="text-align:center;" | - || <span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 03 || CECHC04 (COK-002) with 1.00&nbsp;from&nbsp;factory || style="text-align:center;" | EB F0 || style="text-align:center;" | 0E BB || style="text-align:center;" | 30 44 || style="text-align:center;" | 30 44 || <!--//euss: NAND FAT//--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 04 || CECHE (COK-002) || style="text-align:center;" | - || style="text-align:center;" | - || style="text-align:center;" | - || style="text-align:center;" | - || <span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 05 || CECHG (SEM-001) || style="text-align:center;" | - || style="text-align:center;" | - || style="text-align:center;" | - || style="text-align:center;" | - || <span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" |  ||  || style="text-align:center;" | E7 B0 || style="text-align:center;" | 0E 77 || style="text-align:center;" | 2E 8C || style="text-align:center;" | 2E 8C || <!--//john__: NAND FAT SEM-001//-->unsure if valid dump
|-
| style="text-align:center;" | 06 || CECHH04 (DIA-001) || style="text-align:center;" | E8 E0 || style="text-align:center;" | 0E 8A || style="text-align:center;" | 2E F4 || style="text-align:center;" | 2E F4 || <!--//akex: CECHH04 DIA-001 with Spansion S29GL128N90TFIR2 //--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 07 || CECHJ (DIA-002) || style="text-align:center;" | EA 60 || style="text-align:center;" | 0E A2 || style="text-align:center;" | 2E E3 || style="text-align:center;" | 2E E3 || <!--//cechj 40gb / chipps3ve: DIA-002 with Spansion //--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 08 || CECHL (VER-001) || style="text-align:center;" | E8 D0 || style="text-align:center;" | 0E 89 || style="text-align:center;" | 2E AB || style="text-align:center;" | 2E AB || <!--//Abkarino, anger, defyboy, ir0nman//--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 08 ||  || style="text-align:center;" | E8 D0 || style="text-align:center;" | 0E 89 || style="text-align:center;" | 2E B3 || style="text-align:center;" | 2E B3 || <!--//Dado, ir0nman//--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 08<br />09 || CECHL (VER-001) with 2.30 from factory - datecode unknown<br />CECH20.. (DYN-001) || style="text-align:center;" | E8 90 || style="text-align:center;" | 0E 85 || style="text-align:center;" | 2F 13 || style="text-align:center;" | 2F 13 || <!--//Val, Freeplex, Abkarino:CECHL04-VER001 //--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 03<br />0A<br />0B || CECHE04 (COK-002W) refurbished <br />CECH-210.A/B (SUR-001)?<br />CECH-2504B (JTP-001) with 3.40 from factory - datecode 0C || style="text-align:center;" | E9 20 || style="text-align:center;" | 0E 8E || style="text-align:center;" | 2F 4B || style="text-align:center;" | 2F 4B || <!--//domelec, ogy, Ir0nman, nice69, Marcocanc, sandugas:CECH-2504B (unknow mobo) with 3.40 from factory - datecode 0C, avati:(COK-002W) //--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 0B || CECH-250.B (JTP-001) with 3.56 from factory - <span style="color:#30C030; background-color:#FFFFFF; ">datecode 1A</span> || style="text-align:center;" | E9 60 || style="text-align:center;" | 0E 92 || style="text-align:center;" | 2F 53 || style="text-align:center;" | 2F 53 || <!--//Freemagne, ciariello, aftab//--><span style="color:#30C030; background-color:#FFFFFF; ">OK</span>
|-
| style="text-align:center;" | 0B || CECH2504A (JTP-001) with <span style="color:#F06060; background-color:#FFFFFF; ">3.56&nbsp;from&nbsp;factory</span> - <span style="color:#F06060; background-color:#FFFFFF; ">datecode&nbsp;1B</span> || style="text-align:center;" | E9 60 || style="text-align:center;" | 0E 92 || style="text-align:center;" | 2F 5B || style="text-align:center;" | 2F 5B || <!--//bluemmimo, cech-2501a-jtp-001-1b, raymanvtw(RLOD+poweroff when try downgrade to 355):CECH2504A (JTP-001) with 3.56 from factory - datecode 1B //--><span style="color:#F06060; background-color:#FFFFFF; ">(RLOD+)poweroff&nbsp;@&nbsp;downgrade&nbsp;355</span>
|-
| style="text-align:center;" |  || CECH2504B (JSD-001) with <span style="color:#F06060; background-color:#FFFFFF; ">3.60&nbsp;from&nbsp;factory</span> - <span style="color:#F06060; background-color:#FFFFFF; ">datecode&nbsp;1B</span><br />CECH3012A (KTE-001) with <span style="color:#F06060; background-color:#FFFFFF; ">3.65&nbsp;from&nbsp;factory</span> - <span style="color:#F06060; background-color:#FFFFFF; ">datecode&nbsp;[N.A.]</span> || style="text-align:center;" | F9 20 || style="text-align:center;" | 0F 8E || style="text-align:center;" | 2F FB || style="text-align:center;" | 2F FB || <small>"metldr.2"</small><br /><!--// Nodial2ne:CECH-3012A - Date Code [N.A.] factory 3.65 //--><span style="color:#F06060; background-color:#FFFFFF; ">(RLOD+)poweroff&nbsp;@&nbsp;downgrade&nbsp;355</span>
|-
|}

==Patch the dump & Reflash it to the console ==
<div style="float:right">[[File:Flowrebuilder-Autopatcher.png|200px|thumb|left|Flowrebuilder : Autopatcher]][[File:Flowrebuilder-Autopatcher-completed.png|200px|thumb|right|Flowrebuilder : Autopatcher - completed]]</div>

For patching you can use:
* Hexeditor (e.g. [http://mh-nexus.de/en/hxd/ HxD])
* [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/Tools/Flowrebuilder/ Flowrebuilder] (both NOR + unified NAND)
* in case of Progskeet, latest Winskeet/iSkeet/YASkeet (both NOR + unified NAND)
* [http://www.betterwayelectronics.com/files/BwE_NOR-NAND_Patcher.rar BwE NOR/NAND Patcher]
	
[http://pastie.org/5400071 NAND + NOR patchfile.txt]
	 
=== NAND ===
Use [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NAND%20downgrade/ NAND patches] only on NAND consoles, not on NOR!
	
{|class="wikitable"
|-
! Target area !! Patchfile !! NAND Offset !! Paste length !! Remarks
|-
| ROS0 || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NAND%20downgrade/NAND-patch1-0x0C0030.bin patch1&nbsp;(7&nbsp;MB)] || 0x0C0030 || 0x6FFFE0 || CoreOS (prepatched 3.55)
|-
| ROS1 || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NAND%20downgrade/NAND-patch1-0x0C0030.bin patch1&nbsp;(7&nbsp;MB)] || 0x7C0020 || 0x6FFFE0 || CoreOS (SAME as ros0)
|-
| trvk_prg0&nbsp;(0x91800)<br />trvk_prg1&nbsp;(0x92810)<br />trvk_pkg&nbsp;(0x93800) || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NAND%20downgrade/NAND-patch2-0x91800.bin patch2&nbsp;(16&nbsp;KB)] || 0x91800 || 0x4000 || one big patch overlapping several revoke area's
|-
|}
(above patches in a single package + autopatcher file: [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NAND%20downgrade.rar NAND downgrade.rar] [https://www.mirrorcreator.com/files/1XYAWMUJ/NAND_downgrade.rar_links])

=== NOR ===
Use [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NOR%20downgrade/ NOR patches] only on NOR consoles, not on NAND!
{|class="wikitable"
|-
! Target area !! Patchfile !! NOR Offset !! Paste length !! Remarks
|-
| ROS0 || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NOR%20downgrade/patch1 patch1 (7 MB)] || 0x0C0010 || 0x6FFFE0 || CoreOS (prepatched 3.55)
|-
| ROS1 || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NOR%20downgrade/patch1 patch1 (7 MB)] || 0x7C0010 || 0x6FFFE0 || CoreOS (SAME as ros0)
|-
| trvk_prg0 (0x40000) <br />trvk_prg1 (0x60000)<br />trvk_pkg0 (0x80000) <br />trvk_pkg1 (0xA0000) || [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NOR%20downgrade/rvk-040000 rvk-040000 (512 KB)] || 0x40000 || 0x80000 || one big patch<br />overlapping several revoke area's
|-
|}
(above patches in a single package + autopatcher file: [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/patches/NOR%20downgrade.rar NOR downgrade.rar] [https://www.mirrorcreator.com/files/J9ETURMM/NOR_downgrade.rar_links])

==== E3 Flasher ====
Use these instead, otherwise you get into a maze of bytereversing: [[E3#Manual_E3_downgrade_v2|E3 Manual downgrade patches]] or use [http://www.betterwayelectronics.com/files/BwE_NOR-NAND_Patcher.rar BwE NOR/NAND Patcher]

==Reinstall firmware in Factory Service Mode==
<div style="float:right">
[[File:Eclipse-inserted-in-FAT-PS3-green-led-lit.png|200px|thumb|left|PSGrade/JIG - in rightmost USB Port - for triggering factory service mode]]<br />[[File:USBSTICK-content-for-factory-service-mode-downgrading.png|200px|thumb|left|USBSTICK - content for factory service mode - downgrading]]<br />[[File:Sandisk-Cruzer-4GB-nonU3-inserted-in-Fat-PS3.png|200px|thumb|left|USBSTICK - in rightmost USB Port - for installing in factory service mode]]</div>

For this step it is required to have the console fully assembled (connected PSU, coolingblock+fan, harddrive, wifi/bt board, blu-ray drive etc).

<ol>
<li>Use the PSGrade/JIG dongle to trigger Factory Service Mode
<ul>
<li>Remove power from the console (rear power switch or remove powercord)</li>
<li>Put PSGrade/JIG dongle in the rightmost USB port (closest to the Blu-Ray drive)</li>
<li>Power the console so it is in standby (rear power switch or attach powercord)</li>
<li>Press power button on front of the PS3 then immediately press eject within ~100ms</li>
<li>If powered on correctly your dongle will light up (usually green) and trigger Factory Service Mode. The PSGrade will then power off the console. If it boots into the XMB with a red FSM logo in the corner you are using an old PSGrade.</li>
</ul>
<li> Put the Lv2diag.self (see below) and a [[Downgrading with Hardware flasher#PUP_to_use|pre-patched firmware]] to install (named PS3UPDAT.PUP) in root of your USB Mass Storage Device and plug it in the PS3 (in the same port as the PSGrade).</li>
<li> Turn PS3 on and it will automatically install the firmware you had put there. You will not have anything on the screen, you can only tell it is installing by the flashing USB and PS3's HDD light</li>
<li> PS3 will turn itself off after finishing the firmware installation (If it flashes red the firmware did not install correctly).<br />A logfile should be present in root of the USB Mass Storage Device with no errors</li>
</ol>

See also [[Downgrading with PSgrade Dongle]], which also contains alot of ready to use PSgrade HEX files for several dongles.

=== PUP to use ===
{{RogeroFirmware}} or any firmware with prepatched lv1 (no syscon hash checks)

'''Note:''' if your end-goal is a 3.56+ MFW, then it is safer to downgrade ''first'' to 3.55. Upgrading in service mode (mostly [[Error Codes|errors out]] [http://pastie.org/1358201 0x8002f14e]) is never recommended (only lower or same version).

=== Different Factory Service Mode SELFs ===
==== NAND ====
For factory Service Mode install:
* if using the normal lv2diag : Use a NoBD patched PUP (e.g. Rogero NoBD PUP) (to prevent error 0x8002f057)
* <span style="text-decoration: line-through; background-color:#FFDDDD;">if using the jaicrab NoBD lv2diag : Use the Rogero normal PUP -</span> see note below (and redump flash after FSM to check both ROS)

'''note:''' since V3 Rogero is only available as noBD, use that one with normal lv2diag.self

==== NOR ====
Use the normal lv2diag and use the Rogero normal PUP

Only when having a console with a broken bluraydrive, you either:
* use the normal lv2diag : Use a NoBD patched PUP (e.g. Rogero NoBD PUP) (to prevent error 0x8002f057)
* <span style="text-decoration: line-through; background-color:#FFDDDD;">use the jaicrab NoBD lv2diag : Use the Rogero normal PUP -</span> see note below

'''note:''' since V3.7 Rogero is only available as noBD, use that one with normal lv2diag.self 

{|class="wikitable"
! Filename !! Size !! Remarks !! <code>SHA1</code> !! <code>MD5</code> !! <code>CRC32</code> !! <code>CRC16</code>
|-
| style="text-align:center; background-color:#DDFFDD;" | [https://archive.org/download/downgrade_files_3.55_br_safe/Get%20Into%20FSM/Lv2diag.self Lv2diag.self&nbsp;(365.5&nbsp;KB) ]|| style="text-align:center; background-color:#DDFFDD;" | 374272 || style="text-align:center; background-color:#DDFFDD;" | 3.55 in FSM * || style="text-align:center; background-color:#DDFFDD;" | <code>[https://www.google.com/#q=1ED037740D67FEBACA6449CABFF4E95400C9E2EE 1ED037740D67FEBACA6449CABFF4E95400C9E2EE]</code> || style="text-align:center; background-color:#DDFFDD;" | <code>[https://www.google.com/#q=099F33A7967F99E91C07E870FD78B3DB 099F33A7967F99E91C07E870FD78B3DB]</code> || style="text-align:center; background-color:#DDFFDD;" | <code>9338ABF2</code> || style="text-align:center; background-color:#DDFFDD;" | <code>4FCC</code>
|-
<!--//
| [https://web.archive.org/web/*/http://ps3devwiki.com/files/lv2diag/3.50%20downgrader/FILE1/Lv2diag.self Lv2diag.self (365.5 KB)] || 374272 || 3.50- in FSM || <code>[https://www.google.com/#q=1E770010A3A6EF572AF39783A04DF792670998D3 1E770010A3A6EF572AF39783A04DF792670998D3]</code> || <code>[https://www.google.com/#q=90168C03B217CE775A7839D87BBFF2A3 90168C03B217CE775A7839D87BBFF2A3]</code> || <code>D1F0AAFC</code> || <code>CD8D</code>
|- //-->
| style="text-align:center; background-color:#FFDDDD;" | [https://archive.org/download/downgrade_files_3.55_br_safe/Lv2diag.self%20%28file%201%29%20by%20JaicraB/ Lv2diag.self&nbsp;(227.38&nbsp;KB)] || style="text-align:center; background-color:#FFDDDD;" | 232832 || style="text-align:center; background-color:#FFDDDD;" | jaicrab noBD patched || style="text-align:center; background-color:#FFDDDD;" | <code>[https://www.google.com/#q=180823003B086D9D49BC7F83BEA9C769BF73A5EA 180823003B086D9D49BC7F83BEA9C769BF73A5EA]</code> || style="text-align:center; background-color:#FFDDDD;" | <code>[https://www.google.com/#q=3615770407C0C3FA00D8CA49C8ADB362 3615770407C0C3FA00D8CA49C8ADB362]</code> || style="text-align:center; background-color:#FFDDDD;" | <code>25E85CFB</code> || style="text-align:center; background-color:#FFDDDD;" | <code>EDD0</code>
|-
|}
''* recommended default choice, see above notes''
mirrors: http://mir.cr/1HRZ3M2N / http://mir.cr/060LU86N / http://mir.cr/ATL2LSGI / http://www.mediafire.com/download.php?zmcgdgj6sdh87se /

=== Check the logfile ===
<div style="float:right">[[File:PS3-factory-service-mode-for-downgrade.png|200px|thumb|left|XMB red square notification - factory service mode ]]</div>

After installation of the firmware, take the created logfile in root of USB Mass Storage Device and look if it contains [[Error_Codes#0x8002f..._-_PUP_.2F_Update_errors|errors]] ([http://pastie.org/pastes/new pastie] the log if you want to ask for help online on IRC)


'''Tip:'''
:: You can boot console to XMB while still in FSM, if you want to be ''really'' sure it installed fine.

'''Remarks:'''
::*If you are using a component cable the image might be garbled.
::*If you are using HDMI, you don't have any screenoutput at all after the "press PS-button" message. (note: conflicting reports on HDMI working or not in FSM)

=== Getting out of Factory Service Mode ===
<div style="float:right">[[File:USBSTICK-content-for-exit-factory-service-mode.png|200px|thumb|left|USBSTICK - content for exit factory service mode ]]</div>

If everything went fine without errors, you can take the console out of service mode and enjoy your downgraded console :)

# Put the Lv2diag.self (see below) in root of your USB Mass Storage Device and plug it in the PS3 (again, in the rightmost USB port).
# Turn PS3 on, it will trigger Factory Service Mode off and shutdown.

{|class="wikitable"
! Filename !! Size !! Remarks !! <code>SHA1</code> !! <code>MD5</code> !! <code>CRC32</code> !! <code>CRC16</code>
|-
| [https://archive.org/download/lv-2diag.self.-560.v-0.1-brewology-com_202403/Lv2diag.self Lv2diag.self&nbsp;(201.42&nbsp;KB) ]|| 206256 || get out FSM || <code>[https://www.google.com/#q=329877CBD47B994EC0AFCEA6AF98114FD9E5128B 329877CBD47B994EC0AFCEA6AF98114FD9E5128B]</code> || <code>[https://www.google.com/#q=7A20BFDAE65EEFB47A4425DB1B52DCDE 7A20BFDAE65EEFB47A4425DB1B52DCDE]</code> || <code>72740080</code> || <code>502A</code>
|-
|}

== Dehashing ==
{{Dehashing}}

=== QA dehashing ===
{{QA dehashing}}

=== reFSM dehashing ===
{{reFSM dehashing}}

==== Remarks ====
<!--// '''ReFSM''' way is strongly recommended over '''QA''' if you do NOT install a nonpatched firmware //-->
* FSM gets you a installer LOG (QA does not)
* FSM does not delete ACT.DAT ([[QA_Flagging#Act.dat_.28PSN_activation.29_gets_deleted|QA does]])
* FSM can be done without a BD drive with noBD patched firmware (QA needs the BD drive present)
* FSM can be done without seeing XMB or Recovery (QA needs Recovery and XMB for the QA-flagging package)

Both ways ''require'' installing nonpatched firmware to dehash syscon bank. QA-flag can be removed/reset (but it is better to keep it flagged) after succesfull dehash, without bricking.


  <domelec> dehash procedure: fsm install ofw
            after console turns off take out usb stick and look at log file, 
            if log is ok then reinsert usb stick and turn on console,
            ofw will then reinstall, after console turns off again 
            take out usb stick and check log, if ok then exit fsm 

  <eussNL> do double FSM OFW, then get out of service mode.
  <eussNL> check everything is working
  <eussNL> THEN and only THEN, you can install whatever you want, in recovery.
  <eussNL> there is no need for factory mode after dehashing complete
  <eussNL> in fact, if everything works on OFW 3.55 after dehashing, 
  <eussNL> you can install [https://web.archive.org/web/*/http://ps3devwiki.com/files/firmware/MFW-CEX/Downgrader/Rogero-V3.2/ Rogero V3.2] in recovery and [https://web.archive.org/web/*/http://ps3devwiki.com/files/flash/Tools/toggle-qa/ QA-extra] flag it  
  <eussNL> if OFW 3.55 works then you proven that you dehashed
  <eussNL> so after that you can install whatever MFW 3.55 you want

  <eussNL> If for some reason you cannot dehash because of BD or BT errors
           then you can use PS3MFW Builder and the broken Blueray / broken Bluetooth
           tasks. Do not select downgrader patches, or you will not dehash!

  <eussNL> BD error can be persistant if flasher is still attached, 
           see: http://www.ps3devwiki.com/wiki/Talk:Hardware_flashing#BD_drive_not_found_problem
  <eussNL> 3 options: 1. open R7/R8  /  2. remove flasher control lines / 3. remove all flasher wiring

  <playonlcd> i  think you can update on wiki "dehashing with jaicrab is not recommended
              and will not dehash as needed and thus semibrick by syscon hash panic


{{Hardware Flashers}}<noinclude>
[[Category:Main]]
</noinclude>