Editing Downgrading with Hardware flasher

==Reinstall firmware in Factory Service Mode==
<div style="float:right">
[[File:Eclipse-inserted-in-FAT-PS3-green-led-lit.png|200px|thumb|left|PSGrade/JIG - in right most USB Port - for triggering factory service mode]]<br />[[File:USBSTICK-content-for-factory-service-mode-downgrading.png|200px|thumb|left|USBSTICK - content for factory service mode - downgrading]]<br />[[File:Sandisk-Cruzer-4GB-nonU3-inserted-in-Fat-PS3.png|200px|thumb|left|USBSTICK - in right most USB Port - for installing in factory service mode]]</div>

For this step it is required to have the console fully assembled (connected PSU, harddrive, wifi/bt board, blu-ray drive etc).

<ol>
<li>Use the PSGrade/JIG dongle to trigger Factory Service Mode
<ul>
<li>Remove power from the console (rear power switch or remove powercord)</li>
<li>Put PSGrade/JIG dongle in the right-most USB port (closest to the Blu-Ray drive)</li>
<li>Power the console so it is in standby (rear power switch or attach powercord)</li>
<li>Press power button on front of the PS3 then immediately press eject within ~100ms</li>
<li>If powered on correctly your dongle will light up (usually green) and trigger Factory Service Mode. The PSGrade will then power off the console. If it boots into the XMB with a red FSM logo in the corner you are using an old PSGrade.</li>
</ul>
<li> Put the Lv2diag.self (see below) and a [[Downgrading with Hardware flasher#PUP_to_use|pre-patched firmware]] to install (named PS3UPDAT.PUP) in root of your USB Mass Storage Device and plug it in the PS3 (in the same port as the PSGrade).</li>
<li> Turn PS3 on and it will automatically install the firmware you had put there. You will not have anything on the screen, you can only tell it is installing by the flashing USB and PS3's HDD light</li>
<li> PS3 will turn itself off after finishing the firmware installation (If it flashes red the firmware did not install correctly).<br />A logfile should be present in root of the USB Mass Storage Device with no errors</li>
</ol>

See also [[Downgrading with PSgrade Dongle]], which also contains alot of ready to use PSgrade HEX files for several dongles.

=== PUP to use ===
{{RogeroFirmware}} or any firmware with prepatched lv1 (no syscon hash checks)

'''Note:''' if your end-goal is a 3.56+ MFW, then it is safer to downgrade ''first'' to 3.55. Upgrading in service mode is never recommended (only lower or same version).

=== Different Factory Service Mode SELFs ===
==== NAND ====
For factory Service Mode install:
* if using the normal lv2diag : Use a NoBD patched PUP (e.g. Rogero NoBD PUP) (to prevent error 0x8002f057)
* <span style="text-decoration: line-through; background-color:#FFDDDD;">if using the jaicrab NoBD lv2diag : Use the Rogero normal PUP -</span> see note below (and redump flash after FSM to check both ROS)

'''note:''' since V3 Rogero is only available as noBD, use that one with normal lv2diag.self

==== NOR ====
Use the normal lv2diag and use the Rogero normal PUP

Only when having a console with a broken bluraydrive, you either:
* use the normal lv2diag : Use a NoBD patched PUP (e.g. Rogero NoBD PUP) (to prevent error 0x8002f057)
* <span style="text-decoration: line-through; background-color:#FFDDDD;">use the jaicrab NoBD lv2diag : Use the Rogero normal PUP -</span> see note below

'''note:''' since V3.7 Rogero is only available as noBD, use that one with normal lv2diag.self 

{|class="wikitable"
! Filename !! Size !! Remarks !! <code>SHA1</code> !! <code>MD5</code> !! <code>CRC32</code> !! <code>CRC16</code>
|-
| style="text-align:center; background-color:#DDFFDD;" | [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE1/Lv2diag.self Lv2diag.self&nbsp;(365.5&nbsp;KB)] || style="text-align:center; background-color:#DDFFDD;" | 374272 || style="text-align:center; background-color:#DDFFDD;" | 3.55 get in FSM * || style="text-align:center; background-color:#DDFFDD;" | <code>1ED037740D67FEBACA6449CABFF4E95400C9E2EE</code> || style="text-align:center; background-color:#DDFFDD;" | <code>099F33A7967F99E91C07E870FD78B3DB</code> || style="text-align:center; background-color:#DDFFDD;" | <code>9338ABF2</code> || style="text-align:center; background-color:#DDFFDD;" | <code>4FCC</code>
|-
<!--//
| [http://www.ps3devwiki.com/files/lv2diag/3.50%20downgrader/FILE1/Lv2diag.self Lv2diag.self&nbsp;(365.5&nbsp;KB)] || 374272 || 3.50- get in FSM || <code>1E770010A3A6EF572AF39783A04DF792670998D3</code> || <code>90168C03B217CE775A7839D87BBFF2A3</code> || <code>D1F0AAFC</code> || <code>CD8D</code>
|- //-->
| style="text-align:center; background-color:#FFDDDD;" | [http://www.ps3devwiki.com/files/lv2diag/3.55%20jaicrab%20downgrader/Lv2diag.self Lv2diag.self&nbsp;(227.38&nbsp;KB)] || style="text-align:center; background-color:#FFDDDD;" | 232832 || style="text-align:center; background-color:#FFDDDD;" | jaicrab noBD patched || style="text-align:center; background-color:#FFDDDD;" | <code>180823003B086D9D49BC7F83BEA9C769BF73A5EA</code> || style="text-align:center; background-color:#FFDDDD;" | <code>3615770407C0C3FA00D8CA49C8ADB362</code> || style="text-align:center; background-color:#FFDDDD;" | <code>25E85CFB</code> || style="text-align:center; background-color:#FFDDDD;" | <code>EDD0</code>
|-
|}
''* recommended default choice, see above notes''

=== Check the logfile ===
After installation of the firmware, take the created logfile in root of USB Mass Storage Device and look if it contains [[Error_Codes#0x8002f..._-_PUP_.2F_Update_errors|errors]] ([http://pastie.org/pastes/new pastie] the log if you want to ask for help online on IRC)

'''Tip:''' You can boot console to XMB while still in FSM, if you want to be ''really'' sure it installed fine.

=== Getting out of Factory Service Mode ===
<div style="float:right">[[File:USBSTICK-content-for-exit-factory-service-mode.png|200px|thumb|left|USBSTICK - content for exit factory service mode ]]</div>
If everything went fine without errors, you can take the console out of service mode and enjoy your downgraded console :)

# Put the Lv2diag.self (see below) in root of your USB Mass Storage Device and plug it in the PS3 (again, in the rightmost USB port).
# Turn PS3 on, it will trigger Factory Service Mode off and shutdown.

{|class="wikitable"
! Filename !! Size !! Remarks !! <code>SHA1</code> !! <code>MD5</code> !! <code>CRC32</code> !! <code>CRC16</code>
|-
| [http://www.ps3devwiki.com/files/lv2diag/3.55%20downgrader/FILE2/Lv2diag.self Lv2diag.self&nbsp;(201.42&nbsp;KB)] || 206256 || get out FSM || <code>329877CBD47B994EC0AFCEA6AF98114FD9E5128B</code> || <code>7A20BFDAE65EEFB47A4425DB1B52DCDE</code> || <code>72740080</code> || <code>502A</code>
|-
|}