MechaCon/UART commands/Dragon
Jump to navigation
Jump to search
Command list[edit | edit source]
Note: This is subject to ongoing research, HIGHLY INCOMPLETE and partially inaccurate
All communication uses ASCII-encoded Hex-values.
Not all of these commands are available on every MechaCon version
| Command | Description | Parameters | Return values | Usage/Remarks |
|---|---|---|---|---|
| 0xcf4 | MECHA_CMD_WRITE_1A6 | dddddddddddddddd | cf4dddddddddddddddd (d = data) | |
| 0xcf5 | MECHA_CMD_READ_1A6 | sssdddddddddddddddd | (s = status, d = data) | |
| 0xcf6 | MECHA_CMD_READ_1EA_1FA | sdddddddddddddddd | (s = status, d = data) | |
| 0xcf7 | MECHA_CMD_WRITE_1EA_1FA | dddddddddddddddd | cf7dddddddddddddddd (d = data) | |
| 0xcfa | MECHA_CMD_WRITECONFIG | aadddddddddddddddd | cfaAAdddddddddddddddd (A = address, d = data) | |
| 0xcfb | MECHA_CMD_READCONFIG | aa | cfbaa (a = address) |