Remote Control

From PS2 Developer wiki
Revision as of 19:51, 1 November 2023 by Nino (talk | contribs)
Jump to navigation Jump to search

Overview

Separate sets were sold, either for consoles with or without integrated IR receiver. The latter always came with an IR-receiver and a DVD player update disc to add software support for the remote control.

Model numbers

  • SCPH-10150
    • Remote control for use with the SCPH-10160 IR receiver
  • SCPH-10160
    • IR receiver for use with the SCPH-10150 remote control. Plugs into a controller port.
  • SCPH-10420
    • Remote control for use only on consoles with integrated IR receiver (SCPH-5XXXX and all slim consoles). Can also remotely turn on/off the console and open/close the disc tray via two additional buttons.

Bundles

  • SCPH-18000 (PS2 console)
    • Japan-only
    • Released on December 8th, 2000
    • All SCPH-18000 consoles (A+ and AB-chassis) came bundled with the SCPH-10150 remote control as well as the SCPH-10160 IR receiver. These consoles also have DVD player 2.00 installed in ROM, which supports the remote control out of the box.
    • Buying a SCPH-18000 PS2 console is indeed the first way the remote control became available to end users.
  • SCPH-10170
    • Released on December 22nd, 2000
    • Japanese bundle containing remote control (SCPH-10150), IR receiver (SCPH-10160), batteries and DVD player install/update disc. Released in Japan in December 2000.
    • Meant for use with SCPH-10000 and SCPH-15000 PS2 consoles, since SCPH-18000 consoles already included the remote control.
  • SCPH-10171
    • North American bundle containing remote control (SCPH-10150), IR receiver (SCPH-10160), batteries and DVD player install/update disc 2.10, 2.12 or 2.14.
  • SCPH-10172
    • European bundle containing remote control (SCPH-10150), IR receiver (SCPH-10160), batteries and DVD player install/update disc 2.10 or 2.14.
  • SCPH-10173
    • Australian bundle containing remote control (SCPH-10150), IR receiver (SCPH-10160), batteries and DVD player install/update disc 2.10 or 2.14.
  • SCPH-10420 (+ region suffix, e.g. J for Japan, U for US and E for Europe)
    • Bundle containing the SCPH-10420 remote control (only for SCPH-5XXXX and up) with some batteries. No IR receiver and no DVD player install/update disc are included, since these are not needed for operation.