MechaCon/UART commands: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Overview == These commands can be sent to MechaCon. They exist for manufacturing and servicing purposes. For wiring up a terminal to the MechaCon UART-interface, see ...") |
No edit summary |
||
| Line 1: | Line 1: | ||
== Overview == | == Overview == | ||
These commands can be sent to [[MechaCon]]. They exist for manufacturing and servicing purposes. For wiring up a terminal to the MechaCon UART-interface, see [[Test points/MechaCon UART|MechaCon UART test points]]. | These commands can be sent to [[MechaCon]]. They exist for manufacturing and servicing purposes. For wiring up a terminal to the MechaCon UART-interface, see [[Test points/MechaCon UART|MechaCon UART test points]]. | ||
To enable the UART interface, the console must be put in testmode by pulling the RMC test point to ground. | |||
'''Instead of working with raw MechaCon commands, it is recommended for users to use pre-made tools like [https://github.com/ps2homebrew/PMAP/tags PMAP]. The purpose of this page is to provide documentation for the further development of PS2 tools.''' | |||
Revision as of 10:32, 26 April 2023
Overview
These commands can be sent to MechaCon. They exist for manufacturing and servicing purposes. For wiring up a terminal to the MechaCon UART-interface, see MechaCon UART test points. To enable the UART interface, the console must be put in testmode by pulling the RMC test point to ground.
Instead of working with raw MechaCon commands, it is recommended for users to use pre-made tools like PMAP. The purpose of this page is to provide documentation for the further development of PS2 tools.