Power Supply: Difference between revisions

From PS2 Developer wiki
Jump to navigation Jump to search
m (SCPH-50000's ZSSR257YA (100V) found in a YT restoration video)
 
(42 intermediate revisions by 4 users not shown)
Line 1: Line 1:
= Internal power supplies =
= Internal power supplies =
== Unknown ==
==== Matsushita/Panasonic ====
* ETXNY296J9A (100 V); Sony part no. 1-468-540-11 (which output voltage? which chassis? goes into a PCMCIA console, but is it A, A+ or AB?)
== A/A+ chassis (SCPH-10000 and SCPH-15000 series, GH-003 based SCPH-18000 series) ==
== A/A+ chassis (SCPH-10000 and SCPH-15000 series, GH-003 based SCPH-18000 series) ==
The earliest retail PS2 power supplies, used in early japanese consoles. These power supllies are region-exclusive.
The earliest retail PS2 power supplies, used in early Japanese consoles. These power supllies are region-exclusive.


'''Warning: Despite having the same mechanical form factor as later 12 V power supplies used in the AB chassis (GH-008), GH-001 and GH-003 take 8.5 V instead! Installing a 12 V power supply in these consoles will damage them!'''
'''Warning: Despite having the same mechanical form factor as later 12 V power supplies used in the AB chassis (GH-008), GH-001 and GH-003 take 8.5 V instead! Installing a 12 V power supply in these consoles will damage them!'''
{| class="wikitable"
{| class="wikitable"
|+ Specifications
|+ Specifications
|Wattage||
|Wattage||68 to 76.5 W (unconfirmed)
|-
|-
|Output voltage||8.5 V '''Never install a 12 V power supply in these consoles!'''
|Output voltage||8.5 V '''Never install a 12 V power supply in these consoles!'''
|-
|-
|Max output amperage||?
|Max output amperage||8 to 9 A (unconfirmed)
|-
|-
|Input voltage||100 V (Japan)
|Input voltage||100 V (Japan)
Line 23: Line 19:
==== Nichicon ====
==== Nichicon ====
* ZSSR908JA (100 V); Sony part no. 1-468-453-11
* ZSSR908JA (100 V); Sony part no. 1-468-453-11
** '''Capacitors have leaked in at least one example.'''
** 2x Nichicon GU(M) series, 680uF, 150V, 105°C, 10mm pin pitch (clips), 22.5mm ⌀, 32mm h
** 5x Nichicon HD series, 2200uF, 16V, 105°, 5mm pin pitch, 12.5mm ⌀, 25mm h
{| class="wikitable" style="text-align: center"
{| class="wikitable" style="text-align: center"
|[[File:14mI5zl.jpg|200px]]||[[File:tQsskrj.jpg|200px]]
|[[File:14mI5zl.jpg|200px]]||[[File:tQsskrj.jpg|200px]]
Line 34: Line 33:
|ZSSR908ZA front||ZSSR908ZA back
|ZSSR908ZA front||ZSSR908ZA back
|}
|}
==== Matsushita/Panasonic ====
* ETXNY296J9A (100 V); Sony part no. 1-468-540-11 (Seen in a SCPH-15000)


== AB chassis (GH-008 based SCPH-18000 series) ==
== B/B'/C/C' chassis (early SCPH-3000x series) ==
Uses an identical form factor to the power supplies used in A and A+ chassis (GH-001 and GH-003), however, this power supply outputs 12 V instead. Due to the identical form factor, it is mechanically possible to install an AB chassis power supply in an A/A+ chassis console; however, this would damage the console by overvolting it!
Used in early North-American and European consoles. These power-supplies are region-exclusive. They retain the same basic form factor as the earlier Japanese power supplies, but the exact location of the power connector has been slightly offset to the left to make room for a screwhole to the right side of it.
{| class="wikitable"
{| class="wikitable"
|+ Specifications
|+ Specifications
|Wattage||
|Wattage||72 to 84 W (unconfirmed)
|-
|-
|Output voltage||12 V '''Never install these power supplies in an 8.5 V console (A/A+ chassis)!'''
|Output voltage||12 V
|-
|-
|Max output amperage||?
|Max output amperage||6 to 7 A (unconfirmed)
|-
|-
|Input voltage||100 V (Japan)
|Input voltage||120 V (USA)
 
220 V - 240 V (Europe - Asia)
|-
|-
|Input frequency||50 / 60 Hz
|Input frequency||50 / 60 Hz
Line 51: Line 54:
=== Models ===
=== Models ===
==== Nichicon ====
==== Nichicon ====
* ZSSR086JA (100 V); Sony part no. 1-476-629-11
* ZSSR048MA (120 V); Sony part no. 1-468-563-11
* ZSSR048ZA (120 V); Sony part no. 1-468-563-21
{| class="wikitable" style="text-align: center"
{| class="wikitable" style="text-align: center"
|[[File:AB chassis nichicon PSU top.jpg|200px]]||[[File:AB chassis nichicon PSU bottom.jpg|200px]]
|[[File:WGJs9qB.jpg|200px]]||[[File:VJvE82o.jpg|200px]]
|-
|-
|ZSSR086JA front||ZSSR086JA back
|ZSSR048ZA front||ZSSR048ZA back
|}
|}
* ZSSR005ZA (220 V - 240 V); Sony part no. 1-468-565-21 or -22 (several revisions?)
==== Matsushita/Panasonic ====
==== Matsushita/Panasonic ====
* ETXNY338J7A (100 V); Sony part no. 1-476-630-11
* ETXNY323E7A (220 V - 240 V); Sony part no. 1-468-589-12 or -13 (several revisions?)


== B/B'/C/C' chassis (early SCPH-3000x series) ==
== AB chassis (GH-008 based SCPH-18000 series) ==
Used in early north-american and european consoles. These power-supplies are region-exclusive. They retain the same basic form factor as the earlier japanese power supplies, but the exact location of the power connector has been slightly offset to the left to make room for a screwhole to the right side of it.
Uses an identical form factor to the power supplies used in A and A+ chassis (GH-001 and GH-003), however, just like the B/B'/C/C' chassis power supplies, '''these power supplies output 12 V instead'''. Due to the identical form factor, '''it is mechanically possible to install an AB chassis power supply in an A/A+ chassis console; however, this would damage the console by overvolting it!'''
{| class="wikitable"
{| class="wikitable"
|+ Specifications
|+ Specifications
|Wattage||
|Wattage||72 to 84 W (unconfirmed)
|-
|-
|Output voltage||12 V
|Output voltage||12 V '''Never install these power supplies in an 8.5 V console (A/A+ chassis)!'''
|-
|-
|Max output amperage||?
|Max output amperage||6 to 7 A (unconfirmed)
|-
|-?
|Input voltage||120 V (USA)
|Input voltage||100 V (Japan)
 
220 V - 240 V (Europe - Asia)
|-
|-
|Input frequency||50 / 60 Hz
|Input frequency||50 / 60 Hz
Line 78: Line 82:
=== Models ===
=== Models ===
==== Nichicon ====
==== Nichicon ====
* ZSSR048MA (120 V); Sony part no. 1-468-563-11
* ZSSR086JA (100 V); Sony part no. 1-476-629-11
* ZSSR048ZA (120 V); Sony part no. 1-468-563-21
{| class="wikitable" style="text-align: center"
{| class="wikitable" style="text-align: center"
|[[File:WGJs9qB.jpg|200px]]||[[File:VJvE82o.jpg|200px]]
|[[File:AB chassis nichicon PSU top.jpg|200px]]||[[File:AB chassis nichicon PSU bottom.jpg|200px]]
|-
|-
|ZSSR048ZA front||ZSSR048ZA back
|ZSSR086JA front||ZSSR086JA back
|}
|}
* ZSSR005ZA (220 V - 240 V); Sony part no. 1-468-565-21 or -22 (several revisions?)
==== Matsushita/Panasonic ====
==== Matsushita/Panasonic ====
* ETXNY323E7A (220 V - 240 V); Sony part no. 1-468-589-12 or -13 (several revisions?)
* ETXNY338J7A (100 V); Sony part no. 1-476-630-11


== D/D'/F/G chassis (late SCPH-3x0xx series) ==
== D/D'/F/G chassis (late SCPH-3x0xx series) ==
Line 99: Line 100:
|Output voltage||12 V
|Output voltage||12 V
|-
|-
|Max output amperage||6.2 A (Delta Electronics ADP-75EP B)
|Max output amperage||6.2 A (Delta Electronics ADP-75EP B)<br/>6 to 7 A (Matsushita PSUs, unconfirmed)
|-
|-
|Input voltage||100 V (Japan)
|Input voltage||100 V (Japan)
Line 110: Line 111:
=== Models ===
=== Models ===
==== Delta Electronics ====
==== Delta Electronics ====
* ADP-75EP B (120 V); Sony part no. 1-468-634-11 '''has a known issue with leaky or dry electrolytic capacitors (no visible bulge!)'''
* ADP-75EP B (120 V); Sony part no. 1-468-634-11 '''has a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink'''
 
==== Nichicon ====
==== Nichicon ====
* ZSSR093MA (120 V); Sony part no. 1-468-604-11
* ZSSR093MA (120 V); Sony part no. 1-468-604-11
Line 129: Line 131:


==== Matsushita/Panasonic ====
==== Matsushita/Panasonic ====
'''All of these have a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink'''
* ETXNY351A7A (120 V); Sony part no. 1-468-623-11
* ETXNY351A7A (120 V); Sony part no. 1-468-623-11
* ETXNY351A7AA (120 V); Sony part no. 1-468-623-21 or -31 (several revisions?)
* ETXNY351A7AA (120 V); Sony part no. 1-468-623-21 or -31 (several revisions?)
Line 144: Line 147:
|Output voltage||12 V
|Output voltage||12 V
|-
|-
|Max output amperage||7.2 A (Delta Electronics ADP-75JP C)
|Max output amperage||7.2 A (Delta Electronics ADP-75JP C)<br/>7 to 8 A (Matsushita PSUs, unconfirmed)
|-
|-
|Input voltage||100 V (Japan)
|Input voltage||100 V (Japan)
Line 155: Line 158:
=== Models ===
=== Models ===
==== Delta Electronics ====
==== Delta Electronics ====
* ADP-75JP B (120 V); Sony part no. 1-468-757-11 '''has a known issue with leaky or dry electrolytic capacitors (no visible bulge!)'''
'''All of these have a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink'''
* ADP-75JP D (120 V); Sony part no. 1-468-757-21 '''has a known issue with leaky or dry electrolytic capacitors (no visible bulge!)'''
* ADP-75JP B (120 V); Sony part no. 1-468-757-11
* ADP-75JP C (220 V - 240 V); Sony part no. 1-468-760-11 '''has a known issue with leaky or dry electrolytic capacitors (no visible bulge!)'''
* ADP-75JP D (120 V); Sony part no. 1-468-757-21
* ADP-75JP C (220 V - 240 V); Sony part no. 1-468-760-11
[[File:X0ZIlvB.jpg|200px]]</br>
[[File:X0ZIlvB.jpg|200px]]</br>
''Picture of a leaky capacitor on an ADP-75JP C (220 V - 240 V), next to the heatsink. Notice the area on the PCB where dust adheres to, as well as green residue and corrosion on surrounding components' legs. The damage on the picture prevented the power supply from powering up; it instantly went into safety shutdown and then restarted, causing an audible periodic clicking sound. Replacing the capacitor and cleaning off the electrolyte residue on the PCB and surrounding components fixed this power supply. This is a known issue with all fat PS2 Delta PSUs.''
''Picture of a leaky capacitor on an ADP-75JP C (220 V - 240 V), next to the heatsink. Notice the area on the PCB where dust adheres to, as well as green residue and corrosion on surrounding components' legs. The damage on the picture prevented the power supply from powering up; it instantly went into safety shutdown and then restarted, causing an audible periodic clicking sound. Replacing the capacitor and cleaning off the electrolyte residue on the PCB and surrounding components fixed this power supply. This is a known issue with all "fat" PS2 Delta PSUs.''
==== Nichicon ====
 
* ZSSR257JA (100 V); Sony part no. 1-468-726-11
====Nichicon====
* ZSSR257CA (100 V); Sony part no. 1-468-726-21
*ZSSR257JA (100 V); Sony part no. 1-468-726-11
* ZSSR258CA (120 V); Sony part no. 1-468-755-21
*ZSSR257CA (100 V); Sony part no. 1-468-726-21
* ZSSR256HA (220 V - 240 V); Sony part no. 1-468-758-11
*ZSSR257YA (100 V); Sony part no. 1-468-726-41
* ZSSR256CA (220 V - 240 V); Sony part no. 1-468-758-21
*ZSSR258CA (120 V); Sony part no. 1-468-755-21
* ZSSR????A (220 V - 240 V); Sony part no. 1-468-758-31 ''mentioned in SM, but there's no trace of it actually existing''
*ZSSR256HA (220 V - 240 V); Sony part no. 1-468-758-11
* ZSSR????A (220 V - 240 V); Sony part no. 1-468-758-41 ''mentioned in SM, but there's no trace of it actually existing''
*ZSSR256CA (220 V - 240 V); Sony part no. 1-468-758-21
* ZSSR305CA (220 V - 240 V); Sony part no. 1-468-792-21
*ZSSR????A (220 V - 240 V); Sony part no. 1-468-758-31 ''mentioned in SM, but there's no trace of it actually existing''
==== Matsushita/Panasonic ====
*ZSSR????A (220 V - 240 V); Sony part no. 1-468-758-41 ''mentioned in SM, but there's no trace of it actually existing''
* ETXNY406J8A (100 V); Sony part no. 1-468-725-11
*ZSSR305CA (220 V - 240 V); Sony part no. 1-468-792-21
* ETXNY406J8AA (100 V); Sony part no. 1-468-725-21
====Matsushita/Panasonic====
* ETXNY406A8A (120 V); Sony part no. 1-468-756-11
'''All of these have a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink'''
* ETXNY406A8AA (120 V); Sony part no. 1-468-756-21
*ETXNY406J8A (100 V); Sony part no. 1-468-725-11
* ETXNY406A8AB (120 V); Sony part no. 1-468-756-31
*ETXNY406J8AA (100 V); Sony part no. 1-468-725-21
* ETXNY406E8A (220 V - 240 V); Sony part no. 1-468-759-11
*ETXNY406A8A (120 V); Sony part no. 1-468-756-11
* ETXNY406E8AA (220 V - 240 V); Sony part no. 1-468-759-21
*ETXNY406A8AA (120 V); Sony part no. 1-468-756-21
*ETXNY406A8AB (120 V); Sony part no. 1-468-756-31
*ETXNY406E8A (220 V - 240 V); Sony part no. 1-468-759-11
*ETXNY406E8AA (220 V - 240 V); Sony part no. 1-468-759-21


== P/R chassis (slim SCPH-900xx series) ==
==P/R chassis (slim SCPH-900xx series)==


Power supplies present in the SCPH-900xx models are universal and work with any line voltage.
Power supplies present in the SCPH-900xx models are universal and work with any line voltage.
{| class="wikitable"
{| class="wikitable"
|+ Specifications
|+Specifications
|Wattage||33.75 W
|Wattage||33.75 W
|-
|-
Line 191: Line 198:
|Input voltage||100 V - 250 V
|Input voltage||100 V - 250 V
|-
|-
|Input frequency||50 / 60 Hz
|Input frequency|| 50 / 60 Hz
|}
|}


=== Models ===
===Models===
==== Delta Electronics ====
====Delta Electronics====
* EADP-34BF B (100 V - 250 V); Sony part no. 1-474-082-11
*EADP-34BF B (100 V - 250 V); Sony part no. 1-474-082-11
* EADP-34CF A (100 V - 250 V); Sony part no. 1-474-119-11
*EADP-34CF A (100 V - 250 V); Sony part no. 1-474-119-11


{| class="wikitable" style="text-align: center"
{| class="wikitable" style="text-align: center"
Line 205: Line 212:
|}
|}


= External power supplies =
=External power supplies =
 
==K/L/M chassis (slim SCPH-700xx to SCPH-770xx series)==
All of these power supplies have the Sony model number '''SCPH-70100'''.


== K/L/M chassis (slim SCPH-700xx to SCPH-770xx series) ==
'''In early 2005, it was found that some slim PS2 power supplies manufactured from August to December 2004 were defective and contained a component that could overheat. Affected was the Hipro model (HP-AT048H03, but not HP-AT048H03<u>B</u>) with a datecode from 2004.08 up to including 2004.12. The units were recalled by Sony and replaced by a 2005/2006/2007 model.'''
In early 2005, it was found that some black slimline console power transformers manufactured between August and December 2004 were defective and could overheat. The units were recalled by Sony and replaced by a 2005 model.


{| class="wikitable"
{| class="wikitable"
|+ Specifications
|+Specifications
|Wattage||48 W (Approximate)
|Wattage|| 48 W (Approximate)
|-
|-
|Output voltage||8.5 V
|Output voltage||8.5 V
Line 220: Line 229:
|Input voltage||100 V - 240 V
|Input voltage||100 V - 240 V
|-
|-
|Input frequency||50 / 60 Hz
|Input frequency|| 50 / 60 Hz
|}
|}


Line 228: Line 237:
|SCPH-70100 power supply (front).||SCPH-70100 power supply (back).
|SCPH-70100 power supply (front).||SCPH-70100 power supply (back).
|}
|}
=== Models ===
===Models===
==== Delta Electronics ====
====Delta Electronics====
* ADP-50VH
*ADP-50VH
* EADP-48AB
*ADP-50VHB
==== Hipro Electronics ====
*EADP-48AB
* HP-AT048H03
*EADP-48CB
 
====Hipro Electronics====
*HP-AT048H03 '''This model has been subject to a partial recall (see above)'''
*HP-AT048H03B


== N chassis (slim SCPH-790xx series) ==
====Nichicon====
*ZSSR422Z


==N chassis (slim SCPH-790xx series)==
All of these power supplies have the Sony model number '''SCPH-79100'''.
{| class="wikitable"
{| class="wikitable"
|+ Specifications
|+Specifications
|Wattage||38 W (Approximate)
|Wattage||38 W (Approximate)
|-
|-
|Output voltage||8.5 V
|Output voltage||8.5 V  
|-
|-
|Max output amperage||4.5 A
|Max output amperage||4.5 A  
|-
|-
|Input voltage||100 V - 240 V
|Input voltage||100 V - 240 V  
|-
|-
|Input frequency||50 / 60 Hz
|Input frequency||50 / 60 Hz
Line 255: Line 271:
|SCPH-79100 power supply (front).||SCPH-79100 power supply (back).
|SCPH-79100 power supply (front).||SCPH-79100 power supply (back).
|}
|}
=== Models ===
===Models===
==== Delta Electronics ====
====Delta Electronics====
* EADP-40CB
*EADP-40CB


= PSX power supplies =
=PSX power supplies=
{| class="wikitable"
{| class="wikitable"
|+ Specifications
|+Specifications
|Wattage||
|Wattage||approx. 96 - 108 W
|-
|-
|Output voltage||12 V
|Output voltage||12 V  
|-
|-
|Max output amperage||
|Max output amperage||8 to 9 A (unconfirmed)
|-
|-
|Input voltage||100 V (Japan)
|Input voltage||100 V (Japan)
Line 273: Line 289:
|}
|}


=== Interface ===
===Interface===
(DESR-7500)
(DESR-7500)
1x4 Through-pin socket. Two pins +12V, two pins ground. Pins closest to the corner of the board are +12V. No special signalling seen.


1x4 Through-pin socket. two pins +12V, two pins ground. Pins closest to the corner of the board are +12V. No special signalling seen.
===Models===
 
Ballpark replacement power supply current seems to be about 7A.
 
=== Models ===
''It seems that 1-468-805-xx and 1-468-806-xx are for PSX1 (XPD-001 motherboard) while 1-468-868-xx and 1-468-869-xx are for PSX2 (XPD-005 motherboard).''
''It seems that 1-468-805-xx and 1-468-806-xx are for PSX1 (XPD-001 motherboard) while 1-468-868-xx and 1-468-869-xx are for PSX2 (XPD-005 motherboard).''


==== Nichicon ====
====Nichicon====
* ZSSR343JA (100 V); Sony part no. 1-468-805-11 ''for PSX1/XPD-001''
*ZSSR343JA (100 V); Sony part no. 1-468-805-11 ''for PSX1/XPD-001''
* ZSSR414JA (100 V); Sony part no. 1-468-868-12 ''for PSX2/XPD-005''
*ZSSR414JA (100 V); Sony part no. 1-468-868-11 ''for PSX2/XPD-005''
*ZSSR414JA (100 V); Sony part no. 1-468-868-12 ''for PSX2/XPD-005''


==== Matsushita/Panasonic ====
====Matsushita/Panasonic====
* ETXNY499J9A (100 V); Sony part no. 1-468-806-11 ''for PSX1/XPD-001''
*ETXNY499J9A (100 V); Sony part no. 1-468-806-11 ''for PSX1/XPD-001''
* ETXNY499J9AA (100 V); Sony part no. 1-468-869-11 ''for PSX2/XPD-005 (DESR-7500)''
*ETXNY499J9AA (100 V); Sony part no. 1-468-869-11 ''for PSX2/XPD-005''
* ETXNY499J9AA (100 V); Sony part no. 1-468-869-12 ''for PSX2/XPD-005 (on some units, the 2 at the end of the part no. has been re-printed over a 1)''
*ETXNY499J9AA (100 V); Sony part no. 1-468-869-12 ''for PSX2/XPD-005 (on some units, the 2 at the end of the part no. has been re-printed over a 1)''
{| class="wikitable" style="text-align: center"
{| class="wikitable" style="text-align: center"
|[[File:Ux2OeOv.jpg|200px]]||[[File:ZemTE2y.jpg|200px]]
|[[File:Ux2OeOv.jpg|200px]]||[[File:ZemTE2y.jpg|200px]]

Latest revision as of 23:42, 1 November 2024

Internal power supplies[edit | edit source]

A/A+ chassis (SCPH-10000 and SCPH-15000 series, GH-003 based SCPH-18000 series)[edit | edit source]

The earliest retail PS2 power supplies, used in early Japanese consoles. These power supllies are region-exclusive.

Warning: Despite having the same mechanical form factor as later 12 V power supplies used in the AB chassis (GH-008), GH-001 and GH-003 take 8.5 V instead! Installing a 12 V power supply in these consoles will damage them!

Specifications
Wattage 68 to 76.5 W (unconfirmed)
Output voltage 8.5 V Never install a 12 V power supply in these consoles!
Max output amperage 8 to 9 A (unconfirmed)
Input voltage 100 V (Japan)
Input frequency 50 / 60 Hz

Models[edit | edit source]

Nichicon[edit | edit source]

  • ZSSR908JA (100 V); Sony part no. 1-468-453-11
    • Capacitors have leaked in at least one example.
    • 2x Nichicon GU(M) series, 680uF, 150V, 105°C, 10mm pin pitch (clips), 22.5mm ⌀, 32mm h
    • 5x Nichicon HD series, 2200uF, 16V, 105°, 5mm pin pitch, 12.5mm ⌀, 25mm h
14mI5zl.jpg TQsskrj.jpg
ZSSR908JA front ZSSR908JA back
  • ZSSR908ZA (100 V); Sony part no. 1-468-453-21
Hy6m8LR.jpg J3S8PmD.jpg
ZSSR908ZA front ZSSR908ZA back

Matsushita/Panasonic[edit | edit source]

  • ETXNY296J9A (100 V); Sony part no. 1-468-540-11 (Seen in a SCPH-15000)

B/B'/C/C' chassis (early SCPH-3000x series)[edit | edit source]

Used in early North-American and European consoles. These power-supplies are region-exclusive. They retain the same basic form factor as the earlier Japanese power supplies, but the exact location of the power connector has been slightly offset to the left to make room for a screwhole to the right side of it.

Specifications
Wattage 72 to 84 W (unconfirmed)
Output voltage 12 V
Max output amperage 6 to 7 A (unconfirmed)
Input voltage 120 V (USA)

220 V - 240 V (Europe - Asia)

Input frequency 50 / 60 Hz

Models[edit | edit source]

Nichicon[edit | edit source]

  • ZSSR048MA (120 V); Sony part no. 1-468-563-11
  • ZSSR048ZA (120 V); Sony part no. 1-468-563-21
WGJs9qB.jpg VJvE82o.jpg
ZSSR048ZA front ZSSR048ZA back
  • ZSSR005ZA (220 V - 240 V); Sony part no. 1-468-565-21 or -22 (several revisions?)

Matsushita/Panasonic[edit | edit source]

  • ETXNY323E7A (220 V - 240 V); Sony part no. 1-468-589-12 or -13 (several revisions?)

AB chassis (GH-008 based SCPH-18000 series)[edit | edit source]

Uses an identical form factor to the power supplies used in A and A+ chassis (GH-001 and GH-003), however, just like the B/B'/C/C' chassis power supplies, these power supplies output 12 V instead. Due to the identical form factor, it is mechanically possible to install an AB chassis power supply in an A/A+ chassis console; however, this would damage the console by overvolting it!

Specifications
Wattage 72 to 84 W (unconfirmed)
Output voltage 12 V Never install these power supplies in an 8.5 V console (A/A+ chassis)!
Max output amperage 6 to 7 A (unconfirmed)
Input voltage 100 V (Japan)
Input frequency 50 / 60 Hz

Models[edit | edit source]

Nichicon[edit | edit source]

  • ZSSR086JA (100 V); Sony part no. 1-476-629-11
AB chassis nichicon PSU top.jpg AB chassis nichicon PSU bottom.jpg
ZSSR086JA front ZSSR086JA back

Matsushita/Panasonic[edit | edit source]

  • ETXNY338J7A (100 V); Sony part no. 1-476-630-11

D/D'/F/G chassis (late SCPH-3x0xx series)[edit | edit source]

Used in later SCPH-3x0xx consoles across all regions. These power supplies are region-exclusive. Compared to earlier power supplies, the form factor has changed significantly.

Specifications
Wattage 74.4 W (Delta Electronics ADP-75EP B)
Output voltage 12 V
Max output amperage 6.2 A (Delta Electronics ADP-75EP B)
6 to 7 A (Matsushita PSUs, unconfirmed)
Input voltage 100 V (Japan)

120 V (USA)

220 V - 240 V (Europe - Asia)

Input frequency 50 / 60 Hz

Models[edit | edit source]

Delta Electronics[edit | edit source]

  • ADP-75EP B (120 V); Sony part no. 1-468-634-11 has a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink

Nichicon[edit | edit source]

  • ZSSR093MA (120 V); Sony part no. 1-468-604-11
  • ZSSR186MA (120 V); Sony part no. 1-468-604-21
  • ZSSR186CA (120 V); Sony part no. 1-468-604-31
  • ZSSR291MA (120 V); Sony part no. 1-468-604-41
  • ZSSR291CA (120 V); Sony part no. 1-468-604-51
  • ZSSR094HA (220 V - 240 V); Sony part no. 1-468-605-11
  • ZSSR094ZA (220 V - 240 V); Sony part no. 1-468-605-21
  • ZSSR187HA (220 V - 240 V); Sony part no. 1-468-605-31
  • ZSSR????A (220 V - 240 V); Sony part no. 1-468-605-41 mentioned in SM, but there's no trace of it actually existing
  • ZSSR292HA (220 V - 240 V); Sony part no. 1-468-605-51
  • ZSSR292CA (220 V - 240 V); Sony part no. 1-468-605-61
  • ZSSR002JA (100 V); Sony part no. 1-468-610-11
  • ZSSR002ZA (100 V); Sony part no. 1-468-610-21
  • ZSSR185JA (100 V); Sony part no. 1-468-610-31
  • ZSSR104ZA (input voltage?); Sony part no. 1-468-670-11

Matsushita/Panasonic[edit | edit source]

All of these have a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink

  • ETXNY351A7A (120 V); Sony part no. 1-468-623-11
  • ETXNY351A7AA (120 V); Sony part no. 1-468-623-21 or -31 (several revisions?)
  • ETXNY351J7A (100 V); Sony part no. 1-468-659-11
  • ETXNY351J7AA (100 V); Sony part no. 1-468-659-21
  • ETXNY351E7A (220 V - 240 V); Sony part no. 1-468-691-11

H/I/J chassis (SCPH-5x0xx series)[edit | edit source]

Used in SCPH-5x0xx consoles. These power supplies are region-exclusive. Similar to the previous type at first sight, but different connector type and location for upside-down mounting.

Specifications
Wattage 86.4 W (Delta Electronics ADP-75JP C)
Output voltage 12 V
Max output amperage 7.2 A (Delta Electronics ADP-75JP C)
7 to 8 A (Matsushita PSUs, unconfirmed)
Input voltage 100 V (Japan)

120 V (USA)

220 V - 240 V (Europe - Asia)

Input frequency 50 / 60 Hz

Models[edit | edit source]

Delta Electronics[edit | edit source]

All of these have a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink

  • ADP-75JP B (120 V); Sony part no. 1-468-757-11
  • ADP-75JP D (120 V); Sony part no. 1-468-757-21
  • ADP-75JP C (220 V - 240 V); Sony part no. 1-468-760-11

X0ZIlvB.jpg
Picture of a leaky capacitor on an ADP-75JP C (220 V - 240 V), next to the heatsink. Notice the area on the PCB where dust adheres to, as well as green residue and corrosion on surrounding components' legs. The damage on the picture prevented the power supply from powering up; it instantly went into safety shutdown and then restarted, causing an audible periodic clicking sound. Replacing the capacitor and cleaning off the electrolyte residue on the PCB and surrounding components fixed this power supply. This is a known issue with all "fat" PS2 Delta PSUs.

Nichicon[edit | edit source]

  • ZSSR257JA (100 V); Sony part no. 1-468-726-11
  • ZSSR257CA (100 V); Sony part no. 1-468-726-21
  • ZSSR257YA (100 V); Sony part no. 1-468-726-41
  • ZSSR258CA (120 V); Sony part no. 1-468-755-21
  • ZSSR256HA (220 V - 240 V); Sony part no. 1-468-758-11
  • ZSSR256CA (220 V - 240 V); Sony part no. 1-468-758-21
  • ZSSR????A (220 V - 240 V); Sony part no. 1-468-758-31 mentioned in SM, but there's no trace of it actually existing
  • ZSSR????A (220 V - 240 V); Sony part no. 1-468-758-41 mentioned in SM, but there's no trace of it actually existing
  • ZSSR305CA (220 V - 240 V); Sony part no. 1-468-792-21

Matsushita/Panasonic[edit | edit source]

All of these have a known issue with leaky or dry electrolytic capacitors (no visible bulge!), especially the small capacitor next to the heatsink

  • ETXNY406J8A (100 V); Sony part no. 1-468-725-11
  • ETXNY406J8AA (100 V); Sony part no. 1-468-725-21
  • ETXNY406A8A (120 V); Sony part no. 1-468-756-11
  • ETXNY406A8AA (120 V); Sony part no. 1-468-756-21
  • ETXNY406A8AB (120 V); Sony part no. 1-468-756-31
  • ETXNY406E8A (220 V - 240 V); Sony part no. 1-468-759-11
  • ETXNY406E8AA (220 V - 240 V); Sony part no. 1-468-759-21

P/R chassis (slim SCPH-900xx series)[edit | edit source]

Power supplies present in the SCPH-900xx models are universal and work with any line voltage.

Specifications
Wattage 33.75 W
Output voltage 7.5 V
Max output amperage 4.5 A
Input voltage 100 V - 250 V
Input frequency 50 / 60 Hz

Models[edit | edit source]

Delta Electronics[edit | edit source]

  • EADP-34BF B (100 V - 250 V); Sony part no. 1-474-082-11
  • EADP-34CF A (100 V - 250 V); Sony part no. 1-474-119-11
PBwKcED.jpg JargTHn.jpg IM8Mm2a.jpg
EADP-34CF(A) power supply (mains plug side). EADP-34CF(A) power supply (low voltage plug side). EADP-34CF(A) power supply (PCB).

External power supplies[edit | edit source]

K/L/M chassis (slim SCPH-700xx to SCPH-770xx series)[edit | edit source]

All of these power supplies have the Sony model number SCPH-70100.

In early 2005, it was found that some slim PS2 power supplies manufactured from August to December 2004 were defective and contained a component that could overheat. Affected was the Hipro model (HP-AT048H03, but not HP-AT048H03B) with a datecode from 2004.08 up to including 2004.12. The units were recalled by Sony and replaced by a 2005/2006/2007 model.

Specifications
Wattage 48 W (Approximate)
Output voltage 8.5 V
Max output amperage 5.65 A
Input voltage 100 V - 240 V
Input frequency 50 / 60 Hz
XKPrWP5.jpg X8Em06d.jpg
SCPH-70100 power supply (front). SCPH-70100 power supply (back).

Models[edit | edit source]

Delta Electronics[edit | edit source]

  • ADP-50VH
  • ADP-50VHB
  • EADP-48AB
  • EADP-48CB

Hipro Electronics[edit | edit source]

  • HP-AT048H03 This model has been subject to a partial recall (see above)
  • HP-AT048H03B

Nichicon[edit | edit source]

  • ZSSR422Z

N chassis (slim SCPH-790xx series)[edit | edit source]

All of these power supplies have the Sony model number SCPH-79100.

Specifications
Wattage 38 W (Approximate)
Output voltage 8.5 V
Max output amperage 4.5 A
Input voltage 100 V - 240 V
Input frequency 50 / 60 Hz
L92X2gn.jpg N5LhyXg.jpg
SCPH-79100 power supply (front). SCPH-79100 power supply (back).

Models[edit | edit source]

Delta Electronics[edit | edit source]

  • EADP-40CB

PSX power supplies[edit | edit source]

Specifications
Wattage approx. 96 - 108 W
Output voltage 12 V
Max output amperage 8 to 9 A (unconfirmed)
Input voltage 100 V (Japan)
Input frequency 50 / 60 Hz

Interface[edit | edit source]

(DESR-7500) 1x4 Through-pin socket. Two pins +12V, two pins ground. Pins closest to the corner of the board are +12V. No special signalling seen.

Models[edit | edit source]

It seems that 1-468-805-xx and 1-468-806-xx are for PSX1 (XPD-001 motherboard) while 1-468-868-xx and 1-468-869-xx are for PSX2 (XPD-005 motherboard).

Nichicon[edit | edit source]

  • ZSSR343JA (100 V); Sony part no. 1-468-805-11 for PSX1/XPD-001
  • ZSSR414JA (100 V); Sony part no. 1-468-868-11 for PSX2/XPD-005
  • ZSSR414JA (100 V); Sony part no. 1-468-868-12 for PSX2/XPD-005

Matsushita/Panasonic[edit | edit source]

  • ETXNY499J9A (100 V); Sony part no. 1-468-806-11 for PSX1/XPD-001
  • ETXNY499J9AA (100 V); Sony part no. 1-468-869-11 for PSX2/XPD-005
  • ETXNY499J9AA (100 V); Sony part no. 1-468-869-12 for PSX2/XPD-005 (on some units, the 2 at the end of the part no. has been re-printed over a 1)
Ux2OeOv.jpg ZemTE2y.jpg
DESR-7700 Matsushita power supply (front). DESR-7700 Matsushita power supply (back).
Retrieved from "http://www.psdevwiki.com/ps2/index.php?title=Power_Supply&oldid=4307"