SysCon

Overview

Syscon handles power, power-LEDs, tray loading (in conjunction with MechaCon, which actually controls the tray and the blue LED), front buttons and some thermal management.

It only exists on consoles up to the SCPH-390XX series (GH-022 board) (as well as system 246/256). After that, it's functionality was overtaken by the new Dragon-MechaCon.

On B/B'/C/C' chassis consoles, it's located on a daughter board (GD-011 for B-chassis, GD-012 for B'-chassis, GD-013 for C and C' chassis), together with RTC, EEPROM, clock battery and part of the voltage regulation circuitry.

Arcade SysCon

On Namco System 246 and System 256, the SysCon has some extra functionalities. The most notable extra functionality is the Arcade watchdog, which is basically a 5 minute timer to shut down the system.

One of the Mechacon CMDs that is involved on authentication of memory cards resets this timer if it's performed on a COH-H10020 security dongle at port 1 (mc0:).

Hardware

Syscon is always a Toshiba TMP87C807U. It has a Mask-ROM of 8 Kilobytes (8 K x 8 bits) and a RAM of 256 Bytes (256 x 8 bits).

Pictured above is a SysCon with firmware 2C64 on a GH-015 board.

Firmware revisions

• 1G78 (GH-001, GH-003) (A/A+ chassis)
• 1V33 (GD-011, GD-012) (B/B' chassis)
• 1V86 (?) (Namco System 246/256 in all? variants, probably also System 147/148?)
• 2A69 (GD-013, GH-008, GH-010, GH-012, GH-013, GH-014, GH-016) (AB/C/C'/D/D' chassis), MPU-001 (PS2-board of DTL-T15000)
• 2C64 (GH-015, GH-017, GH-018, GH-019, GH-022) (F/G chassis)