Test points/MechaCon UART: Difference between revisions
(→GH-051) |
(→GH-06X) |
||
| Line 107: | Line 107: | ||
====GH-061==== | ====GH-061==== | ||
''On the top side, next to the Ethernet connector''<br/> | |||
[[File:Slim79.png|200px]] | |||
====GH-062==== | ====GH-062==== | ||
''Identical to GH-061''<br/> | |||
===GH-07X=== | ===GH-07X=== | ||
Revision as of 21:29, 26 August 2023
These are the test points exposing MechaCon's UART interface e.g. for CDVD Drive calibration using PMAP. These test points have also been used by Sony service centers using official service tools.
Source of some of these pictures
To put the console into service mode, the RMC/test mode test point needs to be grounded. This is necessary when recalibrating the drive and doing other stuff.
Depending on how you connect to the console, you might have to swap RX and TX with each other.
The publicly available service tools only support consoles up to the G-chassis (up to including SCPH-37000 and SCPH-39000 series).
PMAP additionally supports H and I chassis consoles (most SCPH-50000 series consoles).
Currently missing on this wiki (please contribute):
- Most slim ps2 test points
- Test points for GH-008, GH-016, GH-017, GH-018, GH-026, GH-027, GH-029
Playstation 2 Fat Motherboard Models
GH-00X
GH-001
GH-003
Identical to GH-001
GH-004
Identical to GH-005
GH-005
GH-006
GH-007
Identical to GH-006
GH-008
GH-01X
GH-010
GH-012
Identical to GH-010
GH-013
Identical to GH-010
GH-014
Identical to GH-010
GH-015
GH-016
GH-017
GH-018
GH-019
GH-02X
GH-022
Identical to GH-019
GH-023
GH-026
GH-027
GH-029
Playstation 2 Slim Motherboard Models
GH-03X
GH-032
GH-035
GH-036
GH-037
GH-04X
GH-040
GH-041
GH-05X
GH-051
GH-052
GH-06X
GH-061
On the top side, next to the Ethernet connector
GH-062
Identical to GH-061
GH-07X
GH-070
Identical to GH-072
GH-071
Identical to GH-072
GH-072
On the top side, next to the Ethernet connector
PSX Motherboard Models
XPD-001
Identical to XPD-005
XPD-005
