DSP: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
Used for signal processing as part of the CD/DVD drive. Not to be confused with [[MechaCon]] in this matter, which controls and adjusts the drive mechanics and the laser among other functions. | Used for signal processing as part of the CD/DVD drive. Not to be confused with [[MechaCon]] in this matter, which controls and adjusts the drive mechanics and the laser among other functions. | ||
DSP firmware resides in a mask-ROM inside the DSP. Several firmware versions might exist for the same DSP hardware revision. | |||
Some versions of the DSP's firmware (specifically in SCPH-5XXXX and SCPH-70XXX consoles) have a tendency to crash MechaCon by sheer bad luck or on badly readable discs (e.g. badly burned/low-quality DVD-R discs or scratched originals), overvolting the focus/tracking coils of the laser and killing them and also the driver IC in the process. Several hardware-based mitigations/"fixes" have been developed by the community to address this issue with varying degrees of success. The most well known of these fixes have been the "Romeo-mod"/"LA-fix" for SCPH-5XXXX consoles and "summ0ne's fix" for SCPH-70XXX consoles; however, the most reliable fix is the Matrix PIC fix. | |||
== Revisions == | == Revisions == | ||
| Line 9: | Line 13: | ||
** ''GH-016?'' | ** ''GH-016?'' | ||
*CXD3098Q (GH-017, GH-019, GH-022, GH-023, GH-026, GH-027, GH-029, GH-032, GH-035, GH-036, GH-037, GH-040, GH-041, GH-051, GH-052, XPD-001, XPD-005) | *CXD3098Q (GH-017, GH-019, GH-022, GH-023, GH-026, GH-027, GH-029, GH-032, GH-035, GH-036, GH-037, GH-040, GH-041, GH-051, GH-052, XPD-001, XPD-005) | ||
** Units used on GH-023 to GH-035 have a bug in their firmware which causes MechaCon to freeze when bad sectors are read (e.g. on burnt or scratched discs) | |||
*CXD3098AQ (GH-061, GH-062, GH-070, GH-071, GH-072) | *CXD3098AQ (GH-061, GH-062, GH-070, GH-071, GH-072) | ||
Revision as of 21:31, 22 July 2022
Used for signal processing as part of the CD/DVD drive. Not to be confused with MechaCon in this matter, which controls and adjusts the drive mechanics and the laser among other functions.
DSP firmware resides in a mask-ROM inside the DSP. Several firmware versions might exist for the same DSP hardware revision.
Some versions of the DSP's firmware (specifically in SCPH-5XXXX and SCPH-70XXX consoles) have a tendency to crash MechaCon by sheer bad luck or on badly readable discs (e.g. badly burned/low-quality DVD-R discs or scratched originals), overvolting the focus/tracking coils of the laser and killing them and also the driver IC in the process. Several hardware-based mitigations/"fixes" have been developed by the community to address this issue with varying degrees of success. The most well known of these fixes have been the "Romeo-mod"/"LA-fix" for SCPH-5XXXX consoles and "summ0ne's fix" for SCPH-70XXX consoles; however, the most reliable fix is the Matrix PIC fix.
Revisions
- CXD1869Q (GH-001, GH-003)
- GH-008?
- CXD1869AQ (GH-004, GH-005, GH-006, GH-007, GH-010, GH-012, GH-013, GH-014)
- CXD1869BQ (GH-010, GH-012, GH-013, GH-014)
- CXD1886Q (GH-013, GH-014, GH-015)
- GH-016?
- CXD3098Q (GH-017, GH-019, GH-022, GH-023, GH-026, GH-027, GH-029, GH-032, GH-035, GH-036, GH-037, GH-040, GH-041, GH-051, GH-052, XPD-001, XPD-005)
- Units used on GH-023 to GH-035 have a bug in their firmware which causes MechaCon to freeze when bad sectors are read (e.g. on burnt or scratched discs)
- CXD3098AQ (GH-061, GH-062, GH-070, GH-071, GH-072)