Editing SPEED

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
== Overview ==
== Overview ==
SPEED provides various interfaces to the PS2, including Ethernet, where it functions as a MAC (using an external Ethernet transceiver/PHY), IDE/ATA and an UART (to which the modem connects in case of the north-american-only SCPH-10281 [[Network Adaptor]] and some north-american SCPH-700XX PS2 slim variants). It's connected to the PS2-side via [[DEV9C]]. For fat models, it comes inside the network adaptor. For slim models, it comes on the motherboard for SCPH-700XX consoles, with the IDE pins still exposed on the PCB, making it possible to connect a hard drive (which is, however, not practical in most cases, as it requires a lot of wires and soldering). Starting with SCPH-750XX consoles, SPEED was not used anymore, as its functions of an network controller were integrated into the newly developed PPC405-based [[IOP/Deckard]], with the IDE interface being removed entirely.
SPEED provides various interfaces to the PS2, including Ethernet, where it functions as a MAC (using an external Ethernet transceiver/PHY), IDE/ATA and an UART (to which the modem connects in case of the north-american-only SCPH-10281 [[Network Adaptor]] and some north-american SCPH-700XX PS2 slim variants). It's connected to the PS2-side via [[SSBUS_controller|SSBUS]] (PCMCIA in SCPH-1X000 consoles). For fat models, it comes inside the network adaptor. For slim models, it comes on the motherboard for SCPH-700XX consoles, with the IDE pins still exposed on the PCB, making it possible to connect a hard drive (which is, however, not practical in most cases, as it requires a lot of wires and soldering). Starting with SCPH-750XX consoles, SPEED was not used anymore, as its functions of an network controller were integrated into the newly developed PPC405-based [[IOP/Deckard]], with the IDE interface being removed entirely.


[[PSX]] has two SPEED-ICs, with one of them being a CXD9731GP (which is probably only used as IDE interface for the DVR DVD drive) and the other one being a physically larger [[CXD9764GP]] (which is a special variant only found in PSX).
[[PSX]] has two SPEED-ICs, with one of them being a CXD9731GP (which is probably only used as IDE interface for the DVR DVD drive) and the other one being a physically larger [[CXD9764GP]] (which is a special variant only found in PSX).
Please note that all contributions to PS2 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS2 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)