Editing SPEED
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 1: | Line 1: | ||
== Overview == | == Overview == | ||
SPEED provides various interfaces to the PS2, including Ethernet, where it functions as a MAC (using an external Ethernet transceiver/PHY), IDE/ATA and an UART (to which the modem connects in case of the north-american-only SCPH-10281 [[Network Adaptor]] and some north-american SCPH-700XX PS2 slim variants). It's connected to the PS2-side via [[ | SPEED provides various interfaces to the PS2, including Ethernet, where it functions as a MAC (using an external Ethernet transceiver/PHY), IDE/ATA and an UART (to which the modem connects in case of the north-american-only SCPH-10281 [[Network Adaptor]] and some north-american SCPH-700XX PS2 slim variants). It's connected to the PS2-side via [[SSBUS_controller|SSBUS]] (PCMCIA in SCPH-1X000 consoles). For fat models, it comes inside the network adaptor. For slim models, it comes on the motherboard for SCPH-700XX consoles, with the IDE pins still exposed on the PCB, making it possible to connect a hard drive (which is, however, not practical in most cases, as it requires a lot of wires and soldering). Starting with SCPH-750XX consoles, SPEED was not used anymore, as its functions of an network controller were integrated into the newly developed PPC405-based [[IOP/Deckard]], with the IDE interface being removed entirely. | ||
[[PSX]] has two SPEED-ICs, with one of them being a CXD9731GP ( | [[PSX]] has two SPEED-ICs, with one of them being a CXD9731GP (see list below) and the other one being a (physically larger) [[CXD9764GP]]. | ||
Additionaly, it is connected to an external 1k Bit / 128 Bytes EEPROM in both, the Network Adaptor and in SCPH-700XX consoles. In the PSX, the EEPROM is connected to the larger [[CXD9764GP]]. | Additionaly, it is connected to an external 1k Bit / 128 Bytes EEPROM in both, the Network Adaptor and in SCPH-700XX consoles. In the PSX, the EEPROM is connected to the larger [[CXD9764GP]]. | ||
The die of SPEED | The die of SPEED has some IBM-markings, which suggest it's been manufactured and potentially developed by IBM. | ||
== Revisions == | == Revisions == | ||
* 1.1: CXD9624GG (used in some earlier [[Network Adaptor]] revisions, including the SCPH-10190 PCMCIA Network Adaptor) | * 1.1: CXD9624GG (used in some earlier [[Network Adaptor]] revisions, including the SCPH-10190 PCMCIA Network Adaptor) | ||
** IBM | ** Manufactured/developed by IBM? [https://www.icreversing.com/chips/cxd9624gg see here] | ||
* 1.2: CXD9624AGG (used in some earlier [[Network Adaptor]] revisions, including the SCPH-10190 PCMCIA Network Adaptor) | * 1.2: CXD9624AGG (used in some earlier [[Network Adaptor]] revisions, including the SCPH-10190 PCMCIA Network Adaptor) | ||
** Adds UART interface for modem (also available in all later revisions) | ** Adds UART interface for modem (also available in all later revisions) | ||
* 1.3: CXD9731GP (used in later [[Network Adaptor]] revisions) | |||
* 1.3: CXD9731GP (used in later [[Network Adaptor]] revisions | * 1.3: CXD9731AGP (same version reported as the non-PSX CXD9731GP, used in all K-chassis/SCPH-700XX slim consoles) | ||
* 1.4: CXD9731GP (same chip identifier as 1.3, used in all PSX revisions, provides additional PSX-specific interfaces: DVR and Flash) | |||
* 1.3: CXD9731AGP (same version reported as | ** Additionaly has interfaces to on-board flash memory and the DVR-portion of the console enabled (probably using the mysterious [[CXD9764GP]] as an interface?) | ||
** | |||
Later slim consoles don't have a dedicated SPEED chip anymore, as the functionality has been integrated into [[IOP]]. These consoles report SPEED version 1.3. | Later slim consoles don't have a dedicated SPEED chip anymore, as the functionality has been integrated into [[IOP]]. These consoles report SPEED version 1.3. | ||