Editing PSX
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 343: | Line 343: | ||
== Disc Drive == | == Disc Drive == | ||
The PS2-part of the drive is based on the H/I chassis SCPH-500xx/5500x fat PS2 drive, both electrically and mechanically. The whole drive assembly is connected to the motherboard using 3 flat flex cables: One is an IDE connection to the dedicated drive board of the PSX-part, one provides power (5V, 12V, GND) and also connects the PS2-part sled motor to the motherboard (since it is controlled by the motherboard directly), and one connects the | The PS2-part of the drive is based on the H/I chassis SCPH-500xx/5500x fat PS2 drive, both electrically and mechanically. The whole drive assembly is connected to the motherboard using 3 flat flex cables: One is an IDE connection to the dedicated drive board of the PSX-part, one provides power (5V, 12V, GND) and also connects the PS2-part sled motor to the motherboard (since it is controlled by the motherboard directly), and one connects the KHS-400C PS2-part pickup to the motherboard, since it is also directly controlled by the motherboard. The spindle motor is always controlled by the dedicated PSX-part drive electronics over IDE, even in PS2 mode. | ||
Two different models have been made; the older one is used in DESR-x000 and x100, the newer one in DESR-x500 and x700. The drive has an updatable firmware for the PSX-mode part of the drive; at least the newer drive actually received such an update (Sony model name: DW-DX02A, known firmware versions: 0YX7 Sep 15 2004, BV1M Mar 08 2005). | Two different models have been made; the older one is used in DESR-x000 and x100, the newer one in DESR-x500 and x700. The drive has an updatable firmware for the PSX-mode part of the drive; at least the newer drive actually received such an update (Sony model name: DW-DX02A, known firmware versions: 0YX7 Sep 15 2004, BV1M Mar 08 2005). | ||
* DESR-x000 and DESR-x100 drive | * DESR-x000 and DESR-x100 drive | ||
** Uses Sony | ** Uses Sony KWS-200A optical pickup | ||
[[File:8UIuNSN.jpg|200px]] | [[File:8UIuNSN.jpg|200px]] | ||
* DESR-x500 and DESR-x700 drive | * DESR-x500 and DESR-x700 drive | ||
** Uses Sanyo | ** Uses Sanyo SF-DB11 optical pickup | ||
[[File:XkMxA6G.jpg|200px]] | [[File:XkMxA6G.jpg|200px]] | ||
Line 374: | Line 374: | ||
** Fairchild FAN8035L (6-CH Motor Driver, used as driver for focus, tracking, tilt, sled) | ** Fairchild FAN8035L (6-CH Motor Driver, used as driver for focus, tracking, tilt, sled) | ||
** ST KF25 (2.5V low drop voltage regulator) | ** ST KF25 (2.5V low drop voltage regulator) | ||
** On the pickup: | ** On the pickup: Sony CXA2640ER (Laser Diode driver) | ||
=== Integrated Circuits (MA-S43, used in DESR-x500 and DESR-x700) === | === Integrated Circuits (MA-S43, used in DESR-x500 and DESR-x700) === | ||
Line 394: | Line 383: | ||
** IC603: Mediatek MT1828E (main DVD-drive/burner controller, includes microcontroller/s, DSP, EnDec etc., no public datasheet available) | ** IC603: Mediatek MT1828E (main DVD-drive/burner controller, includes microcontroller/s, DSP, EnDec etc., no public datasheet available) | ||
*** Pinout available from some PC DVD drive's schematics | *** Pinout available from some PC DVD drive's schematics | ||
*** | *** Likely has one or more 80C32/MCS-51 8-Bit microcontroller cores as other Mediatek chipsets from that time do. | ||
*** Has a debug header on board; see above for pinout | *** Has a debug header on board; see above for pinout | ||
* ROM and Flash | * ROM and Flash | ||
Line 411: | Line 400: | ||
** IC403: ST KF25 (2.5V low drop voltage regulator) | ** IC403: ST KF25 (2.5V low drop voltage regulator) | ||
** IC1000: Fairchild FAN8035L (6-CH Motor Driver) | ** IC1000: Fairchild FAN8035L (6-CH Motor Driver) | ||
** On the pickup: | ** On the pickup: Elantec/Intersil EL6833CLZ (Laser Diode driver) | ||
=== Notes === | === Notes === | ||
* Contrary to some information on the internet, the drive does NOT seem to be married to the individual console. It is however likely that you can not replace the older drive type by the newer type or vice versa (needs verification, please contribute), due to different specifications and features, despite identical electrical interfaces (which is just IDE/ATA through a 50 pin flat flex cable). | * Contrary to some information on the internet, the drive does NOT seem to be married to the individual console. It is however likely that you can not replace the older drive type by the newer type or vice versa (needs verification, please contribute), due to different specifications and features, despite identical electrical interfaces (which is just IDE/ATA through a 50 pin flat flex cable). | ||
* Several variants of the Sanyo | * Several variants of the Sanyo SF-DB11 pickup exist, with only some of them being compatible with the PSX. Trying to install an incompatible one will (sometimes? always?) burn the flat flex cable and/or blow the 5V drive-power fuse on the motherboard depending on your luck (known compatible variants: bottom sticker number starts with DB11B; known incompatible revisions: bottom sticker number starts with DB11N, 11NX or 11NXL). It didn't seem to damage anything else though; most notably all electronics (after replacing the blown fuse) AND the laser pickup (after being installed into a compatible PC drive that uses this variant) survived. | ||
** These different types are seemingly actually called "SF-DB11B" (the one compatible with the PSX), "SF-DB11NS", "SF-DB11NX" and "SF-DB11NXL" (all three incompatible with PSX). These are best differentiated by the bottom sticker, not by the embossed revision number on the top. | ** These different types are seemingly actually called "SF-DB11B" (the one compatible with the PSX), "SF-DB11NS", "SF-DB11NX" and "SF-DB11NXL" (all three incompatible with PSX). These are best differentiated by the bottom sticker, not by the embossed revision number on the top. | ||
** Symptoms of a blown 5V fuse: | ** Symptoms of a blown 5V fuse: | ||
Line 423: | Line 411: | ||
*** The front USB port does not work | *** The front USB port does not work | ||
** [[File:jPNVCqr.jpg|200px]][[File:Vo2DfEx.jpg|200px]] | ** [[File:jPNVCqr.jpg|200px]][[File:Vo2DfEx.jpg|200px]] | ||
** Comparison of an compatible type (left) with an incompatible type (right) of | ** Comparison of an compatible type (left) with an incompatible type (right) of SF-DB11 with the bottom shielding removed:<br />[[File:UJjmXaf.jpg|200px]] | ||
* There is an official documentation of the | * There is an official documentation of the KWS-200A used in the DESR-x000 and DESR-x100 PSX, released by Sony itself:<br/> [[File:TxkqxiO.jpg|200px]] [[File:tyimnzA.jpg|200px]] | ||
== Motherboards == | == Motherboards == | ||
Line 652: | Line 640: | ||
| '''Dimension''' || 312 x 323 x 88mm(W x H x D) | | '''Dimension''' || 312 x 323 x 88mm(W x H x D) | ||
|- | |- | ||
| '''Weight''' || | | '''Weight''' || Approximately 5.8kg | ||
|- | |- | ||
| '''Accessories''' || | | '''Accessories''' || |