Editing Network Adaptor

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 4: Line 4:
=== Models ===
=== Models ===
==== SCPH-10190 ====
==== SCPH-10190 ====
* Only sold in Japan
* Only sold in japan
* Released in July 19, 2001
* Released in July 19, 2001
* Compatible with the early Japan-only PS2 models, SCPH-1X000 (A/A+/AB-chassis)
* Compatible with the early japan-only PS2 models, SCPH-1X000 (A/A+/AB-chassis)
* PCMCIA form factor
* PCMCIA form factor
* Has a connector to attach the official Japan-only external hard disk SCPH-20400 (power to the hard disk is provided using an additional external power supply)
* Has a connector to attach the official japan-only external hard disk SCPH-20400 (power to the hard disk is provided using an additional external power supply)
* Although Sony didn't intend it, it is compatible with DTL-T units (which are normally supposed to be used with specialized variants of the Network Adaptor)


==== SCPH-10250 ====
==== SCPH-10250 ====
* Only sold in Japan until it got replaced by the international SCPH-10350 in 2003
* Only sold in japan until it got replaced by the international SCPH-10350 in 2003
* Released in July 19, 2001
* Released in July 19, 2001
* Compatible with later fat PS2s (with expansion bay instead of PCMCIA-slot, SCPH-3XXXX and SCPH-5XXXX)
* Compatible with later fat PS2s (SCPH-3XXXX and SCPH-5XXXX)
* Provides an ATA/IDE connector, including power (power is provided by the console; no additional power supply required)
* Provides an ATA/IDE connector, including power (power is provided by the console; no additional power supply required)


==== SCPH-10281 ====
==== SCPH-10281 ====
* Only sold in North America
* Only sold in north america
* Released in August 27, 2002
* Released in August 27, 2002
* Compatible with later fat PS2s (with expansion bay, thus every fat PS2 model that was sold outside of Japan)
* Compatible with later fat PS2s (with expansion bay)
* Provides an ATA/IDE connector, including power (power is provided by the console; no additional power supply required)
* Provides an ATA/IDE connector, including power (power is provided by the console; no additional power supply required)
* Additionaly includes a 56k dial-up modem (dial-up service was only available in North America)
* Additionaly includes a 56k dial-up modem (dial-up service was only available in north america)


==== SCPH-10350 ====
==== SCPH-10350 ====
* Sold worldwide
* Sold worldwide
* Released in June 12, 2003 (earlier units were already available from May 2002 as part of the western release of the Linux kit)
* Released in June 12, 2003
* Compatible with later fat PS2s (with expansion bay, thus every fat PS2 model that was sold outside of Japan)
* Compatible with later fat PS2s (thus every fat PS2 that was sold outside of japan)
* Provides an ATA/IDE connector, including power (power is provided by the console; no additional power supply required)
* Provides an ATA/IDE connector, including power (power is provided by the console; no additional power supply required)
==== DTL-H10100 ====
The DTL-H10100 was used by DTL-H and DTL-T models. The Cable extension attached to the network port was probably added to make cable handling more comfortable when used on DTL-T models due to their considerable size.
[[File:PS2_DTL-H10100_NETWORK_ADAPTER.jpg|200px]]
==== DTL-H10040 ====
The DTL-H10040 was probably intended to be used only on the DTL-T units. It features the usual RJ45 network port, the HDD port for the DTL-H20400 and an additional RJ11 port.
[[File:PS2_DTL-H10040_NETWORK_ADAPTER.png|200px]]
[[File:PS2_DTL-H10040_NETWORK_ADAPTER_WITH_BOX.png|200px]]


=== Slim consoles ===
=== Slim consoles ===
Line 45: Line 33:


For K-chassis/SCPH-700XX-consoles, the components of the Network Adapter were simply soldered directly to the motherboard, thus making it possible to directly solder wires to the ATA/IDE pins of [[SPEED]] and connect an external hard drive that way (power to the hard drive must be provided externally). While possible, this is obviously not practical.</br>
For K-chassis/SCPH-700XX-consoles, the components of the Network Adapter were simply soldered directly to the motherboard, thus making it possible to directly solder wires to the ATA/IDE pins of [[SPEED]] and connect an external hard drive that way (power to the hard drive must be provided externally). While possible, this is obviously not practical.</br>
Additionaly, North American K-chassis consoles (SCPH-70011 and SCPH-70012) also have a small daughter board with a 56k modem, just like the North American SCPH-10281 Network Adaptor. The difference between SCPH-70011 and SCPH-70012 lies within the daughter board, with the SCPH-70011 daughter board (J20M001.30) being compliant with both, Canadian and US regulations, and the SCPH-70012 daughter board (J20M001.32) being compliant with just the US regulations.
Additionaly, north american K-chassis consoles (SCPH-70011, SCPH-70012) also have a small daughter board with a 56k modem, just like the north american Network Adaptor.
<gallery>
File:K chassis modem top.jpg|Modem daughter board from a SCPH-70011 console (top side)
File:K chassis modem bottom.jpg|Modem daughter board from a SCPH-70011 console (bottom side)
</gallery>
On later consoles (L-chassis/SCPH-750XX and later), the functionality of SPEED was integrated into the [[IOP]] with the ATA/IDE interface being dropped entirely, thus making it impossible to connect a hard drive no matter what.


Also any support for dial-up was removed for North America with late K-chassis/SCPH-70001 and later, just like the worldwide SCPH-10350 Network Adaptor and the Latin American late K-chassis/SCPH-70010 and later.
On later consoles (L-chassis/SCPH-750XX and later), the functionality of SPEED was integrated into the [[IOP]] with the ATA/IDE interface being dropped entirely, thus making it impossible to connect a hard drive no matter what. Also any support for dial-up was removed for north america.


== Board revisions ==
== Board revisions ==
Line 73: Line 56:
* ZM-027
* ZM-027
** SPEED: CXD9624GG
** SPEED: CXD9624GG
[[File:SCPH-10350_Rev_ZM-027_top_PCB.jpg|200px]] [[File:SCPH-10350_Rev_ZM-027_bottom_PCB.jpeg|200px]]
 
* BA-005
* BA-005
** SPEED: CXD9731GP
** SPEED: CXD9731GP
Please note that all contributions to PS2 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS2 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps2/Network_Adaptor"