Editing IOP/Deckard

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
==MIPS==
==IOP==


I/O processor - MIPS R3000A (PS1 main processor) used in PS2 since SCPH-10000 to SCPH-700XX. Runs at a 36.864 MHz or a 33.8688 MHz (underclocked when in compatibility mode) clock speed. It is connected to an external 2 MB EDO-RAM chip. Later got replaced by a new IOP based around a PowerPC 405 core, but with an additional MIPS core.
I/O processor - MIPS R3000A (PS1 main processor) used in PS2 since SCPH-10000 to SCPH-700XX. Runs at a 36.864 mHz clock speed. It is connected to an external 2 MB EDO-RAM chip. Later got replaced by a new IOP based around a PowerPC 405 core, but with an additional MIPS core.


=== Revisions ===
=== Revisions ===
* 1.5 : CXD9553GB  (GH-001, GH-003)
* 1.5 : CXD9553GB  (GH-001, GH-003)
* ??? : CXD9590GB  (MPU-4 in DTL-T10000H)
* 1.15: CXD9619GB  (GH-004 - GH-014, GH-016)
* 1.15: CXD9619GB  (GH-004 - GH-014, GH-016)
* 2.0 : CXD9660GB  (early GH-015)
* 2.0 : CXD9660GB  (earlier GH-015)
* 2.1 : CXD9697GP  (late GH-015, erroneously listed as "CXD9697GB" in service manuals?)
* 2.1 : CXD9697GP  (later GH-015, erroneously listed as "CXD9697GB" in service manuals?)
* 2.1 : CXD9732GP  (very late GH-015, GH-017 - GH-022)
* 2.1 : CXD9732GP  (GH-017 - GH-022)
* 2.2 : CXD9783GP  (GH-023)
* 2.2 : CXD9783GP  (GH-023)
* 2.4 : CXD9798GP  (some GH-026 boards, some GH-029 boards)
* 2.4 : CXD9798GP  (GH-026, maybe J-chassis GH-027 / GH-029?)
* 2.4 : CXD9799GP  (PSX XPD-001/XPD-005, some Namco System 256, some K-chassis slim boards, some GH-026 boards, maybe J-chassis GH-029?)
* 2.4 : CXD9799GP  (PSX: XPD-001, XPD-005, maybe J-chassis GH-027 / GH-029?, some K-chassis slim boards, Namco System 256)
* 2.4 : CXD9799AGP (some Namco System 256, some K-chassis slim boards, Namco System 147, Namco System 148)
* 2.4 : CXD9799AGP (some K-chassis slim boards, Namco System 147, Namco System 148)


==PowerPC==
==DECKARD==


PowerPC 405 chip that replaced IOP and [[SPEED]] since SCPH-750XX model. It is connected to an external 4 MB DDR-SDRAM chip. The first 2Mb were reserved to be used as the RAM of the emulated IOP, the other 2Mb are used by the DECKARD emulator, however, between the emulator itself and some lookup tables found on RAM, it doesn't consume all available RAM.
PowerPC 405 chip that replaced IOP and [[SPEED]]. It is connected to an external 4 MB DDR-SDRAM chip. In IOP emulator mode 2MB are used as a IOP memory. In PS2 used since SCPH-750XX model. New chip require some compatibility tweaks that are done per title by xparam file found in PS2 BOOTROM.
If these lookup tables get relocated,  up to 966kb of free RAM can be obtained without breaking the DECKARD emulator.


Note: There is some support hardware inside the PPC IOP for the emulation. It's not purely software emulation.
Note: There is some evidence that the new IOP might still additionaly contain some kind of MIPS core.


[https://www2.informatik.hu-berlin.de/~fwinkler/psvfpga/amirix/405_um.pdf Documentation]
[https://www2.informatik.hu-berlin.de/~fwinkler/psvfpga/amirix/405_um.pdf Documentation]
[http://psx-scene.com/forums/f19/deckard-ppc-iop-discussion-157416/#post1215298 More info]
[http://psx-scene.com/forums/f19/deckard-ppc-iop-discussion-157416/#post1215298 More info]
PPC monitor, a homebrew application that runs on this CPU, has some documentation about it, how it works and how to run code on it along the DECKARD emulator.
https://israpps.github.io/PPC-Monitor/
===Compatibility modes===
The addition of this PPC CPU required some compatibility modes added. They're enabled/disabled by the rom0:XPARAM IRX module. The console had a database of games that needed compatibility modes, rom0:PS2LOGO was in charge of looking at this database and applying the patches. Games were also capable of providing compatibility modes on their own by adding a '''PARAM2''' field on their system.cnf file. Wich consisted on the XPARAM config value followed by an MD5 checksum for integrity checks (to avoid applying the XPARAM if the data was corrupted).
There were only found two revisions of this compatibility mode database, one included on SCPH-750xx, and the second one was used on SCPH-770xx and never got updated again.
Information about this database and the actual databases can be found on some notes that got recently added to the [https://github.com/ps2homebrew/Open-PS2-Loader/tree/master/notes/xparam OpenPS2Loader repository]


=== Revisions ===
=== Revisions ===
* 3.0 : CXD9796GP (SCPH-750XX series/L-chassis)
* 3.0 : CXD9796GP (SCPH-750XX series/L-chassis)
**As the only IOP revision to do so, '''this revision needs heatsinking!'''
** As the only IOP revision to do so, '''this revision needs heatsinking!'''
*3.0 : CXD9209GP (SCPH-770XX series/M-chassis)
* 3.0 : CXD9209GP (SCPH-770XX series/M-chassis)
 
Starting with N-chassis/SCPH-790XX, the IOP was integrated into the new main SoC ([[Emotion Engine#Revisions|CXD2976GB]]) together with its RAM. It still reports as version 3.0 in software.
<br>Note: IOP revision (3.0) is taken from COP0 PRid which on models with PowerPC is actually emulated. So returned revision is just hardcoded value from DECKARD software IOP emulator file.


although the DECKARD emulator reports different compilation dates across different slim models (compilation date is printed at emulator startup over it's UART), it seems Sony never updated the emulator, just recompiled it.
Starting with N-chassis/SCPH-790XX, the IOP was integrated into the new main SoC together with its RAM. It still reports as version 3.0 in software.


=== UART ===
===TLB Entries===
The PowerPC CPU also had an UART. Unlike the EE UART, Sony had no actual use for it, so the pads aren't even tinned.
{| class="wikitable"
|-
! Virtual!!Physical!!Size!!Endian (Big/little)!!RWX!!Write-Through!!Cache Inhibit!!Memory Coherence!!Guarded!!User-defined storage attribute Un n=[0-3]!!Notes
|-
|0xFFE00000||0xFFE00000||0x00100000||B||RX ||1||0||0||0||-||DECKARD's BOOT ROM PPC440 BOOT ROM: 0xFFE00000 - 0xFFFFFFFF (2MB)
|-
|0xFFF00000||0xFFF00000||0x00100000||B||RX ||1||0||0||0||-||DECKARD's BOOT ROM
|-
|0x00000000||0x00200000||0x00100000||L||RW ||1||0||0||0||2||IOP RAM low 1MB mirror virtual R3000 IOP instructions use
|-
|0x00100000||0x00300000||0x00100000||L||RW ||1||0||0||0||2||IOP RAM high 1MB mirror
|-
|0x00200000||0x00200000||0x00100000|| ||  || || || || || ||IOP RAM low 1MB mirror
|-
|0x00300000||0x00300000||0x00100000|| ||  || || || || || ||IOP RAM high 1MB mirror
|-
|0x00400000||0x00200000||0x00100000|| ||  || || || || || ||IOP RAM low 1MB mirror
|-
|0x00500000||0x00300000||0x00100000|| ||  || || || || || ||IOP RAM high 1MB mirror
|-
|0x00600000||0x00200000||0x00100000|| ||  || || || || || ||IOP RAM low 1MB mirror
|-
|0x00700000||0x00300000||0x00100000|| ||  || || || || || ||IOP RAM high 1MB mirror
|-
|0xDFE00000||0x00200000||0x00100000||L||R  ||1||0||0||0||2||IOP RAM low 1MB mirror NOT:EE SIF (SBUS) IOP mem. window ? most likely:DECKARD 'supervisor' ??
|-
|0xDFF00000||0x00300000||0x00100000||L||R  ||1||0||0||0||2||IOP RAM high 1MB mirror
|-
|0x00000000||0x00000000||0x00100000||L||RW ||0||1||0||0||-||1MB Invalid these two segments are the same! one maps to 0x00200000 and the other to 0  Switcing the valid entries is done in code.
|-
|0x00100000||0x00100000||0x00100000||L||RW ||0||1||0||0||-||1MB Invalid
|-
|0x00200000||0x00000000||0x00100000||L||  || || || || || ||
|-
|0x00300000||0x00100000||0x00100000||L||  || || || || || ||
|-
|0x00400000||0x00000000||0x00100000||L||  || || || || || ||
|-
|0x00500000||0x00100000||0x00100000||L||  || || || || || ||
|-
|0x00600000||0x00000000||0x00100000||L||  || || || || || ||
|-
|0x00700000||0x00100000||0x00100000||L||  || || || || || ||
|-
|0xDFE00000||0x00000000||0x00100000||L||R  ||0||1||0||0||-||1MB Invalid
|-
|0xDFF00000||0x00100000||0x00100000||L||R  ||0||1||0||0||-||1MB Invalid
|-
|0x00A00000||0x00A00000||0x00100000||B||RWX||1||0||0||0||-||1MB DECKARD file RAM loading segment (code & data)||
|-
|0x00BE0000||0x00B60000||0x00001000||B||RW ||0||0||0||0||-||4kB Some variables and flags...?
|-
|0x00BFF000||0x00B7F000||0x00001000||B||RW ||0||0||0||0||-||4kB PPC stack?
|-
|0x00BDF000||0x00B7F000||0x00001000||B||R  ||0||0||0||0||-||4kB
|-
|0x00B40000||0x00B40000||0x00000400||L||RW ||0||1||0||0||-||1kB PS1DRV fetch GP1 commands from that region. in a loop that read 0xB40004,
then in every iteration 0x10 is added to address, after reaching 0xB003F4 loops
start from 0xB40004 again.
|-
|0x00B40400||0x00B40400||0x00000400||L||RW ||0||1||0||0||-||1kB PS1DRV send per title compatibility flags to that region.
|-
|0x00B40C00||0x00FFFC00||0x00000400||L||RW ||0||1||0||0||-||1kB The physical addr. of this is in the last 1kB of the 16MB of IOP RAM.
|-                                                             
|0x01000000||0x40000000||0x00000400||B||RW ||0||1||0||1||-||1kB PPC devices: PPC UART is here
|-                                                             
|0x40000000||0x00200000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM low 1MB mirror
|-                                                             
|0x40100000||0x00300000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM high 1MB mirror
|-                                                             
|0x40200000||0x00200000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM low 1MB mirror
|-                                                             
|0x40300000||0x00300000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM high 1MB mirror
|-                                                             
|0x40400000||0x00200000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM low 1MB mirror
|-                                                             
|0x40500000||0x00300000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM high 1MB mirror
|-                                                             
|0x40600000||0x00200000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM low 1MB mirror
|-                                                             
|0x40700000||0x00300000||0x00100000||L||RW ||1||0||0||0||2||1MB IOP RAM high 1MB mirror
|-
|0x12000000||0x10000000||0x01000000||L||RW ||0||1||0||1||2||16MB IOP devices - Dev#10 Dev9_2, Dev#12 Dev9_3 ??
|-                                                             
|0x13000000||0x11000000||0x01000000||L||RW ||0||1||0||1||2||16MB Dev9/SPEED - placed here sor some reason rather than at 0x10000000.
|-
|0x1D000000||0x1D000000||0x00000400||L||RW ||0||1||0||1||2||1kB SIF SBUS BDn regs on EE, accessed through SBUS
|-
|0x1E000000||0x1E000000||0x01000000||L||RW ||0||1||0||1||2||16MB Dev#1 ROM-DVD /CS1
|-
|0x1F402000||0x1F402000||0x00000400||L||RW ||0||1||0||1||2||1kB Dev#5 CDVD /CS5
|-
|0x1F7FFC00||0x00B00400||0x00000400||L||RW ||0||1||0||1||2||1kB Cache ?
|-                                                             
|0x00BDE800||0x00B00000||0x00000400||L||R  ||0||0||0||0||-||1kB Cache. Status reg?
|-                                                             
|0x00BDEC00||0x00B00400||0x00000400||L||R  ||0||0||0||0||-||1kB Cache. Status reg?
|-                                                             
|0x1F801000||0x1F801000||0x00001000||L||RW ||0||1||0||1||2||4kB IOP devices (DMAC, SSBUSC,...) and Dev#4 SPU /CS4
|-                                                             
|0x1F802000||0x1F802000||0x00001000||L||RW ||0||1||0||1||2||4kB Dev#8 Exp2 /EXTR (PIO)
|-                                                             
|0x1F803000||0x1F803000||0x00001000||L||RW ||0||1||0||1||2||4kB Dev#8 Exp2 /EXTR (PIO)
|-                                                             
|0x1F808000||0x1F808000||0x00000400||L||RW ||0||1||0||1||2||1kB SIO2, iLink
|-                                                             
|0x1F900000||0x1F900000||0x00001000||L||RW ||0||1||0||1||2||4kB Dev#4 Hard-wired (not through SSBUSC address reg.) SPU2 regs.
|-                                                             
|0x1FC00000||0x1FC00000||0x00100000||L||RW ||0||1||0||1||2||1MB Dev#2 ROM-BOOT /CS2 0x1FC00000-0x1FFFFFFF 4MB
|-                                                             
|0x1FD00000||0x1FD00000||0x00100000||L||RW ||0||1||0||1||2||1MB Dev#2 ROM-BOOT /CS2
|-                                                             
|0x1FE00000||0x1FE00000||0x00100000||L||RW ||0||1||0||1||2||1MB Dev#2 ROM-BOOT /CS2
|-                                                             
|0x1FF00000||0x1FF00000||0x00100000||L||RW ||0||1||0||1||2||1MB Dev#2 ROM-BOOT /CS2
|-
|}
'''TLB entries = 54 (55?) up to here, of 64 maximum.
At this point the code gets the number of remaining TLB entries = 10 and disables them.
Then it sets-up 4 more entries, starting from 60:'''
{| class="wikitable"
|-
! Virtual!!Physical!!Size!!Endian (Big/little)!!RWX!!Write-Through!!Cache Inhibit!!Memory Coherence!!Guarded!!User-defined storage attribute Un n=[0-3]!!Notes
|-
|0x5F800400||0x00B00400||0x00000400||L||RW ||0||1||0||1||2||1kB IOP Cache / Scratchpad
|-
|0x5F800000||0x00B00000||0x00000400||L||RW ||0||1||0||1||2||1kB
|-
|0x1F800400||0x00B00400||0x00000400||L||RW ||0||1||0||1||2||1kB
|-
|0x1F800000||0x00B00000||0x00000400||L||RW ||0||1||0||1||2||1kB
|-
|}


The signals use 3.5V logic levels and baud rate of 57600 bps
===Per game configuration===


[[File:PPC-UART.png|200px]]
Deckard to keep better compatibility use some flags/settings selected per Title ID. List of configurations is stored in rom:XPARAM, and in internal list in PS1DRV. Default values are listed in table below.  


=== AUX Coprocessor===
{| class="wikitable"
PowerPC series 4xx offer AUX port which functionality is similar to MIPS "COPx" solution. Not much is known about this component publicly. PS2 scene mentioned things like "[https://www.psx-place.com/threads/eject-tray-elf.19072/page-2#post-216993 Deckard SDK] " or dumping bootrom for this chip. This suggest that chip was fully reverse engineered in private circle.
|-
! Command !! Value !! Name
|-
|0x00 ||0x1F4||PARAM_MDEC_DELAY_CYCLE
|-
|0x01||    0x7D0||PARAM_SPU_INT_DELAY_LIMIT
|-           
|0x02||      0x23||PARAM_SPU_INT_DELAY_PPC_COEFF
|-           
|0x03||    0x7D0||PARAM_SPU2_INT_DELAY_LIMIT
|-           
|0x04||      0x14||PARAM_SPU2_INT_DELAY_PPC_COEFF
|-           
|0x05||        0||PARAM_DMAC_CH10_INT_DELAY
|-           
|0x06||        1||PARAM_CPU_DELAY
|-           
|0x07||      0x20||PARAM_SPU_DMA_WAIT_LIMIT
|-           
|0x08||        0||PARAM_GPU_DMA_WAIT_LIMIT
|-           
|0x09||        0||PARAM_DMAC_CH10_INT_DELAY_DPC
|-           
|0x0A||        0||PARAM_CPU_DELAY_DPC
|-           
|0x0B||        0||PARAM_USB_DELAYED_INT_ENABLE
|-           
|0x0C||        0||PARAM_TIMER_LOAD_DELAY
|-          
|0x0D||    0x229C||PARAM_SIO0_DTR_SCK_DELAY
|-          
|0x0E||    0x6EC||PARAM_SIO0_DSR_SCK_DELAY_C
|-          
|0x0F||    0x6EC||PARAM_SIO0_DSR_SCK_DELAY_M
|-
|0x10||          1||PARAM_MIPS_DCACHE_ON
|-            
|0x11||      0x90||PARAM_CACHE_FLASH_CHANNELS
|-
|}


====Opcodes Encoding====
'''Example settings from XPARAM file. '''
Guessed from assembly code, this section can be highly inaccurate.


Bits      Description
{| class="wikitable"
|-
00...05 - PPC OP identificator (all 0 for aux)
! Name !! Command !! Value !! Title ID
06...10 - A = Destination register for result from aux
|-
11...15 - B = Source register for arg to Aux
|PARAM_CPU_DELAY||6||0xB60||SLPS_250.72
16...20 - C = Seems to be used as second arg register
|-
21...27 - Function ?
|PARAM_MIPS_DCACHE_ON||0x10||0||SLPS_250.72
28...29 - Unknown, always 1 is opcodes used by Deckard emulator
|-
30...31 - Unknown, always 0 is opcodes used by Deckard emulator
|PARAM_CACHE_FLASH_CHANNELS||0x11||0x10||SLPS_250.79
                                  OP    A    B    C    func. unk
|-
For example, opcode 0x0003020C (000000 00000 00011 00000 0000010 1100) is used to set IOP/PS1 PC on Aux side using r3 PPC register as a source.
|PARAM_CPU_DELAY||6||0xC80||SLPS_250.79
|-
|PARAM_DMAC_CH10_INT_DELAY||5||0x3E8||SLPS_250.79
|}
Please note that all contributions to PS2 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS2 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps2/IOP/Deckard"