Editing DSP
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 1: | Line 1: | ||
Used for signal processing as part of the CD/DVD drive. Not to be confused with [[MechaCon]] in this matter, which | Used for signal processing as part of the CD/DVD drive. Not to be confused with [[MechaCon]] in this matter, which controls and adjusts the drive mechanics and the laser among other functions. | ||
DSP firmware resides in a mask-ROM inside the DSP. Several firmware versions might exist for the same DSP hardware revision. | DSP firmware resides in a mask-ROM inside the DSP. Several firmware versions might exist for the same DSP hardware revision. | ||
At least one version of the DSP's firmware (specifically the CXD3098Q) has a tendency to crash MechaCon by sheer bad luck or on badly readable discs (e.g. badly burned/low-quality DVD-R discs or scratched | At least one version of the DSP's firmware (specifically the CXD3098Q) has a tendency to crash MechaCon by sheer bad luck or on badly readable discs (e.g. badly burned/low-quality DVD-R discs or scratched originals), overvolting the focus/tracking coils of the laser and killing them and also the driver IC in the process. Several hardware-based mitigations/"fixes" have been developed by the community to address this issue with varying degrees of success. The most well known of these fixes have been the "Romeo-mod"/"LA-fix" for SCPH-5XXXX consoles and "summ0ne's fix" for SCPH-70XXX consoles; however, the most reliable fix is the Matrix PIC fix which monitors communication between DSP and MechaCon and turns off the console when a crash occurs. | ||
== Revisions == | == Revisions == | ||
*CXD1869Q (GH-001, GH-003) | *CXD1869Q (GH-001, GH-003) | ||
* | ** ''GH-008?'' | ||
*CXD1869AQ (GH-004, GH-005, GH-006, GH-007 | *CXD1869AQ (GH-004, GH-005, GH-006, GH-007, GH-010, GH-012, GH-013, GH-014) | ||
*CXD1869BQ (GH-010, GH-012, GH-013, GH-014) | *CXD1869BQ (GH-010, GH-012, GH-013, GH-014) | ||
*CXD1886Q (GH-013, GH-014, GH-015) | |||
*CXD1886Q (GH-013, GH-014, GH-015 | ** ''GH-016?'' | ||
** | *CXD3098Q (GH-017, GH-018, GH-019, GH-022, GH-023, GH-026, GH-027, GH-029, GH-032, GH-035, GH-036, GH-037, GH-040, GH-041, GH-051, GH-052, XPD-001, XPD-005) | ||
** Has a bug in the firmware which causes MechaCon to freeze when bad sectors are read (e.g. on burnt or scratched discs). This likelyhood is increased on Dragon-[[MechaCon]], thus SCPH-5XXXX and up. Some later subrevisions of GH-032 and GH-035 implement some circuitry to prevent this from happening. | |||
*CXD3098Q (GH-017, GH-018, GH-019, GH-022, GH-023, GH-026, GH-027, GH-029, GH-032, GH-035, GH-036, GH-037, GH-040, GH-041, GH-051, GH-052 | *CXD3098AQ (GH-061, GH-062, GH-070, GH-071, GH-072) | ||
** Has a | |||
*CXD3098AQ ( | |||