Editing Bios

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
== Content ==
===Content===


Here is an overview of what is contained in a PS2 ROM (including TOOL, DESR/PSX, ps2emu/ps2gxemu/ps2softemu (PS3), System 246 and System 256).
Here is an overview of what is contained in a PS2 ROM (including TOOL, DESR/PSX, ps2emu/ps2gxemu/ps2softemu (PS3), System 246 and System 256).
Line 8: Line 8:
! File !! Description !! Remarks
! File !! Description !! Remarks
|-
|-
| ACDEV || Arcade ROM device service. ||
| entry 1 || ||  
|-
|-  
| ADDDRV || Adds support for the DVD ROM (rom1:), via ROMDRV. ||
| entry 2 || ||  
|-
| ADDROM2 || Adds support for rom2 (which contains a Chinese font file), only for Chinese consoles (SCPH-50009). ||
|-
| APPLOAD || IOP application loader (according to a printf string found on it).  Seems to be an IRX module capable of running other IRX modules, since it processes modload return values and more|| system 246/256 exclusive, has debug symbols and ELF header pointer to entrypoint is null for some reason.
|-
| ATAD || The DEV9+ATAD(+Flash device) combo driver. First appearing in ROM v1.10. Has no support for the CXD9566R. Despite its similar name, it is very different from the full ATAD module. ||
|-
| BNNETCNF || not entirely sure what this is for, but it appears in the PS3's PS2 ROMs. Seems to be for network configuration, but why? || Needs to be at a fixed offset in ROM.
|-
| BOARDINF || reads in the DSW602 board's ID and sets up the values for Boot Modes 6 and 7. Only does something useful on TOOL units. ||
|-
| BTNB01 || ||
|-
| BUILD || ||
|-
| CDVDFSV || The RPC server for CDVDMAN. ||
|-
| CDVDMAN || The CD/DVD manager. ||
|-
| CLEARSPU || Clears/resets the SPU2 by setting the registers to a known state and zeroing SPU2 memory. If the SPU2 asserts an interrupt when this library is active, it will cause a bus error due to the fact that the callback function is set to NULL. Only used by the OSDSYS of the SCPH-10000 and SCPH-15000, probably retained for backward-compatibility. Appears to use an older version of the libspu2 library. ||
|-
| CMN01 || EE code overlay for DVD player loaded after DVDPL* (after 256 byte alignment) ||
|-
| CMN02 || EE code overlay for DVD player loaded at a location after CMN01 ||
|-
| D2ELOADP || DECI2 ELOADP extension (ERX module support). ||
|-
| DAEMON || Security dongle check loop. basically imports the McDetectCard2 from MCMAN (export 22) and calls it once per minute || system 246/256 exclusive. Has debug symbols. listed on arcade IOPBTCONF but commented.
|-
| DBCMAN || ||
|-
| DECI1 || DECI1 manager. Purpose of its existence is not known. ||
|-
| DECI1DR1 || DECI1 H1500 driver. Purpose unknown. ||
|-
| DECI1DRP || DECI1 PIF/mini-RA driver. Purpose unknown. ||
|-
| DECI2 || DECI2 manager. ||
|-
| DECI2DRP || DECI2 PIF driver ||
|-
| DECI2DRS || DECI2 SIF2 driver. ||
|-
| DECI2FILE || DECI2 host (and TTY) driver. ||
|-
| DECI2HSYN || DECI2 Host SYNchronization driver. Notifies the DECI2 manager when the host interface (i.e. PIF) is up. ||
|-
| DECI2KPRT || DECI2 KTTY driver. ||
|-
| DECI2LOAD || DECI2 IOP module loader. ||
|-
| DECKARD || The SCPH-7500x has a newer PowerPC processor in place of the IOP, and requires code to emulate the IOP. || Needs to be at a fixed offset in ROM.
|-
| DMACMAN || DMA Controller Manager. ||
|-
| DVDCNF || Contains IOP boot configuration file for the DVD player. ||
|-
| DVDELF || DVD player executable for expansion-bay consoles. ||
|-
| DVDID || DVD player ID. SCPH-70000 (ROM v2.00) and later had universal DVD ROMs, hence the existence of DVDID* files for each region. ||
|-
| DVDIDA || ||
|-
| DVDIDC || ||
|-
| DVDIDE || ||
|-
| DVDIDJ || ||
|-
| DVDIDM || ||
|-
| DVDIDO || ||
|-
| DVDIDR || ||
|-
| DVDIDU || ||
|-
| DVDPLA || DVD player executable for slimlines. SCPH-70000 (ROM v2.00) and later had universal DVD ROMs, hence the existence of DVDPL* files for each region. ||
|-
| DVDPLC || ||
|-
| DVDPLE || ||
|-
| DVDPLJ || ||
|-
| DVDPLM || ||
|-
| DVDPLO || ||
|-
| DVDPLR || ||
|-
| DVDPLU || ||
|-
| DVDVER || DVD player version number. SCPH-70000 (ROM v2.00) and later had universal DVD ROMs, hence the existence of DVDVER* files for each region. ||
|-
| DVDVERA || ||
|-
| DVDVERJ || ||
|-
| DVDVERR || ||
|-
| EECONF || Loads 0x40 bytes of EEGS config and 0x20 bytes of OSD config from MECHACON EEPROM to a memory block which 0x3C0 points at. For 1.60+, 1.70+, 2.20+ ROMs, it configures an unknown device at 0xBF803204, 0xBF80146E, 0xB600000A, 0xBF801470, 0xBF801472, 0xBF803218. For 1.70+, 2.20+, PS3 ps2_emu ROMs, if high four bits at 0xBF80847C is set, device is configured related to 0xBF808414, 0xBF808400, 0xBF80844C, 0xBF808420, 0xBF808428, 0xBF808430. For 2.20+ ROMs, if high bit of 0xBF801450 is set, ROM region is read with SCMD 54/0x36 and patched using 0xFFFE0180 and 0xFFFE0184, MAC address is read with SCMD 55/0x37 and is loaded to 0xFFFE0188 and 0xFFFE018C, and 0xFFFE0190 is set to byte at offset 1 of EEGS config (config 0). ||  
|-
| EELOAD || The EE ELF loader, which is loaded by LoadExecPS2() to 0x00082000 for loading ELFs. ||  
|-
| EELOADCNF || Contains the IOP boot configuration file for EELOAD. ||
|-
| EENULL || The idle thread (id #0) module, loaded to 0x00081FC0. ||
|-
| EESYNC || For synchronizing with the EE, at the end of IOP resets. EESYNC from DNAS images are evil; they also perform a memory wipe of the region from 0x00084000 to .0x00100000. ||
|-
| EROMDRV || Encrypted ROM DRIver for the expansion-bay PlayStation 2 sets. ||
|-
| EROMDRVA || Encrypted ROM DRIver for the SCPH-70000 (ROM v2.00) and later PlayStation 2 sets. ||
|-
| EROMDRVC || ||
|-
| EROMDRVE || ||
|-
| EROMDRVJ || ||
|-
| EROMDRVM || ||
|-
| EROMDRVO || ||
|-
| EROMDRVR || ||
|-
| EROMDRVU || ||
|-
| ESDATA || ||
|-
| EXCEPMAN || Exception manager. ||
|-
| EXTINFO || Contains the "EXTINFO" for all files in the ROM image. ||
|-
| FILEIO || RPC server for IOMAN. Sony has greatly changed the semantics and design of FILEIO after some point. Connecting an old FILEIO EE RPC client to a newer server will result in a severe IOP crash. ||
|-
| FNTASCII || ||
|-
| FNTEX000 || ||
|-
| FNTEX001 || ||
|-
| FNTEXOSD || ||
|-
| FNTHANCH || Unknown. along GB18030, they're the only files inside rom2 ||
|-
| FNTIMAGE || Contains fonts for the OSDSYS of the SCPH-18000 and newer. ||
|-
| FONTM || The large FONT Module, used by the OSDSYS. ||
|-
| FONTS || The small FONT module, used by the OSDSYS. ||
|-
| GB18030 || Chinese FONT module, replace FONTM. Loaded from rom2: on SCPH-50009 || On PS2 that use it, this file is required to boot at all.
|-
| HDDLOAD || Update loader for the HDD unit (and later includes the flash device). ||
|-
| HDDOSD || Appears to perform a similar function as the OSD update for SCPH-1xxxx systems. Most likely a build artifact for testing purposes. || SCPH-3xxxx exclusive
|-
| HEAPLIB || Memory HEAP LIBrary (i.e. thvpool, thfpool). ||
|-
| HLPB01 || ||
|-
| HLPB02 || ||
|-
| HLPB03 || ||
|-
| HLPB04 || ||
|-
| HLPB05 || ||
|-
| HLPB06 || ||
|-
| HLPB07 || ||
|-
| HLPB08 || ||
|-
| HLPB09 || ||
|-
| HLPB10 || ||
|-
| HLPB11 || ||
|-
| HLPB12 || ||
|-
| HLPB13 || ||
|-
| HLPB14 || ||
|-
| ICOBCDDA || ||
|-
| ICOBDISC || ||
|-
| ICOBDVDD || ||
|-
| ICOBFBRK || ||
|-
| ICOBFNOR || ||
|-
| ICOBFSCE || ||
|-
| ICOBPKST || ||
|-
| ICOBPS1D || ||
|-
| ICOBPS1M || ||
|-
| ICOBPS2D || ||
|-
| ICOBPS2M || ||
|-
| ICOBQUES || ||
|-
| ICOBYSYS || ||
|-
| ICOIMAGE || Contains icons for the OSDSYS of the SCPH-18000 and newer. ||
|-
| IGREETING || Displays boot information (i.e. IOP boot type, EBOOTP, IBOOTP, switch positions for DSW602 and the type of DSW602 board installed). ||
|-
| ILINK || i.Link driver || present in only the arcade ROMs.
|-
| ILSOCK || i.Link socket driver || present in only the arcade ROMs.
|-
| INTRMANI || Interrupt Manager. According to wisi, it is for IOP mode. ||
|-
| INTRMANP || Interrupt Manager. According to wisi, it is for PS mode. Never used. ||
|-
| IOMAN || I/O Manager. ||
|-
| IOPBOOT || IOP bootup program. || Needs to be at a fixed offset in ROM.
|-
| IOPBTCON2 || Boot configuration file for the IOP, for the first phase of the IOP reset (before UDNL is loaded). ||
|-
| IOPBTCONF || Boot configuration file for the IOP, during the final phase of the IOP reset. If no UDNL module is specified, the IOP will only have a single IOP reset in the reboot process, with the modules listed in IOPBTCONF. In addition to listing modules to be loaded, this file can also tell the parser to parse another file. It is also capable of declaring a load address for the SYSMEM module ||
|-
| KERNEL || The EE kernel. ||
|-
| KROM || Kanji ROM? Not sure where this is used. || Needs to be at a fixed offset in ROM.
|-
| KROMG || || Needs to be at a fixed offset in ROM.
|-
| LED || Led setter module, simply calls the mechacon NCMD that would switch the blue led on retail PS2s (sceCdApplySCmd: 0x1c) probably related to the system 2x6 watchdog|| system 246/256 exclusive. Has debug symbols. listed on arcade IOPBTCONF but commented.
|-
| LGBB01 || ||
|-
| LGBB02 || ||
|-
| LGBB03 || ||
|-
| LGBB04 || ||
|-
| LGBB05 || ||
|-
| LIBFI || This is not present in the boot ROM of the SCPH-10000 and SCPH-15000. ||
|-
| LIBSD || Sound driver library. ||
|-
| LOADCORE || The core of IOP module loading. Provides the lowest level of IOP module loading functions. Also handles the startup of the IOP. ||
|-
| LOADFILE || The RPC server for MODLOAD. ||
|-
| LOGO || PS1 logo? ||
|-
| MBROWS || The browser module as a compressed EE raw binary. Only used by the old OSDSYS program from ROM v1.00 and v1.01. ||
|-
| MCLOCK || The clock module as a compressed EE raw binary. Only used by the old OSDSYS program from ROM v1.00 and v1.01. ||
|-
| MCMAN || Memory Card Manager. (DONGLEMAN on system 246/256) ||
|-
| MCMANO || MCMAN (Original).Probably the version of MCMAN wich was used to create DONGLEMAN, but without changes. only auths PS2 cards on mc1:/ || system 246/256 exclusive
|-
| MCSERV || RPC server for MCMAN. ||
|-
| MODLOAD || IOP module loader. ||
|-
| MOPEN || The opening module as a compressed EE raw binary. Only used by the old OSDSYS program from ROM v1.00 and v1.01. ||
|-
| MSGB01 || ||
|-
| MSGB02 || ||
|-
| MSGB03 || ||
|-
| MSGB04 || ||
|-
| MSGB05 || ||
|-
| MSGB06 || ||
|-
| MSGB07 || ||
|-
| MSGB08 || ||
|-
| MSGB09 || ||
|-
| MSGB10 || ||
|-
| MSGB11 || ||
|-
| MSGB12 || ||
|-
| MSGB13 || ||
|-
| MTAP || ||
|-
| NCDVDMAN || It is a strange abomination that was introduced and used with only the SCPH-70000 series, so it was probably provided for backward-compatibility. It seems to be a heavily stripped-down CDVDMAN module, with no support for some S-command functions like sceCdRI. I don't know why this was done, but it might be a deliberate move by Sony to prevent hackers from using these system functions. Didn't really do anything, however. ||
|-
| NUMB01 || ||
|-
| NUMB02 || ||
|-
| NUMB03 || ||
|-
| NUMB04 || ||
|-
| NUMB05 || ||
|-
| OLDROM || Contains a subset of ROM modules that are required for the late TOOL ROM to provide DEX-like functionality (i.e. old ROM modules). ||
|-
| OSBROWS || Contains metadata about the browser module. Used by the old OSDSYS program from ROM v1.00/v1.01. ||
|-
| OSCLOCK || Contains metadata about the clock module. Used by the old OSDSYS program from ROM v1.00/v1.01. ||
|-
| OSDCNF || Contains the IOP boot configuration for OSDSYS (mainly listing the X or P prefixed modules) ||
|-
| OSDSND || OSD sound library. This is a combination of the tentative libraries "libspu2", "libsnd2", "rspu2drv" from the PS2 runtime library, which are mostly ports from the PS1 runtime library. The changes to OSDSND from SCPH-18000 and newer is that it contains improvements to SPU2 AutoDMA code, larger thread stack size, more waits, and a fix to the timer quit code. However, it does not contain the VSync/Alarm based callback code that is in libsnd2 in SDK 1600. ||
|-
| OSDSYS || The browser. ||
|-
| OSDVER || Seems to be a build number for the OSD. ||
|-
| OSFONTM || Contains metadata about the large font. Used by the old OSDSYS program from ROM v1.00/v1.01. ||
|-
| OSFONTS || Contains metadata about the small font. Used by the old OSDSYS program from ROM v1.00/v1.01. ||
|-
| OSOPEN || Contains metadata about the opening module. Used by the old OSDSYS program from ROM v1.00/v1.01. ||
|-
| PADMAN || Pad manager. ||
|-
| PADMAN2 || ||
|-
| PATAD || ATAD module for DESR systems used in its OSDSYS program. ||
|-
| PCDVDFSV || CDVDFSV module for DESR systems used in its OSDSYS program. ||
|-
| PCDVDMAN || CDVDMAN module for DESR systems used in its OSDSYS program. ||
|-
| PDEV9 || DEV9 module for DESR systems used in its OSDSYS program. ||
|-
| PEESYNC || EESYNC module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PFILEIO || FILEIO module for DESR systems used in its OSDSYS program. ||
|-
| PFLASH || FLASH module for DESR systems used in its OSDSYS program. ||
|-
| PFLSLOAD || Flash load module for DESR systems used in its OSDSYS program. ||
|-
| PHDD || TIMEMAN module for DESR systems used in its OSDSYS program. ||
|-
| PHDDLOAD || HDDLOAD module for DESR systems used in its OSDSYS program. ||
|-
| PIOMAN    || IOMAN module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PIOPRP    || IOPRP 3.1.0 used for the PS3 ps2_emu OSDSYS program. ||
|-
| PLIBSD    || LIBSD module for DESR systems used in its OSDSYS program. ||
|-
| PLOADCORE || LOADCORE module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PLOADFILE || LOADFILE module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PMCMAN    || MCMAN module for DESR systems used in its OSDSYS program. ||
|-
| PMCSERV  || MCSERV module for DESR systems used in its OSDSYS program. ||
|-
| PMODHSYN  || MODHSYN (part of CSL) module for DESR systems used in its OSDSYS program. ||
|-
| PMODLOAD  || MODLOAD module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PMODMIDI  || MODMIDI module (part of CSL) for DESR systems used in its OSDSYS program. ||
|-
| PMODSESQ  || MODSESQ module (part of CSL) for DESR systems used in its OSDSYS program. ||
|-
| PMTAPMAN  || MTAPMAN module for DESR systems used in its OSDSYS program. ||
|-
| POWEROFF  || ||
|-
| PPADMAN  || PADMAN module for DESR systems used in its OSDSYS program. ||
|-
| PRMMAN2  || RMMAN2 module for DESR systems used in its OSDSYS program. ||
|-
| PROMDRV  || ROMDRV module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PS1DRV || The PlayStation driver. Sets up the EE for GPU emulation and resets the IOP into PS1 mode. ||
|-
| PS1ID || Only found in newer boot ROMs ||
|-
| PS1VER || ||
|-
| PS1VERA || ||
|-
| PS2LOGO || Displays the PlayStation 2 logo from the inserted disc. For newer consoles, if the logo cannot be decrypted properly, it will fall back to the browser. Not actually required to boot games, but the Sony OSDSYS boots PS2 games through this program. on DECKARD Systems it is also in charge of operating rom0:XPARAM ||
|-
| PSDRDRV    || SDRDRV module for DESR systems used in its OSDSYS program. ||
|-
| PSIFCMD    || SIFCMD module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PSIFMAN    || SIFMAN module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PSIO2MAN  || SIO2MAN module for DESR systems used in its OSDSYS program. ||
|-
| PSTDIO    || STDIO module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PSXVER    || Version of the ROM for DESR system. ||
|-
| PSYSCLIB  || SYSCLIB module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PSYSMEM    || SYSMEM module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PTHREADMAN || THREADMAN module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PTIMEMANI  || TIMEMAN module for DESR systems used in its OSDSYS program; code identical to IOPRP 2.8.0. ||
|-
| PXATAPI || ATAPI driver for the (the DVD writer of the) PSX. TXATAPI is used by TESTMODE of the PSX. ||
|-
| PXFROMMAN || Dev9 flash filesystem driver for DESR systems used in its OSDSYS program. ||
|-
| RDRAM || Provides a RDRAM test for the EE at power-on. This is run from RESET. ||
|-
| RDRAM1 || || Needs to be at a fixed offset in ROM.
|-
| RDRAM2 || || Needs to be at a fixed offset in ROM.
|-
| REBOOT || The reboot service. Receives IOP reset packets from the EE, from across the SIF. ||
|-
| RESET || Bootstrap code for the EE and IOP. || Needs to be at a fixed offset in ROM.
|-
| RMMAN || ReMote-con MANager for the external IR receiver. ||
|-
| RMMAN2 || ReMote-con MANager for the internal IR receiver (SCPH-50000 and later). ||
|-
| RMRESET || ReMote controller reset. ||
|-
| ROMDIR || The ROMDIR part of the ROM image. ||
|-
| ROMDRV || ROM driver. Provides access to the boot ROM (rom0). ||
|-
| ROMGSCRT || First appeared in ROM 1.60. Provides a portable method for manipulating GS screen modes. The SCPH-10000 and SCPH-15000 do not have this. || Needs to be at a fixed offset in ROM.
|-
| ROMVER || ROM version. specifies ROM version, console region letter, machine type letter and a date (presuably packing date?) || Needs to be at a fixed offset in ROM.
|-
| S147CTRL || System 147/148 control ||
|-
| S147MDEV || System 147/148 storage manager providing the "atfile" device ||
|-
| S147NAND || System 147/148 NAND/Flash driver interfaces with S147MDEV ||
|-
| S147NETB || System 147/148 an986 USB-Ethernet network booting using driver files from "atfile10" filesystem provided by S147MDEV ||
|-
| S147USBM || System 147/148 USB memory driver interfaces with S147MDEV ||
|-
| SBIN || PS1 BIOS kernel memory COFF file. This is loaded into kernel memory at 0x80000500 (-0x90 header), and contain A0/B0/C0 vector handlers, and more. On real PS1 this code is located at 0xBFC10000, and later also copied to 0x80000500 during bios initialization. ||
|-
| SDRDRV || Library for allowing the EE to remotely access the SPU2 via libsd. ||
|-
| SECRMAN || Security Manager. Signing is NOT done with the one in ROM, but with a special version that comes with the utility discs. Debug stations , TOOL, and PS3 units have a different SECRMAN module from retail sets.
SECRMAN from System246/256 is the same than special secrman, but with an extra function wich performs the security dongle auth routine.
|
|-
| SIFCMD || SIF command module. Contains the SIF command and SIF RPC functions. ||
|-
| SIFINIT || Initializes the SIF. ||
|-
| SIFMAN || SIF manager. ||
|-
| SIO2D || ||
|-
| SIO2MAN || SIO2 manager. Provides access to the SIO2 interface. ||
|-
| SNDBOOTB || ||
|-
| SNDBOOTH || ||
|-
| SNDBOOTS || ||
|-
| SNDCLOKS || ||
|-
| SNDIMAGE || Sound image. Contains sounds for the OSDSYS of the SCPH-18000 and newer. ||
|-
| SNDLOGOS || ||
|-
| SNDOSDDB || ||
|-
| SNDOSDDH || ||
|-
| SNDRCLKS || ||
|-
| SNDTM60S || ||
|-
| SNDTNNLS || ||
|-
| SNDWARNS || ||
|-
| SSBUSC || SSBUS Controller library. The SSBUS seems to be the bus that all peripherals get connected to. It seems to have the power to control the mapping of the device registers, as well as access timing. ||
|-
| SSDATA || ||
|-
| SSND || Arcade sound driver. Uses the libspu2 library. || System 246/256 exclusive, has debug symbols
|-
| STDIO || Standard I/O library. ||
|-
| SYSCLIB || System C Library. ||
|-
| SYSMEM || System Memory Manager. ||
|-
| TBIN || PS1 BIOS. This is started by RESET, when the IOP is in PS1 mode. || Needs to be at a fixed offset in ROM.
|-
| TDEV9 || Dev9 driver for the DESR used in TESTMODE. ||
|-
| TDVRDRV || DVR Driver for the DESR used in TESTMODE. ||
|-
| TDVRMISC || Miscellaneous DVR functionality driver for the DESR used in TESTMODE. ||
|-
| TESTMODE || Test mode program. The EE will boot this module from EELOAD, if the console is put into service mode by the SONY service jig. For expansion bay sets, it is a device that goes into the expansion bay, but connects to the chassis from within it (it does not connect to the expansion connector). ||
|-
| TESTSPU || Used by the TESTMODE program for testing the SPU. Depends on libsd. ||
|-
| TEXBARRW || ||
|-
| TEXBBTTN || ||
|-
| TEXBCDPB || ||
|-
| TEXBCPAR || ||
|-
| TEXBICHI || ||
|-
| TEXBNAV1 || ||
|-
| TEXBNAV2 || ||
|-
| TEXBOVAL || ||
|-
| TEXCBINV || ||
|-
| TEXCBLUR || ||
|-
| TEXCBUMP || ||
|-
| TEXCFLOW || ||
|-
| TEXCKABE || ||
|-
| TEXCKLFN || ||
|-
| TEXCKLFP || ||
|-
| TEXCKLGN || ||
|-
| TEXCKLGP || ||
|-
| TEXCMARU || ||
|-
| TEXCNAVI || ||
|-
| TEXCREFA || ||
|-
| TEXCSMOK || ||
|-
| TEXCSTSL || ||
|-
| TEXIMAGE || Texture image. Contains textures for the OSDSYS of the SCPH-18000 and newer. ||
|-
| TEXOBLP  || ||
|-
| TEXOBLPR  || ||
|-
| TEXOCRBL  || ||
|-
| TEXOCRLE  || ||
|-
| TEXOFLAR  || ||
|-
| TEXOFOG0  || ||
|-
| TEXOFOG1  || ||
|-
| TEXOFOG2  || ||
|-
| TEXOFOG3  || ||
|-
| TEXOFOG4  || ||
|-
| TEXOPNGD  || ||
|-
| TEXOPNGE  || ||
|-
| TEXOPNGF  || ||
|-
| TEXOPNGG  || ||
|-
| TEXOPNGI  || ||
|-
| TEXOPNGP  || ||
|-
| TEXOPNGS  || ||
|-
| TEXOREF  || ||
|-
| TEXOSCE  || ||
|-
| TEXOWAL0  || ||
|-
| THMON || Simple THread MONitor. Exists only in the late TOOL's ROM and system 246/256. ||
|-
| THPERF  || Found on the system 246/256 bios. For late TOOL, this module was removed and its functionality was combined into THMON. ||
|-
| THREADMAN || IOP thread manager. ||
|-
| TIMEMANI || Timer Manager (IOP mode) ||
|-
| TIMEMANP || Timer Manager (PS mode) ||
|-
| TIOPIMG || Modified IOPRP 2.8.0 used in DESR TESTMODE. ||
|-
| TPADMAN || PADMAN used by rom0:TESTMODE. ||
|-
| TSIO2MAN || SIO2MAN used by rom0:TESTMODE. ||
|-
| TXATAPI || ATAPI driver for the (the DVD writer of the) PSX. TXATAPI is used by TESTMODE of the PSX. ||
|-
| TZLIST || Timezone list, used by the OSD. Not present in the SCPH-10000 and SCPH-15000, which only saw a Japan-only release. ||
|-
| UDFIO || UDF driver used by the DVD Player. ||
|-
| UDNL || SilverBull calls this an UpDate DownLoader. Basically, it is responsible for selecting the modules and starting the IOP, during the final phase of the IOP reset where the desired modules are to be loaded into the IOP. ||
|-
| USBD || USB driver, which shows up in System 2x6 systems. ||
|-
| VBLANK || V-Blank management. ||
|-
| VERSTR || Version string. I think that the PS1 ROM will use this because I learned that this string is also present in PlayStation consoles. || Needs to be at a fixed offset in ROM.
|-
| XCDVDFSV || CDVDFSV module used in OSDSYS. ||
|-
| XCDVDMAN || CDVDMAN module used in OSDSYS. ||
|-
| XDEV9 || A cut down version of DEV9 used in OSDSYS. ||
|-
| XDEV9SERV || A RPC service for accessing the DEV9 driver directly. Presumably to obtain things like the MAC address. ||
|-
| XFILEIO || FILEIO module used in OSDSYS. ||
|-
| XFLASH || dev9 flash module used in OSDSYS. || SCPH-50xxx exclusive
|-
| XFROMMAN || dev9 flash filesystem module used in OSDSYS. || SCPH-50xxx exclusive
|-
| XLOADFILE || LOADFILE module used in OSDSYS. ||
|-
| XMCMAN || MCMAN module used in OSDSYS. ||
|-
| XMCSERV || MCSERV module used in OSDSYS. ||
|-
| XMTAPMAN || Multi-Tap Manager. XMTAPMAN is used by the expansion bay OSDSYS program. ||
|-
| XPADMAN || PADMAN module used in OSDSYS. ||
|-
| XPARAM || Updated module. File store per title ID settings. OSDSYS call XPARAM to check ID list for currently executed game/app. If ID is found on list, settings/flags are applied. ||
|-
| XPARAM2 || Updated module that seems to be used only in PS3. File store per title ID settings. OSDSYS call XPARAM2 to check ID list for currently executed game/app. If ID is found on list, settings/flags are applied. ||
|-
| XRMMAN2 || Module handling the IR sensor controlled by the Mechacon, used in OSDSYS. ||
|-
| XSHA1 || this only present in PS3. It is used as additional antipiracy check. It seems that it calculate disc main elf checksum and compares it with some database. ||
|-
| XSIFCMD || SIFCMD module used in OSDSYS. ||
|-
| XSIO2MAN || SIO2MAN module used in OSDSYS. ||  
|}
|}
Description source: https://gist.github.com/uyjulian/25291080f083987d3f3c134f593483c5
Description source: https://gist.github.com/uyjulian/25291080f083987d3f3c134f593483c5
== Boot Process ==
Since ROM is mapped for both IOP and EE reset vectors at the same address (0xBFC00000), Sony implements cpu detection based on PRid COP0 register value. First thing executed by either IOP or EE is MFC0 fetching PRid and performing check if ID is 0x58 or lower, if true, r3000 code will run (branch to 0xBFC02000), otherwise r5900 code is executed (branch to 0xBFC00800). From there both cpus perform respective tasks with code compatible to cpu architecture they run already. IOP code performs few tasks like clearing caches and setting up them depending on if it is PS1/PS2 mode. Now checks 0xBF801450 bit 3 again for PS1/PS2 mode detection, and search in ROM for either IOPBOOT or TBIN and jump to execution of one of those files. TBIN is real PS1 rom, and from time when it is executed r3000 side acts like PS1 CPU. Worth to note that r3000 side of PS2 ROM perform additional check for PRid 0x0F or lower (real PS1) and jumps to TBIN without 0xBF801450 bit 3 PS1/PS2 mode detection. Which suggest that if we flash first 512KB of PS2 rom into PS1, hardware should be functional to at least run games.
== Known Issues ==
=== Flush Cache t5/t6 corruption ===
PS1 mode FlushCache (A0:44) is altered comparing to one from PS1 bios. New version disables DMA by zero write to DCPR for the time when function run. This isn't issue per se, but to do that function use registers t5 and t6. While temp registers should be preserved by caller if needed, there is at least 1 game that rely on them to stay intact after returning from FlushCache. Mortal Kombat Trilogy (NTSC-U). This affect every PS2 model, also PS3 emulators since they use stripped PS2 bios to run PS1 games. Solution: On PS2 patch game image, on PS3 either patch game image or bios itself.
Please note that all contributions to PS2 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS2 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps2/Bios"