CD drive: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Overview == == Issues == == Adjustments == == Models ==") |
(→Models) |
||
| Line 6: | Line 6: | ||
== Models == | == Models == | ||
* KSM-440AAM | |||
** Compatible with PU-7, PU-8 and PU-16 boards (can in theory be mounted on PM-41 boards, but the cable doesn't have the reinforcement/pull-tab for the non-ZIF connector of PM-41) | |||
* KSM-440ABM | |||
** Compatible with PU-7, PU-8 and PU-16 boards (can in theory be mounted on PM-41 boards, but the cable doesn't have the reinforcement/pull-tab for the non-ZIF connector of PM-41) | |||
* KSM-440ACM | |||
** Compatible with PU-7, PU-8 and PU-16 boards (can in theory be mounted on PM-41 boards, but the cable doesn't have the reinforcement/pull-tab for the non-ZIF connector of PM-41) | |||
* KSM-440ADM | |||
** Compatible with PU-18 and PU-20 boards | |||
* KSM-440AEM | |||
** Compatible with PU-22 and PU-23 boards | |||
* KSM-440BAM | |||
** Compatible with PM-41 boards (PlayStation One) | |||
** Can be mounted on PU-7/PU-8/PU-16 boards after replacing the top plastic shield (these boards have a ZIF-connector, but installation works fine nonetheless) | |||
Revision as of 05:48, 17 October 2021
Overview
Issues
Adjustments
Models
- KSM-440AAM
- Compatible with PU-7, PU-8 and PU-16 boards (can in theory be mounted on PM-41 boards, but the cable doesn't have the reinforcement/pull-tab for the non-ZIF connector of PM-41)
- KSM-440ABM
- Compatible with PU-7, PU-8 and PU-16 boards (can in theory be mounted on PM-41 boards, but the cable doesn't have the reinforcement/pull-tab for the non-ZIF connector of PM-41)
- KSM-440ACM
- Compatible with PU-7, PU-8 and PU-16 boards (can in theory be mounted on PM-41 boards, but the cable doesn't have the reinforcement/pull-tab for the non-ZIF connector of PM-41)
- KSM-440ADM
- Compatible with PU-18 and PU-20 boards
- KSM-440AEM
- Compatible with PU-22 and PU-23 boards
- KSM-440BAM
- Compatible with PM-41 boards (PlayStation One)
- Can be mounted on PU-7/PU-8/PU-16 boards after replacing the top plastic shield (these boards have a ZIF-connector, but installation works fine nonetheless)