Media

From PSP Developer wiki
Revision as of 12:18, 16 June 2017 by Anonymous (Privacy policy)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Memory Stick Pinout[edit | edit source]

Memory Stick is a removable flash memory card format, used mostly in Sony portable hardware.

Variations includes the Memory Stick Pro, a revision that allows greater maximum storage capacity and faster file transfer speeds; Memory Stick Duo, a small-form-factor version of the Memory Stick (including the Pro Duo); and the even smaller Memory Stick Micro (M2). The Memory Stick is defined in the minds of many by its proprietary nature, as the majority of portable devices that use it are Sony and Sony Ericsson devices.

Memory stick is read or written by half-duplex serial protocol of three-wire system. Write speed is 1,800MB - 330KB/s. Depends on flash memory cell. Read speed is 2.45MB/s.

Memory Stick[edit | edit source]

Pin Signal Description
1 VSS Vss
2 BS Bus state signal
3 DATA1 Data1 Parallel / NC Serial
4 SDIO/DATA0 Data0 Parallel / Data Serial
5 DATA2 Data2 Parallel / NC Serial
6 INS Stick detect (connected to VSS)
7 DATA3 Data3 Parallel / NC Serial
8 SCLK Clock signal
9 VCC Vcc (2,7V - 3,6V)
10 VSS Vss

Notes:

  1. Serial interface protocol to transfer data on three signal lines: SCLK, BS, SDIO.
  2. Parallel interface protocol to transfer data on six signal lines: SCLK, BS, DATA [3:0].

Memory Stick M2[edit | edit source]

Pin Signal Description
1 BS
2 DATA1
3 DATA0
4 DATA2
5 INS
6 DATA3
7 SCLK
8 VCC
9 VSS
10 Reserved
11 Reserved