Button Combos

From PSP Developer wiki
Revision as of 13:32, 1 December 2023 by Anonymous (Privacy policy) (→‎Reset System Settings)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

PSP-E1000 Factory Service Mode[edit | edit source]

  • Your PSP must be fully powered off (not in sleep mode)
  • Plug in your PSP Street Jigkick mini-B USB and have the Baryon Sweeper software running
  • Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode
  • The code responsible for this combo is located in street syscon firmware

Reset System Settings[edit | edit source]

  • Your PSP must be fully powered off (not in sleep mode)
  • Hold Triangle + Square + Select + Start and turn on the PSP, keep buttons held until the boot animation appears
  • The code to toggle this is found in vshmain.prx

More System Information[edit | edit source]

  • Navigate to Settings > System Settings > System Information
  • Hold down LTrigger + RTrigger + Left Dpad + Square for a couple seconds (3) then let go and hold Start to display extra system information
  • To have it remain on screen until you exit System Information, press Left Dpad while holding Start, then release both
Retrieved from "http://www.psdevwiki.com/psp/index.php?title=Button_Combos&oldid=12214"