Button Combos

From PS3 Developer wiki
Revision as of 17:21, 10 June 2023 by Anonymous (Privacy policy) (→‎Web browser)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

More System Information[edit | edit source]

  1. Go to XMB Settings [Settings] > [System] > [System Information]
  2. Press simultaneously D-Pad LEFT Button + Dualshock L1 button + Dualshock R1 button + Dualshock square button for a few seconds
  3. Release those buttons then immediately press Dualshock start button and keep it held
  4. While holding Dualshock start button, press D-Pad LEFT Button once to have the menu stay up on it's own.

Note: More information: More System Information


QA[edit | edit source]

Getting the QA Flag Menu[edit | edit source]

Set your cursor on (not in) Network Settings and press the key combo (all at the same time):
D-Pad DOWN Button + Dualshock L1 button + Dualshock L2 button + Dualshock R1 button + Dualshock R2 button + Dualshock L3 button

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

Note: Requires QA-Flag enabled in EEPROM. More information: QA Flagging


Shop[edit | edit source]

Unlock Demonstration Mode[edit | edit source]

Note: Set your cursor on (not in) Security Settings and press the key combo (all at the same time):
Dualshock L1 button + Dualshock R1 button + Dualshock square button + Dualshock select button

Note: Requires unlock code afterwards. More information: Unlock Codes


Web browser[edit | edit source]

Unlock browser debug settings and information mode[edit | edit source]

The combo needs "Internet Browser Debug" from CEX debug setting to be set to "On"


New combo[edit | edit source]

Open the browser, hold Dualshock square button and press Dualshock triangle button


  • Thanks to haxxxen for sharing it's findings


Old combo[edit | edit source]

Open the browser then press simultaneously the combo:

Dualshock L1 button + Dualshock L2 button + Dualshock R1 button +Dualshock R2 button + Dualshock triangle button +Dualshock square button +Dualshock cross button + D-Pad RIGHT Button

It's a little bit difficult combo, but has interesting features like UI Settings > Motion type: 1 that enables coverflow for tabs.


  • Thanks to Luca93xD for sharing it's findings

PS2 Netemu[edit | edit source]

Unlock Configuration Mode and Debug Information Mode[edit | edit source]

Note: Inside a PS2 game, access the ps2netemu menu by pressing Dualshock PS button and press the key combo (all at the same time) for a few seconds:
Dualshock L1 button + Dualshock R1 button + Dualshock square button + D-Pad LEFT Button
then press Dualshock start button for two new options in netemu: Debug Information and Configuration.

  • Credits to picard for his awesome RE skills